Cannot save VPN settings on playbook

Hello, I'm running OS 2.0.1.358. I can set all VPN settings but when I hit save or save and connect they both go dim and it never saves. I've tried rebooting and setting up VPN multiple times, for some reason I cannot save any VPN profiles. Has anyone seen this before? I've checked around and cannot find anything. Thanks,

Upgraded to beta OS and then it worked like a charm... Don't know why???

Similar Messages

  • WRT54G cannot save DHCP settings

    Hi,
    My WRT54G will not save changes to the number of DHCP users. I have a static IP address from my ISP and have all of the info entered correctly and can connect wirelessly to the internet from my laptop but not from my wired desktop. I'm guessing it has something to do with the DHCP settings.
    On the router setup page it has the starting IP address as 192.168.1.1 (which is the IP address of the router and shouldn't be the pool's starting address) and the max number of users as 2. If I change the starting IP address to 192.168.1.2 it automatically sets the max number of users to 1. If I try to enter in any other values than those above for the starting IP address, it does not save the changes even though I get that page that says 'settings have been changed successfully' and the 'continue' button.
    I am running Vista on the laptop, XP Home on the desktop and have an SDSL modem from my ISP. I just switched from a Belkin router to the Linksys & both pc's could connect before with the Belkin except it kept dropping the wireless connection on the laptop -- hence the reason for the switch to the Linksys.
    I hope this makes sense to someone out there who can offer some assistance. I certainly do appreciate any help offered.

    You need to reset the router to factory defaults, then setup your router again from scratch.   If you saved a router configuration file, DO NOT use it.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • [WRT310N] Single Port Forwarding - Cannot save settings

    Alright, I updated the firmware on my WRT310N (actually after contacting support asking if No-IP.com was added to the DDNS settings, and I was told that the new update would include it, which it didn't) to v1.0.07-LS-HND and now I cannot save any settings in the Single Port Forwarding settings.  I've tested with both Firefox 3.0.7 and IE7.
    Everytime I select "Save Settings," I get:
    Error: F.from0 is undefined Source File: http://192.168.0.1/SingleForward.asp Line: 137 
    This is really annoying.  Luckily everything I have set I don't need to change...I just want to add.
     This is the function code:
    function chk_port_range(F)
        var i;
        var from, to, pro, ip;
        for(i=0; i<15; i++) {
            if ( eval( "F.enable"+i+".checked" ) == true ) {
                from = eval( "F.from"+i+".value" );
                to = eval( "F.to"+i+".value" );
                pro = eval( "F.pro"+i+".value" );
                ip = eval( "F.ip"+i+".value" );
                if ( chk_range_helper(from, to, pro, ip) == false ) {
                    alert ( errmsg.err74 );
                    eval( "F.enable"+i ).checked = false;
                    return false;
        return true;

    I have exactly the same problem
    Does Linksys/Cisco have plans on fixing this issue?
    cabozone, thank you for the workaround, but its true that the slots are not enough, crap !

  • Cannot save Adobe PDF Settings File error

    I'm using Acrobat X Pro with Windows 8. I've downloaded a .joboptions file to add to Distiller. I select Settings > Add Adobe PDF settings, browse to the file's location, select the file, and click Open.
    Distiller says, "Cannot save Adobe PDF Settings File."
    In the Start menu, I right-clicked Adobe Acrobat X Pro and selected Properties > Compatibility > Run this program as Administrator. It didn't help. Suggestions welcome.

    I downloaded it from the linked website, and installed it successfully in Distiller 10. I don't know of a "Repair" utility for Distiller, so maybe you should uninstall and install Acrobat X in order to reinstall Distiller 10.

  • Cannot figure how to disable youtube from ipod4g. Have disabled Safari but installed Google app with safesearch on. I want my daughter to be able to search wed, just not youtube. Tried to restrict YT, but It would not save restriction settings.

    Cannot figure how to disable youtube from ipod4g. Have disabled Safari but installed Google app with safesearch on. I want my daughter to be able to search wed, just not youtube. Tried to restrict YT, but It would not save restriction settings.

    Try to get the Google app to work
    iOS: Troubleshooting applications purchased from the App Store
    Contact Google
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod
    Try using anothere "safe" browser.
    Parental Control???: Apple Support Communities]
    How to Setup Parental Controls on iPhone & iPod Touch | Mobicip Blogs, Discussions & Help
    how do i put parental control on my...: Apple Support Communities
    parental control: Apple Support Communities

  • Cannot save Port Forwarding Settings

    I have a Wireless-N Home Router WRT150N (firmware upgraded to v1.01.9 ).
    When I try to set Port forwarding, I get the screen "Settings are successful. Continue". When I click Continue, the Port forwarding page comes back with empty fields, like if I did not enter anything. I tried to reset the Router twice. No result.
    The same thing happens for Port Range and Single Port forwarding... Impossible to save any settings in there...
    Any suggestion welcome...

    Correction: caching was not the problem.
    The problem was that before posting on this forum, I did not enter a existing IP for destination (left the default 192.168.1.0. What got me confused is that the Linksys interface comes up with a message saying that the settings have been successfully updated, even though nothing was done for lack of an existing destination IP, hence the virgin table served back.
    I think Linksys should revise the GUY to alert the user when the destination IP is not properly set rather than pretending to have registered a new non functional setting.
    Message Edited by lou_boumian on 01-12-2008 10:15 PM

  • Cannot Save File because of disk error

    I selected 4 RAW images in Lightroom and chose the Merge to Panorama In Photoshop. After the file was created and I cropped it to my desired dimensions I tried to perform a simple save. I was asked what name to give the file and I went with the default settings and clicked OK on the Maximize Compatibility dialogue but I get an error that said "Cannot Save XXXXXX.PSD because of a Disk Error.
    There are no details and not other options to find details. The drive these images came from have permissions set to Read and Write so I don't know what the issue is.

    Your OS has reported a disk error - which usually means that there is a serious problem with the disk.
    Photoshop is just passing along the error it got from the OS.

  • Calendar on iOS 7.1: Cannot Save Event - That event does not belong to that event store.

    Hi All,
    I have an iPhone 5 running iOS 7.1.
    Yesterday, while updating a birthday in the iPhone iOS calendar app (default calendar = GMail), I noticed that the new 'List View' in the iOS 7.1 calendar (and only that view) showed an event called 'New Event' - which has a start date of 2014 and an end date of 2001. If I go into that event, it will show me no title and no location - only, as mentioned, funny start and end times. The 'Delete Event' button is completely missing. This 'New Event' does not come up in any other view.
    Trying to input a ficticious title with a valid start and end time into that event slot leads to a message from the calendar app saying: "Cannot Save Event - That event does not belong to that event store." I have deleted all calendars and re-add them again via settings, with / without soft and hard reset and tried every possible combination. Yet, the event will not disappear.
    The funny thing is that this 'New Event' will still showed up, even when my GMail, work and iCloud calendars were disabled. I have, however, subscribed to a GMail calendar for Australian holidays, and there is a built-in 'Birthday' calendar that pulls the dates from the contacts (I do not use that contact field, though).
    Does anyone have a similar issue? Any suggestions how to fix it?
    Thanks in advance!
    Edit: This 'New Event' does not seem to sync to any calendar other than on the iPhone - not to Gmail, not to work, not to iCloud.

    Had same problem. Although the phone looks off   it actually isnt.  If you actually turn it off and then on again this problem will disappear. I think its a memory overload issue that is solved by clearing the memory by turning it off.
    Worked for me

  • I cannot save my work in Illustrator CC2014.1 due to an 'unknown error'. Any ideas on a solution?

    Hi there,
    I have produced some work in illustrator and wanting to save before I proceed but Illustrator will not allow me due to an unknown error. I have tried some ideas posted on the web (turning off the visibility of layers, saving as an EPS) but to no avail. I have tried resetting my preferences and turning off sync settings but again no luck. Is anyone else experiencing this and anyone have any ideas on a solution?
    Many thanks,
    Matt

    Hi Jacob,
    Thanks for the idea.
    Tried that, (tried all the Save As options) and the same 'unknown error' occurs. I have tried saving as an Illustrator EPS and a different alert comes up as 'Cannot Save. A necessary item is missing: ID: 192'. No idea what the necessary item is? Mithril? Gold?
    Raghuveer- yes, it still is an issue- joined the connect session and waiting for your response.
    Many thanks,
    Matt

  • Cannot save a bookmark to NEW folder - FF wants me to rename EXISTING parent folder

    I cannot save a bookmark to a new folder. This is the path I am taking from the main menu:
    Bookmarks | Bookmark This Page
    Click the drop-down arrow to the right of Folder
    Select Choose
    Scroll to the parent folder in which I would like a new subfolder
    Click New Folder
    Then, instead of creating a new folder as it always did in the past, it highlights the parent folder for editing. If I type in a new folder name, the parent folder is changed to that new name. A new subfolder is created with the name New Folder.
    Things I have already tried that did *not* resolve the problem:
    - Deleting and then restoring bookmarks from a saved bookmark backup file.
    - Running the Add-On "Places Maintenance"
    - Rebuild "Places" database
    I have not yet reset Firefox or created a new profile but can try that if you gurus think that would help.
    I am using FF 32.0.2 on Win XP SP3.
    I have hundreds and hundreds of bookmarks, but from what I have read, there is no max size limit.
    Thank you in advance!
    Carol

    Cor-el, thank you very for your reply.
    I started Firefox in Safe Mode. The problem still occurs in Safe Mode. My understand is if the problem persists in Safe Mode, it is *not* being caused by an extension, theme or hardware acceleration. Other possible causes could be plugins or changes made to Firefox preference settings, which are not disabled in Safe Mode.
    As you suggested, I did check Add-ons > Appearance. (I don't think I have ever had any Appearance other than the default theme.) It was and still is set at Default 32.0.2 By Mozilla. Since the bookmarks problem persists in Safe Mode, I think we can rule out this as the cause anyway.
    All of my Plug-Ins are up-to-date except iTunes Application Detector 1.0.1.1. Status is "unknown". I have all Plug-Ins set to "Ask to Activate" or "Never Activate". None of them are set to "Always Activate".
    My cache, cookies and history have been cleared. I have rebooted my computer.
    Per your instructions, I did *not* reset Firefox. Should I reset Firefox or reinstall Firefox?
    The bookmarks problem still occurs.
    Thank you so much!
    Carol

  • Cannot Save Export Presets PPro CC2014 (also in AME CC2014)

    I cannot save any export presets in Premiere CC 2014 (PPro CC 2014) or import any presets.  Also applies to Adobe Media Encoder CC 2014 (AME CC 2014).
    When I go File > Export > Media (or ⌘E) and set my format and output specs, I cannot save the preset.  The preset says "custom" and then I hit the "save preset" icon.  Type a name in the "Choose Name" dialog box, then click OK.  The "Choose Name" dialog box disappears, but nothing happens.  The preset line still says "custom" and there is no preset file available to choose.  The preset is not saved.  Export works, but the settings must be manually entered each and every time.
    I also cannot import any presets.  Have .EPR files with presets that I've used in the past and NONE of them will import using the "import preset" icon. 
    The presets will also not import into AME CC 2014 via any method at all - icons, dragging/dropping, copying to various directories... cannot load them.  I cannot add them to the user presets & groups at all, no matter what method I have tried.  It's frustrating and becoming infuriating.  I can create a "New Group" in the user presets and groups, but nothing can be added to the group.  Clicking the + for "create new preset" does nothing - no window opens or appears.  Clicking "import presets" opens the "import preset" dialog box and I can choose files and click open, but they do not import or appear anywhere withing AME CC 2014.
    3.33 6-Core "Mid-2012" running OSX 10.9.4 with GTX 680 (official version) and 32GB RAM
    Also see this discussion:
    AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."

    This was not directly a permissions issue.  Had checked that numerous times previously and applied settings to all enclosed items on every folder that was related.  This workaround was attempted several times previously, but had not worked.  Now, it's working.
    Re: AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."
    I will say, what I did differently this time was trying to edit the Adobe Media Encoder CC 2014.app via Show Package Contents before attempting to do any of this.  Not sure if that's why it suddenly worked or not, but worth mentioning.

  • Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

    Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Cannot Save Document Leading to Serious Error in InDesign

    I'm using both InDesign CS3 and CS4 in Mac OS X 10.5.5
    We recently got a new printer at work (Xerox 700 Digital Color Press). Since then, I've had major issues saving some of my documents. Immediately after printing a document duplexed, It says this when I try to save: "Cannot save the document. It may be opened by other applications. Close applications and try again. You may also use saveas to save it into a new document." If I cancel and do a save as to another location, InDesign immediately crashes saying a serious error has been detected and must shut down. The same thing happens if I close the document without saving and try to open that same file again. I've tried this with files located on our server as well as my hard drive with the same results.
    Fortunately, restarting the computer resolves this problem (although only until I try printing it duplexed again). If I print it without duplexing, It will save just fine. No other applications I use are having this problem. As a temporary solution, I've been printing the job to the hold and then changing the settings on the printer to make the job duplex. I've tried uninstalling and reinstalling the entire creative suite as well as deleting the preferences and other settings, but none of those things have helped.

    I managed to find a workaround to this problem. Hopefully this'll be useful for anyone else with this problem until the problem is resolved by Adobe.
    After you close the document without saving, rename the file. When you open the file, it will open as a read-only document. Do a "Save As" to another location. You can then move the file you just saved to where it belongs. However, you won't be able to delete the previous file until you restart the computer.

  • Cannot save jpg files in outlook express

    Is there a problem sending a jpg file from Apple mail to outlook express? People I am sending to say they can see the photo, but cannot save the file.

    Do you have the "send Windows friendly files" checked? Other than that, there isn't much you can do that I know of; it is the recipient's ISP server/settings and their mail client settings that determine the remainder.

  • Watermark source file won't save in settings

    I have successfully created several watermark images that have source files (both in PDF format and JPG format). But there is one that I cannot get to save. I have tried the image in both JPG and PDF formats, but for whatever reason, when I try to save the settings, the source file is not saved and it just comes up as blank text when I select it for use. I have tried over and over again to save this watermark.
    As a result, whenever I want to apply this particular watermark, I have to go and browse for and find the file time and time again.
    ?? Any clue as to why this one won't save? Is there a maximum number of watermarks that can be saved?

    You can look at the place where the settings are saved.
    For Acrobat 8 and MS Vista the place is:
    X:\Users\{user}\AppData\Roaming\Adobe\Acrobat\8.0\Preferences\Watermark

Maybe you are looking for