Cannot scan w/HP C4280 since update of drivers from Apple

Happy 2012. Hope you can solve my problem
After installing the HP drivers which Apple suggests we use, my HP c4280 will not scan.
I get a long error message which, I cannot copy & paste into this question.
Briefly it says:
"HP scan cannot be opened because of a problem.
Check w/developer to make sure HP scan works with this version of Mac OS X along with instructions to re-install. Which, of course, I have done.
There is a window filled with a long log labled "Problem Details & system Configuration"
It says: "Dyld Error Message: Library not loaded:/Library/Printers/hp/Frameworks/HPWorkflowsmanager. framework/Versions/A/HPWorksflowsmanager
Referenced from: /Applications/Hewlett-Packard/HP Scan.app/Contents/MacOS/HP Scan
Reason: no suitable image found. Did find:
/usr/local/lib/HPWorkflowsManager: stat() failed with errno=13
Used AppCleaner to remove HP & then installed again, repaired permissions, restarted, again,
still no luck, even though I can print & copy!
If I try to Scan by using Scan button on the c4280, I get a message on the c4280 that the USB is not connected, even though I can print & copy.
Ran software update which does not indicate that I need any print drivers.
For all downloads I always go to the Apple site.
Thank you, for kindly taking time to help me with this issue.

I had a similar problem. I originally had an iMac running Leopard and an HP C4280 all-in-one printer with the HP software loaded. All was fine until I installed Mavericks in 2013 at which time I was unable to save scans using the HP Scan software. I used an "Image Capture" work-around for about a year. Sometime after I installed Yosemite in the fall of 2014, that problem with "HP Scan" disappeared. Then a month ago, I bought a Mac Pro and migrated everything from my iMac to my new Mac Pro. Then found I couldn't scan. I would get a message very similar to the one displayed at the top of this discussion. After a lot of messing around I found that Apple's "Migration Assistant.app" had failed to migrate (copy) over everything in the following directories:
/Library/Printers/hp
/Library/Image Capture/Support/Hewlett-Packard/
I still had my iMac, so I manually used rsync to copy over everything in those directories. Probably could have done it also from the GUI, just copying and pasting. Anyway, now HP Scan works and all is well.
I think Apple and HP have just decided not to support the HP Scan software anymore and to just go with the drivers and Apple's software. I don't know if it's just that I'm used to HP Scan or not, but I find it a lot easier and more convenient to use, especially with my Acrobat Pro.

Similar Messages

TS1398 Cannot access my wifi network since updating to OS7

I cannot access my wifi network since updating to OS7. Need wifi to make any changes - even to update for bug fix - help!!

Try power cycling your router. Un plug it, count to 20, plug it back in and let it reboot.
You can also try going into your iPad and 'reset all network settings'.

RESET Apple password to install updates and order from Apple Store

need to know HOW to reset my APPLE password so that I can UPDATE Flashplay to reset my APPLE password so that I can UPDATE Flashplayer, order from Apple Store and other things. Keeps asking me for "old password". I don't remember. Help?R

Not sure which password you mean. This is for the admin password for the computer. Then is instruction for your Apple ID and password.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac
Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Having issues updating Bootcamp drivers from 11.1 to 11.7

having issues updating Bootcamp drivers from 11.1 to 11.7
No matter what driver I have tried thus far
it does not install or update the drivers
Battlefield 3 nags you about having 11.1 and needing to update.
However this game proceeds to load using these drivers (11.1 )
I recently bought NFS THE RUN.
Unlike BF3 the game does not proceed therefore inorder to play this game i would need 11.7 or higher.
can someone please provide the driver that actualy installs and works.
My specs are MBP 15 inch
1 gig GPU ( AMD Radeon 6750m)
8 gigs on Ram
2.2 CPU i7

Take a look around my bookmarks
you are updating AMD, not Boot Camp drivers.
you need to uninstall first.
probably need to update via Device Manager not via Install from AMD
The 99% leaving out import 1% support to make Windows on Mac work 100% seamless

Can't download Pro Applications Update 2010-02 from Apple's webpage

I triedt to dowload the Pro Aplications Update 2010-02 from Apple's webpage http://support.apple.com/kb/DL949 but when I click on the download button I get re-directed to the webpage of FCX which I don't want to mess with. I want this download so that if I have to re-install FCS on my mac I can have the update with me. Does anyone know where I can download the update or even I will be able to get it from OS Xs software update. Thanks.

robt010101,
I did some research earlier tonight and found some links. They are for both FCS-2 and FCS-3 (FCP 7.x which is the last Studio before FCP-X). For the FCS-2 link you will be asked to enter your registration information, but on the FCS (3) I did not have to enter anything. I too got the same re-direct you did on the Pro Applications 2010-02. Curious, did you try the Software Update in the Apple menu as was suggested? I was able to download the following which I think were linked to FCS (3-lastest version before FCP-X). I was able to find:
Alpha Transitions
Plugin Manager
ProKitUpdate 5.1
ProKitUpdate 6.0.1
ProKitUpdate 7.0
ProRuntime
For FCS-2 I was able to find:
CinemaToolsUdate4.0.1
DVDStudioPro4.2.1Update
FinalCutPro6.0.6Update
Motion3.0.2Update
ProApplcationsUpdate2008-01
ProApplcationsUpdate2008-02
ProApplcationsUpdate2008-03
ProApplcationsUpdate2008-04
ProApplcationsUpdate2008-05
SoundtrackPro202Update
And before anyone gets his/her shorts in a twist, these were on Apple links. And they are:
http://support.apple.com/downloads/#Motion
http://support.apple.com/kb/DL737
http://support.apple.com/downloads/#pro%20applications
Hope this helps.
G-N

Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?

Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?

If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Cannot connect iphone to itunes since updating to 8.1

cannot connect to itunes since updating to 8.1

Hello allen219,
I understand that your iPhone 5 is not recognized by iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Cannot change signatures in mail since updated to yosemite

Since updated to yosemite I cannot change the signatures in Mail.

Go to Finder>Preferences>General>Show devices on desktop

Iphone4 cannot accept terms and conditions since update

Since update I can't agree to terms and conditions to purchase anything from ap store. Help, very frustrating

I got this from kztn 15: Check your cookie settings. Go to Settings: Safari: Block Cookies: and select 'never'. It worked for me plus when I restarted my phone I was able to get access to the iTunes store again.

IPhone 4s suddenly not seen by Win7, but is seen by iTunes? A friend who supports 30 iphones as an IT manager says it's a rampant issue since update. Official position Apple??

I'm completely up to date, I've restarted my pc and my phone several times. Is this intentional? Is apple trying to hide the device so it forces you to go through itunes and icloud?
Photostream has NEVER worked for me anyway and even if it did I want to see my device on my computer. My 16gb 4s has been 'backing up' for over an hour now. I can no longer access my phone photo folders through my computer, my phone does not even appear as a device anymore. It charges and itunes starts right up though. Prior to this last update it worked fine.
I don't want to be forced into using icloud or itunes to access my data. Is this yet another glitch or is it intentional?
I texted my IT friend hoping for a quick fix and he texts back "As you know I support 30 iphones, this week has been a nightmare, I feel your pain and don't have an answer."
I've seen a lot of similar posts when googling this issue but no one from apple support has addressed this, the only 'solutions' are 'reinstall icloud' or something like that. F*** icloud, which I deleted anyway. I want to access my phone through my computer as I was doing before.
All my drivers are up to date on my pc.

@ Peter: So this is apple supports way of saying 'we have no clue' or 'yes infact we are attempting to force you to use itunes as the sole way of transferring your data'?
Since you apparently can't figure out the issue by reading my first post I will lay it out very simply:
Ever since this last iTunes update (just this week) my Win 7 64 bit computer will not 'see' my 4s iPhone, but iTunes will. Prior to this I could go to 'My Computer' and see my phone, I could then open and copy any photos or videos out of it to my computer in 1/1000th of the time it took to sync with iTunes.
Now, suddenly I can't. Restarting my phone and my computer several times has not resolved this issue.
1) I'd like a solution if there is one
2) If there isn't one I'd like to know if this is something apple has done intentionally
3) If you're reading this and do not have a solution or an answer to this issue, please don't call me liar or complain that I'm ranting.

HT2305 Since updating my laptop from Windows Vista to Windows 7, my Ipod Shuffle, 3rd generation does not recognize last 3 playlist names; it calls them out as "playlist 3, playlist 4 -- even though in the panel the names are showing just fine. The music

I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.

From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
So you'll want to make sure VoiceOver is enabled to correct this.
B-rock

Cannot send Email with Mail since updated to 10.7.2, they stay in my Send Box...

Since I updated, I cannot send Email through Mail, it works with Thunderbird though.

Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app. I could get emails into the account with no problem but couldn't send. I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success. Then last night, it just so happened that my broadband provider had to change out my wireless modem. As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work. So I think people need to look at their router settings for the a solution to the problem.

Cannot receive email on phone since update

Since the new update, I cannot receive email on my phone. How do I get it to work again?

I am unable to make or receive calls since upgrading to Lollipop today. I have a Samsung Galaxy S5. Any ideas?
Not on AIRPLANE mode
Signal strength shows as full 4G
When connected to WIFI, still can't make phone calls
When I make a call it says "Welcome to Verizon....Your call cannot be completed as dialed."
P.S. I do have data, and i'm able to send\receive text, browse the internet and download apps from google play store, but I can't make calls.

Cannot open older Numbers files since update

Cannot open any Numbers files that were created before an update, but can create new files, close them, and reopen them. When I try to open the file it says "Numbers quit unexpectedly. Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple." I've sent reports to Apple several times, and have installed all updates that are available. I noticed this problem before I updated my other computer and can still open the files on that computer.

Hello
It seems that something works sadly because you aren't the first one with this problem which I already reported to Apple.
May yo pack one or two sample files as .zip archive
create a "System profile"
attch both of them to a mail and send it to:
koenig PERIOD yvan AT tele2 PERIOD fr
I would be able to look if I may revive your file or send it to Apple's bugs hunters.
Yvan KOENIG (from FRANCE lundi 10 mars 2008 09:46:32)

Cannot access pacman man page since update...

Okay, so I just updated pacman to 3.1.1-1, and I can't access pacman's man page. I checked and found that the page does exist on my system (I think, /usr/man/man5/pacman.conf.5.gz and /usr/man/man8/pacman.8.gz both exist). When I try execute 'man pacman' it just tells me "No manual entry for pacman". Oh, and I also tried manually specifying the section.
Any idea what's going on here?
Last edited by fflarex (2008-01-22 02:10:45)

Allan wrote:
zodmaner wrote:Anyway, since only x86_64 have this 'problem', should we file a bug report on this?
No, it a known problem with the transition of man pages to FHS compliant locations.
So that means the proper location of the man page is in /usr/share/man instate of /usr/man? Does this means that the man page for i686 version of pacman will eventually be moved to /usr/share/man too?
Last edited by zodmaner (2008-01-23 08:30:14)

Cannot scan w/HP C4280 since update of drivers from Apple

Similar Messages

Maybe you are looking for