Cannot save excise invoice

Hi Friends,
While saving the excise invoice i am facing with folllowing error.
BED : Debit = 120.00 Credit = 0.00 Diff = 120.00
Message no. 8I312
with regards

In addition to removing immidiate utilization also check if at
Logistics-General -> Tax on goods movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
you have maintained the following for the excise TT DLFC
DLFC                  CR        PLAAED
DLFC                  CR        PLAAT1
DLFC                  CR        PLABED
DLFC                  CR        PLACESS
DLFC                  CR        PLAECS
DLFC                  CR        PLASED
DLFC                  CR        RG23AED
DLFC                  CR        RG23AT1
DLFC                  CR        RG23BED
DLFC                  CR        RG23ECS
DLFC                  CR        RG23SED
DLFC                  DR        MSUSP

Similar Messages

Error while saving Excise Invoice- 'Balance in transaction currency'

Hi to all.
I am using TAXINN taxing procedure.Recently I applied notes for S&H cess legal changes. Everything working fine. But when I try to save excise Invoice system throws the following error. Amount Rs.53 is S&H Cess. If i removed condition type from pricing document is posted.So, can anybody tell me what settings to be made to correct this error?
Error message:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 53.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application

Dear Siva,
Please refer Master OSS note# 1032265-- Higher Education Changes.
May it wil help you to resolve ur problem.
Regards,
Venkat

Debit/credit -excise invoice

HI,
when we save excise invoice -ACCOUNTING DOCUMENT gets generated.
1. i want to know how system determines
Posting key
40 Debit (say Modvat suspense)
50-credit (say ed payable)
& also how tax code A1 is coimng in accounting document
PL let me kno where setting is done for these
Awaiting your valuable inputss

Credit & Debit Memo are Order Related Billing & Excise Invoice is created against Delivery. Hence Credit & Debit Memo cannot be created against Excise Invoice.
Incase, if Excise Amount is to be adjusted as Debit or Credit, it is recommended to do the same through Excise JV: J1IH
Regards,
Rajesh Banka
Edited by: Rajesh Banka on Jan 5, 2008 8:58 PM

How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendo

Hi All,
How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendor2 for a single purchase order?
The Scenario: PO is raised on Vendor2 for certain goods excisable and Vendor2 is not registered under Excise hence i cannot get Incoming excise invoice from Vendor2 or I cannot raise Excise invoice in B1 on the name of Vendor2.
But
the same goods (which are excisable) were already supplied by Vendor1 to Vendor2. So here the excise invoice is coming from Vendor1 and A/P Invoice from Vendor2 how this is actually handled in Business One? How do we show the A/P Invoice amount due on Vendor2 and the Excise Passed from Vendor1?
Thanks
SV Reddy

Hi Thanga Raj,
what you said is works only for payment consolidation. where in a particular purchase two vendors are involved, the tax updates should go into relevant vendor master data. in the above case excise is updated in the vendor1 account and RG23 also should be generated on the name of Vendor1.
Since you already raising incoming excise invoice on the name of Vendor1 you also need to raise A/P Invoice on Vendor1 (this is mandatory, from the goods receipt PO when you click copy to Incoming Excise Invoice and A/P Invoice the system automatically inserts "Vendor1")
but how do you update the Vendor2 account only for the A/P Invoice VAT portion. Because in reality the VAT you are paying to Vendor2 since you need to raise the a/P Invoice on the name of Vendor2. it is not actually happening in business one. If you try to raise A/P Invoice on Vendor2 from this Goods Receipt PO, initially the system copies Vendor1 from GRPO and if you change and try to add the invoice on Vendor2 name, the system will ask you to create a serial number again if the item is excisable. here the work is duplicated for the same item you already created a serial number while you creating the Goods Rectipt PO from Vendor1.
Any body knows any other scenario please help me.
Thanks
SV Reddy

Excise invoice number getting reflected in the reference field in VF01

Hello,
I require excise invoice number to get get reflected in the reference field of billing document number . (i.e accounting document generated from VF01)
Thanks,

Dear Muscan,,
As per STANDARD SAP PROCESS this functionality is not Possible. The reason is very clear, Excise Invoice is always created after creating billing/invoice document. Without creating excise invoice you cannot have excise invoice number reflected in the reference field of billing document.
Hope this clarifies your doubt?
Regards
MBS

Excise invoice cancellation

I have transferred 100 pieces from manufacturing plant to depot via Stock transfer Order.
Excise invoice of 100 pieces is made.
Due to some reason ,depot returns back 20 pieces to plant.
how should i cancel the excise invoice for 20 nos.
Plz help me out.

You cannot cancel excise invoice partially. Since this is return from depot please use the sales return process in the plant to take back the material.
You can use J1IEX >EWPO (without purchase order) or J1Ih > additional excise, to take back the credit for the 20 units which are returned.
J1IH is preferred because J1IEX looks for vendor.
J1IW is an obsolete transaction but can be used if you are in 46B version.

How to edit excise invoice ?

In stock Transfer process. We create pro-forma invoice ...Based on pro-forma invoice , we create Excise Invoice.
We are using a discount condition type ZABT. By mistake someone has deleted the Condition record for ZABT. There are 1000 Pro-Forma invoice without condition type ZABT and excise invoice subsequently. Because of this , excise values has been increased in proforma invoice as well as in excise invoice.
Now we have again maintained condition record for condition type ZABT. We have updated the proforma invoice and Condition type ZABT is inserted in the proforma invoice. Now the excise value in the proforma invoice has been corrected. But the same is not reflecting in already created excise invoice. Now we cannot edit excise invoice, as the accounting document has also been created. And also we cannot cancel such huge number of excise invoice. Now kindly advise to change the excise duties in already created excise invoice and update the excise accounting document.

Moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode. Please post all your CIN related queries here. Coming to the requirement, you cannot adjust the price difference in the already created excise invoices but you can pass a JV via J1IH
G. Lakshmipathi

Excise Invoice cannot be captured for RG1(Finished Goods) material

Dear Friends,
While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
Excise Invoice cannot be captured for RG1(Finished Goods) material
Message no. 4F276
The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
Pl help me how to get rid of this error.
Regards,
Ask

In GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
Regards,
Indranil

You cannot create ARE3 for duty paid Deemed exports excise invoice!

You cannot create ARE3 for duty paid Deemed exports excise invoice!
Message no. 4F326

Hi murali,
How can you create ARE document for duty paid excise invoice
ARE docs are for excise exption purpose only
regards
bvdv

Excise invoice quantity cannot be less than the quantity received

Hi,
I have done MIGO with part 1 entry but while doing J1IEX, I am getting an error message 4F109 : Excise invoice quantity cannot be less than the quantity received.
Please note that we have done MIGO with 5000 qty. and doing J1IEX with short 3000 qty.
Regards.

Hi,
For this case of "Part I" selected during GR, you need to create Excise invoice thro J1IEX -> Capture Excise Invoice -> Good receipt (use the material document number), which will complete the part II posting. Then you can proceed with MIRO.
With regards,
Jeeva.

Plant to Plant STO with excise invoice and taxes in one company code

Hi,
I have a new business requirement, we want to create only one company code and 12 plants in different states, each plant will have separate purchasing and sales activity this is ok this can be done with separate excise and series group as ther will not be any issue for purchsing and saling of materisl with exice in each plant , but how we can transfer the material plant to plant if the plant is in different states we want that the material should be transfer from palnt to plant with excise invoice only, as we have the company code common, how to create the billing document for this, and how to pass the duty from the saling plant and capture the same in the recieving plant. with proper tax entry. Can we do the STO with biiling if the two plants are in single compnay code.
regards,
zafar

hi,
I am trying to create a Stock Transport Order (STO) with document type UB and item category U. My objective is to transfer material from Plant (supplying plant) 100 to Plant (receiving plant) 1100 within one company code (1000) with STO.
For this purpose I created a raw material 1434 in plant 1000 with sales org 1 view and in that view entered in delivering plant field 1000 as delivery plant. After that I extended material 1434 to plant 1100 without changing anything what I did while creating the material first in Plant 1000 except in organizational level I entered 1100 in the plant field. I entered Sales org 1000 and distribution channel 10 in organization level for both plant while creating and extending the material. In me21n I chose Stock Transport Order with document type UB and item category as U also receiving Plant as 1100. With this when I tried to save the STO the message, I am getting an error, Cannot determine shipping data for the material 1434?
I am doing solely mm function why I need to create Customer master? In this case plant 1100 is the customer right?
Solution:
1. Mat.(1434) should be maintained in both the plants. (1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
    In Receiving plant (1100)                         In Supplying plant (1000)
    Customer num. 123345 (for ex.)              Customer num. -
(don't fill)
    Sales org.yyy
    Dist. Channel
    Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
    Position doc type is "UB"
    Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
6. Assign doc. Type is "UB" to u'r plants.(PO)
    Go for new entries
    Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
11. See the stock over view in the receiving & supplying plants.
thanking you

Problem while creating excise invoice by J1IJ

Hi Friends
I am creating excise invoice from delivery for a depot using T-c0de J1IJ . Problem is every time when I select RG23 in drop down menu after entering delivery no, excise gp and series gp and and save it, system gives error that item is incomplete so excise invoice cannot be generated.
Can anyone pls let me know what is the problem. I though found one things that there was no excise value in the J1IJ screen. i.e bed and other excise duties were 0, so could this be the problem?
Thanks
Amit

Hi Friends
Let em explain you the process so as to analyse the problem clearly.
this is a trading process. My client is creating PO in advance and not on teh basis of PR generated after sales order.
SO process they follow is create sales order, delivery, gate entry, weightment entry, PGI and then J1IJ and invoice.
Here plant is a depot, so it is some kind of a depot sales process.
Dear G. Lakshmipathi
As suggested by you, will J1IG process be relevant in this case?. If yes then on what basis PO will be genrated here as my client is not generateing any PR w.r.t to sales order. Please advice.
Waiting for your reviews.
Thanks

Creation of EXPORT EXCISE INVOICE (ARE1)

Hi,
Experts
When am cerating Export billing through(VF01) all the price and excise value is coming but while creating EXCISE INVOICE for EXPORT the EXCISE VALUE isnot flowing that means all the value remain zero .
1- So for this purpose how to creat an EXPORT EXCISE INVOICE(ARE1) & how EXCISE VALUE will come.
2- Pls try to explain the total process of EXPORT EXCISE INVOICE creation.
thanks
sunil

Hi sunil,
The process is as follows:
After you create the excise invoice use j1IA101 tcode to create the are-1. Ensure that your excise invoice has the relevant type i.e esport type and is not local.
In the opening screen enter you invoice number and also enter the relevant details such as document details, addresses, long texts etc. You also need to enter the details of the bond/LUT in the bond details tab.For this the bond should have been created.
Save your are-1.
The use post and open the saved are-1 document and fill the date and time of removal and post it.
After that you need to update it periodically. If you want to check it on the same day then enter the dates. Here the screen will change from the earlier screens where fields for uodation such as sent to customs, recived from customs, sent to excise and export confirmed fields ..... will appear. You need to enter the dates here. For a start enter the current date in all the fields.
check it now. If everything is AO.K you will get a document O.K message. If not maintian the details asked by the system.
Save it. When you do so you will get a message saying that you cannot change quantities after this.
confirm it and save it. This will confirm the export and all relevant entries will be made.
Just for an idea if you want check ..
When you post check the bond register in case of bond and you will see that the bond will be debited to the tune of the total duty. When the export is confirmed it will be credited back into the bond.
Ofcourse you need to maintina the bond and fill it in the ARE1 at the time of creation.
Use the area menu J1ILN which will load the Excise menu on your screen. This will have all the transactions relating to excise and use the exports under excise regulations path for your abov transactions instead od TCode. You will never have any problems of remembering the Tcodes for cenvat register, bond......
You can maintian the bond under master data in the same area menu.
TO go to the excise menu you just type the tcode J1ILN.
After referring the above please also refer to help.sap.com under Exports under excise regulation- ARE document. It will be very helpful for you as all the details are given here.
Thanks!
Preethi.

Number Range for Excise Invoice.(Urgent !!!)

Hi Gurus,
Scenario :
Business want's serial excise invoice numbers irrespective of the transaction it is excuting i.e If i am using local excise invoice or Export Excise invoice the excise invoice for both of them have to be in serial meaning if i have an local excise invoice number running at 191 and if i generate export excise invoice the excise invoice number should be 192.
Is this possible ? since the object for local excise invoice ( J_1IEXCLOC) and object for export excise invoice(J_1IEXCEXP) are different and the number range you assign to them cannot be same.
Kindly advice me how to handle this......Is there any user exit for this ???
Rgds
VIVEK.

Hi,
When you go to transaction code "SNUM" to create the number range, after entering the relevant object the system asks for the "series group". Try keeping the series group same for both the export as well as domestic sales. For creating the series group follow the path:
IMG - logistics general - tax on goods movement - India - Basic setings - Maintain series groups.
Here create a new one and save it.
IMG - logistics general - tax on goods movement - India - Business transactions - Outgoing Excise Invoices - Maintain Default Excise Groups and Series Groups.
Here for the combination of "sales area", "shippiong point", "plant", "excise group" enter the "series group". When you create the excise invoice in "J1IIN" at that time the system will automatically fetch the required excise group & series group.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

CIN : Excise invoice before Commercial Invoice

Hi All,
Please tell me how to configure TAXINN and CIN settings in case, when we want to create excise invoice before commercial invoice.
I know this can be done but don't know how, please help.
Thanks and regards
Amit

Hi Amit.,
TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from Maintenance screen, which you can Masterthe SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
REWARD if helpfull
Thanks & Regards
Narayana

Cannot save excise invoice

Similar Messages

Maybe you are looking for