Cannot save the text in pop up in variant

Hi all,
I am calling a pop up text editor using CATSXT_SIMPLE_TEXT_EDITOR. When i enter the text and try to save it as variant, the info on the pop up disappears. Any idea of how this message can be saved as variant?
Thanks.
Warm regards,
Harshad.

Hello Harshad,
There is no way to save the text entered in to a variant.
The only possibility is to download the text entered into a local file from pop up or upload the text from a local file into the popup.
There is no other way.
Since this kind of function module's main purpose is to load the text for a material and download it to local file.
Things like Delivery conditions, payment terms, or Help file will be loaded into this for display for user.
So that they could make a copy of it on local file.
Hope 'READ_TEXT' function modules and all could be used for this.
Thanks and Best Regards,
Suresh

Similar Messages

I have 14 address labels on a sheet. I want to amend an entry but I cannot save the new text onto the existing document. Any ideas?

I have 14 label addresses on a sheet. I cannot amend the text and save it to the original sheet. It just ignores the changes. Has anyone got any ideas how this can be done?

Be specific, stop beating around the bush.
Is it Microsoft Works or not?
If this is just address labels, why not just take the text and put it in a clean Pages template?
You don't have to convert specific files unless there is some incredibly intricate and worthwhile layout involved. Labels are mostly just text, with possibly some graphics in boxes, Not very complex at all.
Peter

"I received a PDF File via email,I can fill out the text box but I cannot save the file."

I sent a PDF file to someone via email, they were able to fill out the form but they cannot save the file to send back, I have checked the security properties and there were no restrictions. Do I need to save the PDF a specific way? I have sent it to others that have Acrobat Pro and are able to save but those without Acrobat are unable to save. Please advise!
Thank you!

Hi MSMistry1,
Users with Adobe Reader 8 and later will be able to save form data if you save the form as a Reader Extended PDF with Enable Additional Features selected. See http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7e0d.w .html
a 'C' student

I get this message "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again. I have this file from when I had CS4. It worked then. I trying to make

I get this message when I am trying to save a file that was done in CS4, now using CS6 "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again." Even if I start a new file I unable to save it with this font. I need to use this font.

Then you need to outline all text before savng the PDF.
Make sure you do this on a copy of the file.

How to save the text in module pool

am working with screen exit for QM01 tcode . I created one subscreen . created 2 text editors in that screen . now I want to save the text in that text editors. am using save_text , but its not working . can any one guide me regarding this with code. and tell me wht parameters I shd pass to that FM.
its very urgent.

Hi ,
Please check the format below since it is based on a working code
**************data declarations
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code
GW_THEAD-TDNAME   = loc_nam.   " unique key for the text
GW_THEAD-TDID     = 'ST'.                " Text ID
GW_THEAD-TDSPRAS = SY-LANGU.
GW_THEAD-TDOBJECT = 'ZXXX'.   "name of the text object created
*Read Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
    IMPORTING
      TABLE                  = int_table
    EXCEPTIONS
      ERROR_DP               = 1
      ERROR_CNTL_CALL_METHOD = 2
      ERROR_DP_CREATE        = 3
      POTENTIAL_DATA_LOSS    = 4
      others                 = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        HEADER   = GW_THEAD
      TABLES
        LINES    = InT_LINE
      EXCEPTIONS
        ID       = 1
        LANGUAGE = 2
        NAME     = 3
        OBJECT   = 4
        OTHERS   = 5.
    IF SY-SUBRC <> 0.
    ENDIF.
The code shown above is ok and working fine for save also,hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes and ultimately upload to YouTube. The volume reverts back to a default? low l

I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes, which is now version 11.1.1, and ultimately upload to YouTube. The volume reverts back to a default? low level. How can I retain the volume I assign in Garage Band, so that when the song moves to iTunes it doesn't revert?

I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes, which is now version 11.1.1, and ultimately upload to YouTube. The volume reverts back to a default? low level. How can I retain the volume I assign in Garage Band, so that when the song moves to iTunes it doesn't revert?

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

I created a form using acrobat XI pro. SOME users of the form cannot save the form. what can i do from my side to 'correct' the issue?

i created a form using acrobat XI pro. SOME users of the form cannot save the form. what can i do from my side to 'correct' the issue?

Do you know what PDF viewer those users were using? Do you have any more details about what happens when they attempt to save?

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

Even simpler than that.
Clicking once in a text box selects it.
Clicking once in a selected text box places the insertion point in the box.
The clicks do not need to be close enough in time to be read as a double click.
The same behaviour applies to table cells in Pages and in Numbers.
Regards,
Barry

I am trying to download iTunes, but cannot save the file because the thank you page comes up right away.

I am trying to download itunes 11.1.3.
I cannot save the file,ItunesSetup.exe.
I click on Save File and nothing happens, I use XP. The thank you page comes up right away

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Cannot display the text in Hyp Planning via ODI

Hi,
has anyone follow the tutorial from John Goodwin here:
"http://john-goodwin.blogspot.com/2008/10/odi-getting-text-data-into-planning.html" ??
I'd tried the tutorial in order to able to display text in Planning.
However, I still cannot display the text in the end, only the numeric id values - taken from the HSP_TEXT_CELL_VALUE table.
Here the steps I've done:
- getting the list of id and text values to be inserted into HSP_TEXT_CELL_VALUE table
- make a new interface to load data into planning
- I want to load data from flat file to Planning, so I dragged flat file and also the HSP_TEXT_CELL_VALUE table into the source column, and then join the "MP3" column from flat file with values column from HSP_TEXT_CELL_VALUE table (like written in the tutorial ""http://john-goodwin.blogspot.com/2008/10/odi-getting-text-data-into-planning.html")
- after that, I dragged the Account dimension, and then join them. For the MP3 column in target column, I mapped it with "id" column from HSP_TEXT_CELL_VALUE table.
- Then I execute. The data loaded into Planning, but when I tried to open in report, the MP3 column shows the "id" instead of "values".
Am I missing something?
Has anyone experienced the same as mine?
Any help would be appreciated.
Thanks

Hi,
I may have followed the blog :)
First have you loaded the values into the HSP_TEXT_CELL_VALUE table, have you checked the values are now in the table ?
Also, you will unfortunately have to restart the planning service after you have loaded them as the table is cached and a restart clears the cache.
When you load into planning you need to map the "Value" field in HSP_TEXT_CELL_VALUE to your data source, and load in the id to planning.
If you are only getting numerical values it is either because you have not restarted planning or the HSP_TEXT_CELL_VALUE has not been updated correctly.
Cheers
John
http://john-goodwin.blogspot.com/

Fetch unread RSS items from mail, set them to read, save the text to a file

This is what I want to do, and needless to say I am having a little trouble.
I wish to take the unread mail RSS items, set them to read, and then save the TEXT of the articles (not the title, time, or author) to a TextEdit file in my Documents folder.
So far I have Get Feeds From Mail > Filter Articles > Get Text from Articles > New Text File
This is all fine and dandy, but how do I just get the TEXT and not all of the crap that comes with it?
Thanks!

NOw I had manage to clear out the error, but now the problem is when I click on the 'save' button, this function clear out the entire text file for me !!!
The code are as below:
       if(e.getSource()== vButtons[0])
          try{
           String str;
           String Ky = tArea.getText();
           BufferedWriter buffWrite=null;
           BufferedWriter in1 = new BufferedWriter(new FileWriter("Keyword.txt"));
                    buffWrite.write(Ky);
                buffWrite.flush();
                    buffWrite.close();
                in1.close();
          catch (IOException ex) {
          ex.printStackTrace();
        if(e.getSource()== vButtons[1])
              new panel();
              dispose();
         if(e.getSource()== vButtons[2])
            System.exit(0);
    }     Please tell me how to save the TextArea to the text file, THANKS !!!

Error: Document is incomplete: You cannot save the delivery

During MB1B, mov type 343 in decentralized environment getting error "Document is incomplete: You cannot save the delivery"

Sharing screens from ERP Customization mov 343
In warehouse mov 343
Entries are maintained for mov 343

How to resolve this error - "Cannot save the illustration The requested transformation would make.."

Hello Adobe Community,
I am trying to organize some album artwork within a pre-designed template and I keep getting this error when trying to save the file in the eps file format:
Cannot save the illustration The requested transformation would make some objects fall completely off the drawing area.
All the art is within the bleed lines. The only transformation I did was rotating one of the pieces 180 degrees. I'm not exactly sure what it is referring to when illustrator says objects are going to completely fall off the drawing area.
Your insights would be appreciated.
Thank you!
Chris

Did you use Guides at all? From the View menu, choose Guides>Clear Guides. Then zoom way out and do a Select All and see if there any stray points near the borders of the artboard. Direct select them and delete. Then try your transformation.

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

Cannot save the text in pop up in variant

Similar Messages

Maybe you are looking for