Cannot save profile changes

I login using my microsoft account. I cannot edit my skype profile. When it asks for confirmation password, it says I entered the wrong password. I did not. My microsoft account works fine.
Skype does seem to point to a deleted hotmail account from ages ago not my microsoft account. The hotmail account no longer exists and cannot be recovered.

I am replying since I'm new to Skype and the forum and I don't see an option for posting. This is an old thread, but with no solution given that I can find. Please let me know the solution by posting, because my e-mail address is wrong (see below).
Simply said: I have the same problem, including Skype having an e-mail address for me that doesn't work. Since Skype won't let me change my Profile (rejects the same MS Outlook password I signed in with), I can't fix the e-mail or add phone numbers to my Profile.
I'm here because I contacted Support and they've never answered. Perhaps I can't add a new comment because no confirmation message for a new user could be sent to me, because Skype WON'T LET ME CHANGE MY PROFILE!

Similar Messages

Cannot save contact changes in outlook, always reverts back to what it was before.

Cannot save contact changes in outlook, always reverts back to what it was
before.

Hi
As per the information and details provided by you, to save the all contacts in Outlook, please follow these steps: -
By default, when you double-click on a contact in Outlook, the new
Contact Card displays for that contact. The Contact Card does not contain all the fields from the full contact editing window that opens when you create a new contact.
The
Contact Card also displays by default when you search for a contact. You can still open the full contact editing window when editing a contact or when searching for a contact. To switch to your
Contact folder, click the People link at the bottom of the
Outlook window or press Ctrl+3.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

I cannot save any changes without renaming

Acrobat X Pro - Windows 7 - no matter how slight as change (e.g., rotate a page, insert or delete a page) I cannot save the document without being forced to rename it thereby necessitating deleting the old one and always having to creat new names - terribly irritating and this did not used to happen.

From what I have seen it may be necessary to re-install Adobe to see if that fixes the problem. However, I would first check the processes in "msconfig" in Windows to ensure you do not have an issue with multiple instances of Adobe running at the same time. There may also be another Adobe program running in the background that could be causing this issue. I have researched online and could not find a specific fix to this issue except from what I found about re-installing Adobe and seeing if that fixes the problem. I would also first try to close all programs and processes that are not needed and see if that works, if it does then one of the programs is interfering with Adobe to handle the processes you are trying to complete. As everything else seems to be working OK I tend to lean towards an update or another program that has been installed conflicting with Adobe. I will continue to look into this issue as I have not seen it before or maybe someone else will also have some insight on how this can be corrected.

Cannot save a changed form

This happened to my most complicated form in Access 2007.
When I try to edit the form in design view, if i make any changes and then try to close the form the dialogue asking if I want to save the changes appears. The only way to close the form is to click No. If I click yes or cancel the form stays
open. Also, I cannot rename the form in the Navigation pane. The option is there, but the change is ignored. Also, I cannot use the ofiice button save as to get a copy of the form. This problem only occurs on this one form. Solution
of last resort: recreate from scratch.

"machina7" wrote in message
news:[email protected]...
> Dirk thanks.
>
> Name AutoCorrect is not turned on and it throws up errors when I try to do
> it (in backup copies of course).
>
> I've tried importing all the elements to a new DB and some things move
> over but a lot of forms and reports cause the errors listed above
>
> i.e. "search key not found", "name conflicts" and "no current record" or
> some changing variation of those three.
>
> Also tried decompiles and SaveAsText.
Drat! I was going to suggest decompiling next.
> Very frustrating and an absolutely critical database...
If you can import the *data* from the corrupted database, and you have a
backup that contains uncorrupted forms and reports, maybe you can reassemble
a working database by combining the two. Unfortunately, if you've done a
lot of development on the forms and reports since you made that backup,
you'll have a lot to redo.
If that isn't a workable solution, I'm out of suggestions for things you can
do yourself. Seeing as it's a critical database, I'd suggest you contact
one of the professional database repair companies. I know of two with good
reputations:
PKSolutions:
http://pksolutions.com/t4.htm
Everything Access:
http://www.everythingaccess.com/accessdatabaserepair.htm
Neither of those will charge you anything if they can't repair your
database. I'm sure there are other companies that do similar work, but
these are the ones with which I am familiar.
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html

I cannot save any changes made in the Preferences box. I go to Edit, then Preferences. When the window opens, I can check or uncheck boxes in the General window BUT, there are no Cancel or OK buttons at the bottom of the window. HELP!!

There are no "Cancel" or "OK" buttons at the botton of my "Preferences" box that allow me save any changes that I might mak in the "General" window. The box opens without problem and changes can be made in the "General" window however, these changes cannot be saved. If I close the window with the "X" in the upper right hand corner and then reopen it, any changes made are lost. I'm running Windows XP and would appreciate any help that I can get.

I would like to change the "When you insert a CD:" option
Oh good, that one's pretty straightforward. When you make that change in the pane, the OK is the active button. For example, I just quickly changed mine to "Import CD and Eject", and you can see that the OK button is blue in my screenshot:
... so to make that setting stick, all you need to do is to hit your "Enter" key, and that should press the OK.
Unfortunately, I don't have any music in the iTunes library on the PC I'm working from at the moment. So I can't check my "Automatically download album artwork" checkbox.
Ed, could you check for us which item is active after changing that setting? (If it's the OK button, then hitting enter should press the invisible button, just like "When you insert a CD".)
Changing "Import Settings" is trickier, because after you get out of the "Import Settings" subdialog, the "Import Settings" button is active. So you then have to hit the tab key precisely five times (to get OK active again) and then hit Enter to get Import Settings changes to stick.

Cannot save any changes - Microsoft Forefront 2010 for exchange is unable to perform the requested function

HI, I have Forefront 2010 for Exchange installed for an Exchange 2007 SP2 running on Windows 2003 x64 SP2. Exchange has all roles installed on the same server.
When I try to save any change on Forefront I got the following message:
Microsoft Forefront 2010 for Exchange is unable to perform the requested function. This may be because Forefront services are unavailable. Ensure that all Microsoft Forefront services are running and that WindowsPower Shell is functional
Well, our FF services are running and PowerShell is functional. I checked some forums and found some problems when there is entries in the IP Allow / Block lists in Exchange UI. I removed those entries but problem remains.
Any ideas would be appreciated.
Xavier Villafuerte

In my case, I was able to work around this issue by using PowerShell directly. For example, to run an on-demand scan for all mailboxes, this worked:
#open EMS
$aliases = (get-mailbox -result unlimited).alias
Add-PsSnapin FSSPSSnapin
set-FseOnDemandScan -MailboxList $aliases
Start-FseOnDemandScan -EnableVirusScan $true
Windows 2008 R2 SP1
Exchange 2010 SP3, RU9
PowerShell 4.0 present on the machine (though EMS runs PS 2.0)
Forefront PowerShell cmdlets:
https://technet.microsoft.com/en-us/library/cc482986.aspx
Mike Crowley | MVP
My Blog --
Baseline Technologies

Imovie 11 on macbook pro get error message cannot save project changes

imovie 11 on macbook pro get error message cannto save project changes:
Please check the disk to ensure there is enough free space and you have permission to write projects. iMovie will try to save periodically, but your changes will be lost if you quit iMovie before the problem is resolved. I have 462 GB disc space available. I don't know about "permission to write projects".

OK - bad luck about that. I hope you weren't too far advanced into your project. Sorry to hear that repairing permissions didn't help.
When working on a long project, it's advisable to duplicate the project from time to time. In Project Library view click on your project then select File>Duplicate Project from iMovie's menu. A number will be appended to the name of the duplicate, otherwise you can rename it. A short-cut is to control-click (or right-click) on the project name, then select Duplicate Project from the pop-up menu. Duplicating doesn't take up much extra space, as the project points to the clips in the Event (or Events) and doesn't contain actual video as such (it's basically a text file which also holds information about your edits, added photos, music, titles and so forth).
Also, it's best to have a backup, such as Time Machine. It gives you peace of mind when things go wrong!
John

Cannot save pitch change?

Running QT Pro 7.6.6 on OS X 10.6.4.
I have a .aiff file on which I would like to change the pitch. I can change the pitch in the A/V Controls, but I can't figure out a way to save that. Is this even possible? Thanks for any assistance.

Nope.
Changes made in the A/V Controls window can't be "saved" with the file.

Cannot save configuration changes on catalyst 3548

i have an old switch that worked when last on network. powered on normally, but when i attempt to make configuration changes (copy running config startup config), it fails. where can i find information on working with file systems Version 12.0(5.3)WC(1), MAINTENANCE INTERIM SOFTWARE

hi, thanks for the followup. i appreciate it. i am sure the is corruption in the config.text file but am having a problem deleting it. i have copied a number of errors, listed below.......
va-research-3548-06#copy runn start
Destination filename [startup-config]?
Building configuration...
intel_28f320j5_write_bytes: flash busy error
flashfs[1]: writing to flash handle 0x4E4E34, device 0, offset 0x360000, length
0x208: Operation Failed
flashfs[1]: sector ptr: {0x1B, 0xA0}
nv_done: unable to open "flash:config.text.new"[OK]
va-research-3548-06#
va-research-3548-06#dir
Directory of flash:/
%Error opening flash:/ (Device or resource busy)
3612672 bytes total (476160 bytes free)
va-research-3548-06#
va-research-3548-06#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Ve
INTERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:51 by devgoyal
Image text-base: 0x00003000, data-base: 0x003331F4
ROM: Bootstrap program is C3500XL boot loader
va-research-3548-06 uptime is 4 days, 16 hours, 36 minutes
System returned to ROM by reload
System image file is "flash:c3500XL-c3h2s-mz-120-5.3.WC.1.bin"
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes
of memory.
Processor board ID FAB0528V1LZ, with hardware revision 0x00
Last reset from warm-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:06:53:A9:14:40
Motherboard assembly number: 73-3903-08
Power supply part number: 34-0971-01
Motherboard serial number: FAB052572SW
Power supply serial number: PAC052300EI
Model revision number: A0
Motherboard revision number: C0
Model number: WS-C3548-XL-EN
System serial number: FAB0528V1LZ
Configuration register is 0xF
va-research-3548-06#
va-research-3548-06#dir flash:
Directory of flash:/
2 -rwx 1749748 Apr 30 2001 07:54:49 c3500XL-c3h2s-mz-120-5.3.WC.1.bin
3 -rwx 94375 Apr 30 2001 07:54:49 c3500XL-diag-mz-120-5.3.WC.1
4 drwx 10176 Feb 28 1993 16:00:55 html
5 -rwx 272 Dec 31 1969 16:00:20 env_vars
165 -rwx 4337 Feb 28 1993 18:06:35 config.text
166 -rwx 1096 Mar 01 1993 15:41:40 vlan.dat
3612672 bytes total (476160 bytes free)
va-research-3548-06#del
va-research-3548-06#delete flash:config.text
Delete filename [config.text]?
Delete flash:config.text? [confirm]
intel_28f320j5_write_bytes: flash busy error
flashfs[1]: writing to flash handle 0x4E4E34, device 0, offset 0x360000, length
0x208: Operation Failed
flashfs[1]: sector ptr: {0x1B, 0x9B}
flashfs[1]: filesystem marked down. Use "fsck" to recover.
%Error deleting flash:config.text (I/O error)
va-research-3548-06#

LR 1.3 cannot save changes to export preset - only create new presets

So, in LR 1.2, I could change some parameters in a preset (export presets) and then save the changed preset. But the upgraded LR 1.3 export form does not seem to have a "save" option. I can create a new preset, I can remove a preset, but I cannot save a change to an already existing preset. I can get around it by ...
. add, creating a new (ie. temporary) name saving my changes
. open the original preset
. remove (the old preset)
. open the new preset (with the temp name)
. add using the old preset name that I like to use
. open the temporary (ie. new) preset
. remove (to delete the temporary preset)
- yuck! What an ugly work around :(
Can we please have our save option back again?

It's still there. Right-click the preset you want to update and select that option.

Cannot save changes when enabling Publishing Server

I have Contribute 4 with Contribute Publishing Server 1.11.
I'm able to setup normal Contribute sites fine and was able to
setup one Publishing Server site. Now though, whenever I try to
enable Publishing Server on a site, it enables alright but when I
close the Site Administration window I get an error that says
"Contribute cannot save your changes to the website's shared
settings on the server".
I've tried checking permissions; everything seems 'liberal'
enough like Contribute likes it. I've reinstalled Publishing Server
(including deleting any _mm folders). I've attempted deleting and
re-adding sites more times than I can count. Nothing has seemed to
make a difference. Has anyone experienced this problem or have any
ideas what might be going on? Thanks very much!
Nathan Williams

Hello Nathan, I'm using Contribute 3.11 (without Publishing
Server) and I'm experiencing the same issue: "while trying to setup
the admin password".
It seems to me that this is a bug from Macromedia... and
hopefully they will respond to us.
Alan Q.

I cannot save data on a pdf on my tablet since most recent update

I use Adobe reader on my Galaxy Note 8 to do audits. I fill in with forms with stylus. Since the update I cannot save any data to forms. The "Save" button, previously in upper right hand corner of screen, is gone. There is only a check mark on the screen. I thought that was to save, but it doesn't work.

"Stylus mode" -- Are you referring to the "Freehand" annotation tool? It is available regardless of whether you use a stylus or not.
In the previous version, the Freehand annotation toolbar looked like this.
The Save button above is used to commit a particular annotation change. Please note that it does not save other changes (e.g. filling out form fields) that have been made to a PDF document.
In the latest version 11.4, it now looks like this.
Once you add a Freehand annotation to a PDF document, you can tap the checkmark icon to commit the change. Do you see the change that you've just made on a page?
Are any changes (not just addition of Freehand annotations) lost once you close the PDF document?
If none of the changes you've made have been saved automatically, it is highly likely that you encountered a known problem in Adobe Reader for Android.
Your PDF document is locally stored on an external SD card (not internal storage).
Your Android OS version is 4.4 (KitKat).
Adobe Reader cannot save any changes to the files on an external SD card due to the major Android OS changes to SD card permissions on KitKat. We are still working on fixing the problems. In the meantime, please copy the files from your external SD card to your device's internal storage (e.g. /storage/emulated/0/Documents/...) using a File Manager/Browser app or use a cloud storage service (Acrobat.com, Dropbox, Google Drive, etc.) to store files.
Please let us know if you need further assistance. Sorry for the inconvenience.

After migrating to a new mac; iphoto library cannot save

Hi,
I'm faced with the problem that since the migration to a new mac; iphoto 11 cannot save any changes to the library. I can import, I can add an album, but if I quit Iphoto and start again every change is gone.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My friends cannot see my profile changes

Since the last skype update when I change the information in my profile there is nowhere for me to save the changes and as a result my contacts cannot see the changes. I have moved countries so would like to be able to update all my contact info. Thanks

try rebooting
hold down the home and power buttons untill the apple appears

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

Cannot save profile changes

Similar Messages

Maybe you are looking for