Cannot Save pictures that come from a Samsung phone on iPad/iPod/iPhone

I've tried this across several devices and have found a conflict only with this specific set of devices. If I try to send a picture from certain Samsung phonse to an iOS device (be it iPad, iPod, or iPhone) via email or MMS I am able to view but not save the image. I've posted a problem image on the web so that others can observe this issue.
Using safari navigate to http://twitpic.com/3humzm/full . The image displays fine.
Press-and-hold the image to open the menu and then save the image.
Go to the photo application and attempt to view the photograph. It won't allow you to view the photograph.
What I don't understand is the image displayed just fine within Safari, within e-mail, and within the messaging application. The problem only occurs if one decides to save the image. The other confusing thing is this only happens if the image came from certain Samsung phones.
I can't pin the problem on Samsung or Apple. My Apple devices have no problems with images from other devices, and other devices have no problems with images from the Samsung. Does any one have a clue what is happening here?

Update: I got a friend to try it on an iPhone with 3.1.3 and the problem does not occur for her. I don't have iPhones laying around with all the other possible firmware versions, but I am starting to think this is specific to the 4.2 firmware.

Similar Messages

  • I am not being able to send pictures via Bluetooth from my Samsung phone to my iPad mini and vice versa. So is there a setting or is it a compatibility issue ? Please help

    I am not being able to send pictures via Bluetooth from my Samsung phone to my iPad mini and vice versa. So is there a setting or is it a compatibility issue ? Please help

    You can also use a wireless flash drive.
    http://www.sandisk.com/products/wireless/flash-drive/

  • AirDrop works fine, but the name that comes up on both my mini ipad and iPhone 5 is Selena Gomez. Why? Idk... I checked my phone name in settings and it comes up as MY name. What's going on?

    AirDrop works fine, but the name that comes up on both my mini ipad and iPhone 5 is Selena Gomez. Why? Idk... I checked my phone name in settings and it comes up as MY name. What's going on?

    Well, then the only answer is that you are Selena Gomez

  • HT1688 I cannot send pictures or videos from my I phone 3gs.  I use to be able to by not any longer.

    I am unable to send video and pictures from my I phone.   I was able to but now I cannot.   Can someone please help.

    I'm not sure exactly what you mean, but I'll give a few examples of what I think you might be looking for.
    I am running iOS 5 on my iPad and Pages '08 on my iMac.
    1. I created a Pages file on my iPad and emailed it to me by selecting the wrench --> share and print -->email document -->chose Pages as the format.  I collected the file from my email and attempted to open it in Pages '08. The message I received was that I needed a newer version of Pages.  True enough, but I'm sure that iWork '12 will come out this summer so I'll hold off on that purchase. What I did to solve this problem was to send the file in Word format instead. When I opened it with Pages '08, I had to tweak the format a bit, but it worked. Perhaps your trouble is that you need to upgrade. You could also send the file in PDF format.
    2. I created a file in Pages '08 and sent it as an attatchment by email to my iPad. I collected the file from my email on the iPad, then clicked on the attatchment.  It opened in Pages for iPad with no problem. If this is the senario you are having trouble with, then I suggest you first send a test file, and if that doesn't work, make sure all your files are backed up then delete the app and reinstall it.  WARNING!!! when you delete the app, all files will be deleted as well.  Make sure you have current and accurate backups that you can access before taking this step.  Files saved in iTunes may not be accessable other than to the iPad.  Make sure you can open the files on your computer BEFORE taking this action.

  • Calendar on iOS 7.1: Cannot Save Event - That event does not belong to that event store.

    Hi All,
    I have an iPhone 5 running iOS 7.1.
    Yesterday, while updating a birthday in the iPhone iOS calendar app (default calendar = GMail), I noticed that the new 'List View' in the iOS 7.1 calendar (and only that view) showed an event called 'New Event' - which has a start date of 2014 and an end date of 2001. If I go into that event, it will show me no title and no location - only, as mentioned, funny start and end times. The 'Delete Event' button is completely missing. This 'New Event' does not come up in any other view.
    Trying to input a ficticious title with a valid start and end time into that event slot leads to a message from the calendar app saying: "Cannot Save Event - That event does not belong to that event store." I have deleted all calendars and re-add them again via settings, with / without soft and hard reset and tried every possible combination. Yet, the event will not disappear.
    The funny thing is that this 'New Event' will still showed up, even when my GMail, work and iCloud calendars were disabled. I have, however, subscribed to a GMail calendar for Australian holidays, and there is a built-in 'Birthday' calendar that pulls the dates from the contacts (I do not use that contact field, though).
    Does anyone have a similar issue? Any suggestions how to fix it?
    Thanks in advance!
    Edit: This 'New Event' does not seem to sync to any calendar other than on the iPhone - not to Gmail, not to work, not to iCloud.

    Had same problem. Although the phone looks off   it actually isnt.  If you actually turn it off and then on again this problem will disappear. I think its a memory overload issue that is solved by clearing the memory by turning it off.
    Worked for me

  • After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only. "

    After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  How can I go back to attached images?

    Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  Double clicking on the box will open the image in a separate window.  It's very slow and tedious for multiple images.  How can I go back to attached and displayed  images?  If I click on "Forward", the images appear instantly in the email to be forwarded.

    Scott,
    My problem seemed to fix itself.  Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something.  Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it.  A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to.  Well, I shut it down one night so the following morning, I could write down each step.  Lo and behold, the images, etc. are all there again!  Solved, but I'm not sure why.
    Tom

  • Problem in saving data in spreadshee​t that comes from DAQ

    Hi
    I am new for using the Labview. I have problem saving the data in spreadsheet. mine just save the last reading that come from DAQ. And can not figure it out .
    If  there is way to make it save all the data with the time when I start run it till I stop it,please
    Thanks in advince
    Attachments:
    2 temp recording spreadsheet Ver_ 3.vi ‏141 KB

    I've changed the architecture to something that is way better then the sequence structure you had (State Machine).  Just to give you an idea on how it could be done.
    Still the dynamic data type is in there (which I don't like), but I'm not going to change your method.
    I've cleaned up your code a bit.  It's still not perfect, but it's done in 2mins. 
    I do have one question though : why are you saving an entire column (the last) of data which contains the same value (namely the total time the test ran)???
    Kind regards,
    - Bjorn -
    Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
    LabVIEW 5.1 - LabVIEW 2012
    Attachments:
    2 temp recording spreadsheet Ver_ 4SM.vi ‏100 KB

  • How to delete pictures that downloaded from laptop?

    How do I delete pictures that downloaded from laptop?
    Thanks :-)

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-apphttp://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-onlyhttp://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.htmlhttp://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    iPhoto for iOS (iPad): Delete photos from iPhoto
    http://support.apple.com/kb/ph3137http://support.apple.com/kb/ph3137
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipadhttp://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
    Delete Pictures from Your iPad
    http://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.htmlhttp://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.html
     Cheers, Tom

  • When I bought my iPad and set up iCloud and started using iMessage the picture that comes up when I send a picture is not me but my stepdaughter. How do I change it? The ID picture on my iMac is me

    When I bought my iPad and set up iCloud I started using iMessage but when I type a note and hit send the picture that comes up is not me but some one else that I know. I don,t even have this picture in my iPhoto's so don't know where it came from. My ID picture on my MacBook pro is correct. I went to settings, then messages but did not see a place to change the picture. Any ideas?

    You set the picture in Contacts.
    Open Contacts, select the person then tap Edit.
    Tap the photo to change it.

  • Cannot find picture when transferring from Aperture to PSE 11

    Cannot find picture when transferring from Aperture to PSE 11
    I have an older version of PSE and when I transferred a picture from Aperture to PSE9 it would open PSE9 and show the picture.
    I set the Preps in Aperture for PSE 11 and the PSE 11 opens but no picture in the box or photo bin or in the top left "open".
    I changed the Aperture setting to the PSE Organizer and the same thing happened Organizer open BUT there was no picture to be found.
    In Aperture it shows the file being transferred.
    I looked in the PSE 11 preps and file but could not find anything.
    The fact that it opens the PSE 11 app tells me it is being recognized but the picture (file) is going somewhere else.
    Thanks
    Greg

    Hi Greg
      Make sure you are linking to the application in Support Files and not to an alias.

  • I have an iPhone 4 that i was trying to fix and now it will not turn on at all is there anyway that i can access all my pictures and contacts from my new phone or pc? It is also on the same apple id, but i dont know if that would help with anything.

    I have an iPhone 4 thats i was trying to fix and now it will not turn on at all is there anyway that i can access my pictures and contacts from my new phone or pc? Aslo the are both on the same apple id but i dont know if that would help or not.

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

    i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • [svn:fx-trunk] 9171: Adding the change notes that come from the TLF folks

    Revision: 9171
    Author:   [email protected]
    Date:     2009-08-07 08:57:35 -0700 (Fri, 07 Aug 2009)
    Log Message:
    Adding the change notes that come from the TLF folks
    bug: nope
    qa: nope
    checkintests: no need
    Added Paths:
        flex/sdk/trunk/frameworks/projects/textLayout/ReleaseNotes.txt

Maybe you are looking for

  • Portal display issue in Portal 7.3 version

    Hi Experts, We are using portal 7.3 vesion,one of the user getting portal disply issue,it is not appearing proper ess portal screen. we checked with other user,they will not getting the same issue,it is only one use faceing this issue. please let me

  • View Application in Web Browser

    I am using LV8 as my programming environment and want to publish my built application (or at least one or two vi's that make up the application) so that other users can view it via their web browser.  Right now I'm testing my application on the same

  • Dreamweaver Rollover Issue

    Hi, I usually don't have problems with rollovers since I use Dreamweaver to make them but for some reason this one is stubborn and won't work?? The print page one? http://www.southbeachgroup.com/maps.html Anyone know what's wrong? Thanks, Allie

  • Unexpected character change in html message.

    Hi, In Outlook 2013, when i press a link with mailto option set, the new mail window opens with preset contents and recepients. The problem is, the closed square brackets in the body of the mail becomes opened brackets. when I change the format of th

  • Hiding Icons On The Desktop

    I would like to know if it's possible to hid the icons on the desktop (temporarily) so they don't distract me during my "interfacing"....