Cannot save or load config

Having got my new 'TestCloud' 2TB drive configured, it's time to save the config. Unfortunately, both save and load config options are greyed out. Now, I'm sure I've seen this before, and it was an easy fix, but I can't remember. There's nothing in the manual, posts or Answers I can find. Any ideas?

Tried wired Ethernet with Android, both chrome and Firefox. No joy.Tried your chrome desktop mode. No joy. Aha! Has to be desktop site for the MyCloud UI page; I thought it was a global chrome setting (goes off to look for one...)Tried Opera on Wii access. No joy. Looks like it doesn't like any of my three Android devices... Well done, Bennor: good detective skills... Desktop site works for Firefox, too. Can't find a global setting for the option in either browser, though.

Similar Messages

Cannot Read From Registry - Need to save and load config

I have code the I have tested in other programs. I cannot read or write to the registry from a plugin. Any ideas?
Any suggestions for the best way to save and load config information?
Thanks!!!

Hi Srikanth,
Thank you for responding.
I had a problem on one material. So deleted the request and Reload it from PSA. That issue got solved.
And Now the problem is , Now my senior is saying Delete the data from April-09 till date and Reload it. The issue is My CUBE ( ZSD_C03 ) is updated with 4 data sources. 2LIS_11_V_ITM   , 2LIS_13_VDITM   , 2LIS_12_VCHDR , 2LIS_11_VAITM .
And I need to delete data from 2LIS_13_VDITM data source . How Can I proceed for the current issue   ?
Please suggest   ...
Thank you ,
Utpal

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

Generic file I/O error. Cannot save VI "filename.VI"

Hi, I have LV 8.2. I am having problems saving VI's after editing them. I am getting the message:
Generic file I/O error. Cannot save VI "filename.VI"
I can recreate the problem by creating a blank VI, placing a property node on the block diagram, right clicking on property and choosing, select property and in the window that pops up expanding Application and clicking on Directory path and clicking OK. I save this VI to disk. Then I load the file again and delete the property node. Now if I try to save that I get: Generic file I/O error. Cannot save VI "filename.VI"
Furthermore with the real VI that I am having problems with. If, when I get the cannot save message, I do a "Save as" and save a copy as "filename backup" and then quit labview without saving the "filename" vi, when I run LabVIEW again I get:
The last time you ran LabVIEW, an internal rror or crash occured at save.cpp, line 821.
I click investigate internal error message now and get told there is a logfile of the error. The contents of the file on one occasion were, quote:
#Date: Thu, 9 Nov 2006 10:56:40 a.m.
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.2
#AppKind: FDS
#AppModDate: 07/27/2006 00:08 GMT
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 43 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x008CCBB6 - LabVIEW <unknown> + 0
0x008D17CE - LabVIEW <unknown> + 0
0x0100F864 - LabVIEW <unknown> + 0
0x00528E26 - LabVIEW <unknown> + 0
0x00529342 - LabVIEW <unknown> + 0
0x0052960C - LabVIEW <unknown> + 0
0x004D6D2F - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004D7CD8 - LabVIEW <unknown> + 0
0x004DBA95 - LabVIEW <unknown> + 0
0x004DBD50 - LabVIEW <unknown> + 0
0x0051FD4C - LabVIEW <unknown> + 0
0x0051FD6F - LabVIEW <unknown> + 0
0x0122CA73 - LabVIEW <unknown> + 0
0x77E735DD - kernel32 <unknown> + 0
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics 9 nov BU1.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 45 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x00D0FE4B - LabVIEW <unknown> + 0
0x008C8E17 - LabVIEW <unknown> + 0
0x008D1726 - LabVIEW <unknown> + 0
0x008D212C - LabVIEW <unknown> + 0
0x00C41E5E - LabVIEW <unknown> + 0
0x00C46F31 - LabVIEW <unknown> + 0
0x00C4796D - LabVIEW <unknown> + 0
0x00C497C6 - LabVIEW <unknown> + 0
0x004CCB39 - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004DF19A - LabVIEW <unknown> + 0
0x77D48654 - USER32 <unknown> + 0
0x77D48723 - USER32 <unknown> + 0
0x77D48999 - USER32 <unknown> + 0
0x77D48FD2 - USER32 <unknown> + 0
End of Quote:
Any ideas?

Hello,
Sorry you've encountered this problem. The cpp error is a known issue, which is filed under corrective action request number : 42BI4OO5. In a nutshell, this means R&D is looking into the problem. I attempted to reproduce the problem as you described below, but I did not get the "Generic file I/O error" as you did.
If you have any further insight or detail which perhaps is the key to reproducing this, please repost, and I'll try to reproduce this again! In the mean time, does it help to copy and paste your code to a new VI, or does that VI suffer the same problem?
Thank you,
Best Regards,
JLS
PS -
Standard CAR Response:
"This was reported to R&D (42BI4OO5 CAR ID) for further investigation. Thanks for the feedback!"
Best,
JLS
Sixclear

My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
Exactly how were you trying to save a copy of your iPhoto library?
Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
We need to know exactly what you did
And probalby the easiest solution is to load your backup from before you messed things up
For reference after you get things working
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Cannot Save Export Presets PPro CC2014 (also in AME CC2014)

I cannot save any export presets in Premiere CC 2014 (PPro CC 2014) or import any presets. Also applies to Adobe Media Encoder CC 2014 (AME CC 2014).
When I go File > Export > Media (or ⌘E) and set my format and output specs, I cannot save the preset. The preset says "custom" and then I hit the "save preset" icon. Type a name in the "Choose Name" dialog box, then click OK. The "Choose Name" dialog box disappears, but nothing happens. The preset line still says "custom" and there is no preset file available to choose. The preset is not saved. Export works, but the settings must be manually entered each and every time.
I also cannot import any presets. Have .EPR files with presets that I've used in the past and NONE of them will import using the "import preset" icon.
The presets will also not import into AME CC 2014 via any method at all - icons, dragging/dropping, copying to various directories... cannot load them. I cannot add them to the user presets & groups at all, no matter what method I have tried. It's frustrating and becoming infuriating. I can create a "New Group" in the user presets and groups, but nothing can be added to the group. Clicking the + for "create new preset" does nothing - no window opens or appears. Clicking "import presets" opens the "import preset" dialog box and I can choose files and click open, but they do not import or appear anywhere withing AME CC 2014.
3.33 6-Core "Mid-2012" running OSX 10.9.4 with GTX 680 (official version) and 32GB RAM
Also see this discussion:
AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."

This was not directly a permissions issue. Had checked that numerous times previously and applied settings to all enclosed items on every folder that was related. This workaround was attempted several times previously, but had not worked. Now, it's working.
Re: AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."
I will say, what I did differently this time was trying to edit the Adobe Media Encoder CC 2014.app via Show Package Contents before attempting to do any of this. Not sure if that's why it suddenly worked or not, but worth mentioning.

ClassLoader in JAR file not loading config file properly

Hi all,
I have an application that I am going to deploy using JavaWS, and everything works fine except for one little hitch. I have a configuration file, nvacconfig, located at NVAC.jar/config/nvacconfig. I'm trying to load this file into my application using a ClassLoader, but it does not seem to be working.
I have a method from a certain class that loads the configuration file. The class is not important, as it is part of an API that I cannot alter. This class has a load(String file) method, that loads the specified configuration file with a String argument. This works fine when I run my application from the command line and when the configuration file is not located in the JAR, but I need to include this configuration file in my JAR, so I can run my app in the JWS sandbox.
To load the file when it is NOT inside a JAR, and is simply located at config/nvacconfig, I just use:
id.properties.load("config/nvacconfig");and it loads the configuration file, nvacconfig.
When I include the file in my JAR and try to load it using a ClassLoader, it does not seem to work, and the load method cannot find the file. This is how I am trying to accomplish this:
ClassLoader cl = this.getClass().getClassLoader();
URL url = cl.getResource("config/nvacconfig");
String file = url.toString(); //I have also tried String file = url.getFile();
id.properties.load(file);This does not work, and I'm not sure why.
Is there something I am doing wrong? Is this the wrong way to go about this?
Any advice would be greatly appreciated.
Thanks,
Dan
Message was edited by:
Djaunl

try this:
import java.io.*;
import java.util.jar.*;
import java.util.zip.*;
public class ExtractFromJAR {
     public void extractFileFromJAR(String dest, String fileName) {
          try {
               String home = getClass().getProtectionDomain().getCodeSource().getLocation().getPath().replaceAll("%20",
               JarFile jar = new JarFile(home);
               ZipEntry entry = jar.getEntry(fileName);
               File efile = new File(dest, entry.getName());
               InputStream in = new BufferedInputStream(jar.getInputStream(entry));
               OutputStream out = new BufferedOutputStream(new FileOutputStream(efile));
               byte[] buffer = new byte[2048];
               for (;;) {
                    int nBytes = in.read(buffer);
                    if (nBytes <= 0)
                         break;
                    out.write(buffer, 0, nBytes);
               out.flush();
               out.close();
               in.close();
          } catch (Exception e) {
               e.printStackTrace();
     public static void main(String args[]) {
          new ExtractFromJAR().extractFileFromJAR(".", "file.txt");
}

Cannot save opened tabs before closing the browser

Cannot save opened tabs before closing the browser. I do not know if there is such a feature (should be), and how to activate it.
It was very useful with previous version.

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Why firefox cannot save print file in win64 bit?

In this windows ,I cannot save any print file.(like Adobe PDF,XPC Document Writer,...) my computer goes to hang.(unknown problem) before I can type file name to save my computer.
But I can print web page to my printer.
So I reset print config in about:config.(in my 2 PC) but no difference.
But in 32 bit version windows, is working.I checked in windows virtual PC, I can save print file.
Could you check and resolve this problem?

It's probably a JavaScript problem, since those pop-up windows are controlled by JavaScript code. That's not uncommon with Safari. It's likely the JavaScript coding is suspect; Safari seems to be especially sensitive to that.

[Solved] error: C compiler cannot create executables; see 'config.log'

Trying to build avant-window-navigator from the aur using yaourt results in this error message. I recently upgraded my system and suspect this may be the cause, but I'm not sure how to proceed from here. My config.log follows.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by avant-window-navigator configure 0.4.1, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ ./configure --prefix=/usr --sysconfdir=/usr/share --disable-static --disable-pymod-checks
## Platform. ##
hostname = vectorman
uname -m = x86_64
uname -r = 3.2.7-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Tue Feb 21 09:51:29 CET 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2498: checking for a BSD-compatible install
configure:2566: result: /bin/install -c
configure:2577: checking whether build environment is sane
configure:2627: result: yes
configure:2768: checking for a thread-safe mkdir -p
configure:2807: result: /bin/mkdir -p
configure:2820: checking for gawk
configure:2836: found /usr/bin/gawk
configure:2847: result: gawk
configure:2858: checking whether make sets $(MAKE)
configure:2880: result: yes
configure:2961: checking whether to enable maintainer-specific portions of Makefiles
configure:2970: result: no
configure:2999: checking for style of include used by make
configure:3027: result: GNU
configure:3098: checking for gcc
configure:3114: found /usr/bin/gcc
configure:3125: result: gcc
configure:3354: checking for C compiler version
configure:3363: gcc --version >&5
gcc (GCC) 4.6.2 20111223 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3374: $? = 0
configure:3363: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20111223/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --enable-multilib --disable-libssp --disable-libstdcxx-pch --enable-checking=release --with-fpmath=sse
Thread model: posix
gcc version 4.6.2 20111223 (prerelease) (GCC)
configure:3374: $? = 0
configure:3363: gcc -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3374: $? = 1
configure:3363: gcc -qversion >&5
gcc: error: unrecognized option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3374: $? = 1
configure:3394: checking whether the C compiler works
configure:3416: gcc -march=x86-64 -mtune=generic -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/cc1: error while loading shared libraries: libcloog-isl.so.2: cannot open shared object file: No such file or directory
configure:3420: $? = 1
configure:3458: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "avant-window-navigator"
| #define PACKAGE_TARNAME "avant-window-navigator"
| #define PACKAGE_VERSION "0.4.1"
| #define PACKAGE_STRING "avant-window-navigator 0.4.1"
| #define PACKAGE_BUGREPORT "https://bugs.launchpad.net/awn"
| #define PACKAGE_URL ""
| #define EXTRA_VERSION ""
| #define PACKAGE "avant-window-navigator"
| #define VERSION "0.4.1"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3463: error: in `/tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build':
configure:3465: error: C compiler cannot create executables
See `config.log' for more details
## Cache variables. ##
ac_cv_env_AWN_CFLAGS_set=
ac_cv_env_AWN_CFLAGS_value=
ac_cv_env_AWN_LIBS_set=
ac_cv_env_AWN_LIBS_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOCK_CFLAGS_set=
ac_cv_env_DOCK_CFLAGS_value=
ac_cv_env_DOCK_LIBS_set=
ac_cv_env_DOCK_LIBS_value=
ac_cv_env_GTKDOC_DEPS_CFLAGS_set=
ac_cv_env_GTKDOC_DEPS_CFLAGS_value=
ac_cv_env_GTKDOC_DEPS_LIBS_set=
ac_cv_env_GTKDOC_DEPS_LIBS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl,--hash-style=gnu -Wl,--as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_PYGTK_CFLAGS_set=
ac_cv_env_PYGTK_CFLAGS_value=
ac_cv_env_PYGTK_LIBS_set=
ac_cv_env_PYGTK_LIBS_value=
ac_cv_env_PYTHON_set=set
ac_cv_env_PYTHON_value=/usr/bin/python2
ac_cv_env_TASKMANAGER_CFLAGS_set=
ac_cv_env_TASKMANAGER_CFLAGS_value=
ac_cv_env_TASKMANAGER_LIBS_set=
ac_cv_env_TASKMANAGER_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build/missing --run aclocal-1.11'
ACLOCAL_AMFLAGS='${ACLOCAL_FLAGS}'
ALL_LINGUAS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_DEFAULT_VERBOSITY=''
AM_MAKEFLAGS=''
APPLETSDIR=''
AR=''
AUTOCONF='${SHELL} /tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build/missing --run autoconf'
AUTOHEADER='${SHELL} /tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build/missing --run autoheader'
AUTOMAKE='${SHELL} /tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build/missing --run automake-1.11'
AWK='gawk'
AWN_CFLAGS=''
AWN_LIBS=''
CATALOGS=''
CATOBJEXT=''
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe'
CPP=''
CPPFLAGS=''
CXX=''
CYGPATH_W='echo'
DATADIR=''
DATADIRNAME=''
DBUS_GLIB_BIN=''
DEFS=''
DEPDIR='.deps'
DISABLE_DEPRECATED_FLAGS=''
DLLTOOL=''
DOCK_CFLAGS=''
DOCK_LIBS=''
DOLT_BASH=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_GTK_DOC_FALSE=''
ENABLE_GTK_DOC_TRUE=''
EXEEXT=''
EXTRA_VERSION=''
F77=''
FC=''
FGREP=''
GCONFTOOL=''
GCONF_SCHEMAS_INSTALL_FALSE=''
GCONF_SCHEMAS_INSTALL_TRUE=''
GCONF_SCHEMA_CONFIG_SOURCE=''
GCONF_SCHEMA_FILE_DIR=''
GETTEXT_PACKAGE=''
GLIB_GENMARSHAL=''
GMOFILES=''
GMSGFMT=''
GREP=''
GTKDOC_CHECK=''
GTKDOC_DEPS_CFLAGS=''
GTKDOC_DEPS_LIBS=''
GTKDOC_MKPDF=''
GTKDOC_REBASE=''
GTK_DOC_BUILD_HTML_FALSE=''
GTK_DOC_BUILD_HTML_TRUE=''
GTK_DOC_BUILD_PDF_FALSE=''
GTK_DOC_BUILD_PDF_TRUE=''
GTK_DOC_USE_LIBTOOL_FALSE=''
GTK_DOC_USE_LIBTOOL_TRUE=''
GTK_DOC_USE_REBASE_FALSE=''
GTK_DOC_USE_REBASE_TRUE=''
HTML_DIR=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INSTOBJEXT=''
INTLLIBS=''
INTLTOOL_CAVES_RULE=''
INTLTOOL_DESKTOP_RULE=''
INTLTOOL_DIRECTORY_RULE=''
INTLTOOL_EXTRACT=''
INTLTOOL_KBD_RULE=''
INTLTOOL_KEYS_RULE=''
INTLTOOL_MERGE=''
INTLTOOL_OAF_RULE=''
INTLTOOL_PERL=''
INTLTOOL_POLICY_RULE=''
INTLTOOL_PONG_RULE=''
INTLTOOL_PROP_RULE=''
INTLTOOL_SCHEMAS_RULE=''
INTLTOOL_SCHEMA_INI_RULE=''
INTLTOOL_SERVER_RULE=''
INTLTOOL_SERVICE_RULE=''
INTLTOOL_SHEET_RULE=''
INTLTOOL_SOUNDLIST_RULE=''
INTLTOOL_THEME_RULE=''
INTLTOOL_UI_RULE=''
INTLTOOL_UPDATE=''
INTLTOOL_V_MERGE=''
INTLTOOL_V_MERGE_OPTIONS=''
INTLTOOL_XAM_RULE=''
INTLTOOL_XML_NOMERGE_RULE=''
INTLTOOL_XML_RULE=''
INTLTOOL__v_MERGE_0=''
INTLTOOL__v_MERGE_=''
LD=''
LDA_BINDIR=''
LDA_DEFSDIR=''
LDA_VAPIDIR=''
LDFLAGS='-Wl,--hash-style=gnu -Wl,--as-needed'
LIBAPPLETDIR=''
LIBDIR=''
LIBOBJS=''
LIBRARY_MODULES=''
LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LOCALEDIR=''
LTCOMPILE=''
LTCXXCOMPILE=''
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEFLAGS=''
MAKEINFO='${SHELL} /tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build/missing --run makeinfo'
MANIFEST_TOOL=''
MKDIR_P='/bin/mkdir -p'
MKINSTALLDIRS=''
MSGFMT=''
MSGFMT_OPTS=''
MSGMERGE=''
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='avant-window-navigator'
PACKAGE_BUGREPORT='https://bugs.launchpad.net/awn'
PACKAGE_NAME='avant-window-navigator'
PACKAGE_STRING='avant-window-navigator 0.4.1'
PACKAGE_TARNAME='avant-window-navigator'
PACKAGE_URL=''
PACKAGE_VERSION='0.4.1'
PATH_SEPARATOR=':'
PKGDATADIR=''
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
POFILES=''
POSUB=''
PO_IN_DATADIR_FALSE=''
PO_IN_DATADIR_TRUE=''
PYGTK_CFLAGS=''
PYGTK_DEFSDIR=''
PYGTK_LIBS=''
PYG_CODEGEN=''
PYTHON='/usr/bin/python2'
PYTHON_CPPFLAGS=''
PYTHON_EXEC_PREFIX=''
PYTHON_EXTRA_LDFLAGS=''
PYTHON_EXTRA_LIBS=''
PYTHON_LDFLAGS=''
PYTHON_PLATFORM=''
PYTHON_PREFIX=''
PYTHON_VERSION=''
Q=''
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STANDARD_CPPFLAGS=''
STRIP=''
TASKMANAGER_CFLAGS=''
TASKMANAGER_LIBS=''
USE_NLS=''
V=''
VALAC='/opt/vala-0.12/bin/valac'
VALA_GEN_INTROSPECT=''
VAPIGEN=''
VERSION='0.4.1'
WARNING_FLAGS=''
XGETTEXT=''
ac_ct_AR=''
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /tmp/yaourt-tmp-terry/aur-avant-window-navigator-bzr/src/awn-build/install-sh'
intltool__v_merge_options_0=''
intltool__v_merge_options_=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localedir_intermediate=''
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgpyexecdir=''
pkgpythondir=''
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
pyexecdir=''
pythondir=''
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
shavedir=''
sysconfdir='/usr/share'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "avant-window-navigator"
#define PACKAGE_TARNAME "avant-window-navigator"
#define PACKAGE_VERSION "0.4.1"
#define PACKAGE_STRING "avant-window-navigator 0.4.1"
#define PACKAGE_BUGREPORT "https://bugs.launchpad.net/awn"
#define PACKAGE_URL ""
#define EXTRA_VERSION ""
#define PACKAGE "avant-window-navigator"
#define VERSION "0.4.1"
configure: exit 77
Last edited by vectorman (2012-02-26 14:47:18)

/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/cc1: error while loading shared libraries: libcloog-isl.so.2: cannot open shared object file: No such file or directory
cloog provides libcloog-isl.so cloog /usr/lib/libcloog-isl.so.3 and cloog /usr/lib/libcloog-isl.so.3.0.0 but not libcloog-isl.so.2.
Edit: https://bbs.archlinux.org/viewtopic.php … 35#p983435
If your system is fully updated, maybe you're using some custom packages, like glibc https://bbs.archlinux.org/viewtopic.php … 51#p845851
Last edited by karol (2012-02-26 14:01:30)

Cannot save PPro CS4 project created on another PC

Another editor told me to delete the pref files but I'm double checking first.
I brought across several projects created with CS3 and CS4 on another PC. All open and eventually load after I find all the media (the projects are > 250 gig. The one I need (always the way, ain't it) will open but not even any of the auto-saved versions will Save. I left it overnight and nada. I click cancel and PPro crashes. What is the solution?
SuperMicro server Motherboard
2 quad xeons
16 gig RAM
Windows 7 Ultimate 64
AVID RTR 320x /UL4D SCSI RAID for media
Quadro FX 3800 video card
All suggestions are welcomed with gratitude.
Peter B

Out of desperation I resurrected a machine that can mount the Matrox RTX2 and will try to open the wretched project with the machine it originated on. When the project tries to load on the Super Micro server box it warns all sorts of what appear to be Matrox plugins and effects are missing so maybe that is the key. I've never seen that little red dot with the X on it before nor the yellow caution sign that precedes it while the media is loading. From now on all projects on the SuperMicro unit will start their lives as AJA format so we can use the $6,000 Braodcast HD monitor I bought in 2008 but haven't actually used for HD other than checking footage from the PDW700 via HD/SDI.
Hope I can open the project because I suspect there will be serious consequences if I do not.
cheers,
Peter Burn
Date: Sat, 24 Apr 2010 19:24:41 -0600
From: [email protected]
To: [email protected]
Subject: Cannot save PPro CS4 project created on another PC
I can only give you the location for PrPro 2.0 on XP-Pro. Sure that there are some changes, but maybe this will get you started: C:\Documents & Settings\[Username]\Application Data\Adobe\Premiere Pro\2.0 and the file is "Adobe Premiere Pro Prefs" w/o an extension. If one "trashes the Prefs," then the Adobe program will just rebuild them with the defaults. There is also a keystroke combo, to use when launching the program. Unfortunately, almost all Adobe programs are different. I think that PrPro is hold down Shift, launch program (while holding down Shift), until it launches fully. For PS it is ShiftCtrlAlt and one gets a dialog screen, asking if one wishes to delete the Preferences - IIRC, PrPro does not have such a dialog.
For the manual trashing of the Prefs, just rename the Prefs file (should be named in a very similar fashion in CS4 and Win7), to say Old-prefs, for backup. Launch CS4, and the Prefs will be re-written.
Good luck,
Hunt
>

Cannot save an edit

When I pick a photo in Photoshop elements 5.0 to edit it will not let me save the edits. The error message is "Could not complete your request because of a program error"
I have already did a repair installation to the program but that did not work.

I hope that I'm not jumping over someone's head, but I was having the same problem until I realize I had loaded a file/picture from the SD card and, when attempting to save, was trying to save BACK to that card. The computer cannot save a pic file BACKto the SD card. You have to designate another file folder on the hard drive, or some where else to save the modified file. I've been beating my head for 2 days over this, reloaded the program, repaired, etc, etc,. THEN I happened to look down and noticed the SD card sticking out of the front of the computer. DUH! Changed folder and it's working fine!
Clint

4500157269 -Document is incomplete: You cannot save the delivery

Hi all,
When I try to create an outbound delivery for an STO using t-code VL10B, i get an error saying the following:
Error Log for coll. run 0000740903.
            4500157269 000000 Document is incomplete: You cannot save the delivery.
           LongText               Detail                 Diagnosis
                    When the system checked whether saving delivery was
                    permitted, it determined that the requirements stored in
                    Define Incompletion Procedures for this document do not
                    allow this subsequent function.
Please advise how to overcome this problem.
Thanks
Kaveri

Hello Kaveri,
It seems to me that the "incompletion procedures" for replenishment delivery have not been fulfilled to create the delivery.
Can you please check what is the incompletion procedure assigned to your replenishment delivery and what fields in that procedure are mandatory to be filled before the delivery document gets generated.
If these fields are not filled, then the delivery creation fails. Please check the details in the config (LE>Shipping>Basic Shipping functions>incomplete control for deliveries>Assing incompleteness procedure and then define incompletion procedure for the field information at the header and item level).
If this seems to be lengthy, please check with your SD guy who can quickly check it for you about the incompletion procedure requirements.

Bind to AD error message "cannot save password"

After loading Lion, I can not join/bind to my Windows Active Directory. I acts like it is binding and then I get the error message "cannot save password" It never binds. It does create the computer account in AD though.

Is this a Toshiba thing or an Microsoft Question?
It's a Microsoft question. Take it here.
Microsoft Discussion Groups
-Jerry

Cannot save or load config

Similar Messages

Maybe you are looking for