Cannot schedule a series recording for a programme...

10pm Channel 4 Sunday Peep Show
The first in a new series but when I try to series record this message comes up. "Cannot schedule a series recording for a programme that's not a series"
Trying from episode 2 works fine but not episode one. This has happened with several programs recently. The first episode even has the option when you press the "i" button to Record Series but you can't series record from episode one.
I'm sure it was the same with Homeland and Hatfields & McCoys.
It's not a major issue but why does it happen?
Solved!
Go to Solution.

I did think that. However it still does it when there is more than one episode listed in the EPG. That's how i know there's a problem. It clearly shows a series listed but episode 1 doesn't allow series record but episode 2 does.
I've just deleted both the single recording for ep 1 and the series recording for ep 2 - so NO episodes are set to record and there is NO series recording set.
It still won't series record from ep 1 (even now ep2 appears in the EPG) but...
if ep1 is NOT set to record and I series record ep2 it also adds ep1 to the list of episodes to record.
So ep2 knows ep1 is part of the series BUT ep1 thinks its a stand alone episode......
As i say nothing major....

Similar Messages

Why no series recording for Crimewatch but there i...

I enjoy watching both of these programmes that are on once each month (only just noticed Crimewatch is on tonight nearly 15 minutes after it started), but I always seem to miss Crimewatch as there is no Series Recording or any reminder I seem to be able to set for it that renews itself the next month when it's on again.
Why does BT Vision do this?
Likewise, why is the Series Recording often available for one-off programmes?
Doesn't make any sense!
Can BT give me an explanation for this or can anyone else give me an answer please?
Thanks.

If I don't even know if it's on or when it's on then a Post-It note is of no use. The idea is that the box should be able to find the next episode to be broadcast and for it to appear in the 'Scheduled Recordings' section of the menu.
The problem with the BBC regarding Crimewatch is that they forever switch what day it's broadcast and which week of the month it's broadcast so I can't keep up with it but the box should be able to if it can manage to record other programmes if they switch days or times or if a programme gets cancelled then it will find when it is on next.

Cannot create the old records for notification

Hi All,
I am getting following error while creating notification for 1994 year. I have to create the a record for 1994 for history purpose.
ERROR DETAILS:
Malfunction start only allowed from date 02.10.1995
Message no. IM490
Diagnosis
You have entered a date which is earlier than the 02.10.1995.
System Response
The system cannot accept your entry, because it is unable to perform certain functions for it, as it does not have the necessary storage capacity.
Kindly reply.
Sundar

Hi,
The lower and upper date ranges are hardcoded. See in LIQS0I10:
LDATMIN = SY-DATLO - ( 365 * 15 ).
LDATMAX = SY-DATLO + ( 365 * 15 ).
-Paul
Please don't bump your threads, If someone can answer they will

Series recording for a sports team

I want to record all of the Oakland A's games. How do I set up a series recording? I don't see that option.

This is the exact same problem I having here in the Bay Area. I want to record the Giants Replay on Comcast Sports Net that comes on every night after a Giants game. But it won't allow me to set it up as a series recording. Sports is probably the biggest reason I have cable TV and this is just not set up properly. I know that Uverse handles this very easily! I am very happy with my Comcast service except for this part of it!

Scheduling a screen recording on your Mac

I often would like to view a webinar related to personal finance or my profession, but cannot as I am committed to attend a meeting or there is some time conflict. Is there a way to schedule Quicktime to start recording a screen recording of my Macintosh computer's screen much like one can schedule a DVR recording for one's t.v.? I have a desktop Mac that has Quicktime
at home. I have been thinking of getting an Apple laptop that I could just take to work so that I can turn on the screen recording and stop it when the webinars is through. But perhaps there is some software I am not aware that I could use in conjunction with Quicktime, or a feature of Quicktime I am not aware of? Thanks for any suggestions.

was searching for the same, here's what I've found:
http://macscripter.net/viewtopic.php?id=36232

Condition Record for a Header Condition?????

Friends,
The Client has a business requirement as follows:
1.They have over 100 transport vendors to cater to their
Shipping requirements across the country.
2.The freight charges are different for all transporters.
3. These charges are to be put at the HEADER level in the Sales Order.
6. They do not want to enter the freight charges manually (referring to a seperately maintained freight charges/transporter list).
6. They want the freight charges to be put at header level AUTOMATICALLY once the Transporter is chosen from the header partner function.
Is it possible to maintain a condition record for a condition which is defined as a 'Header Condition'.
To the best of my knowledge, we cannot maintain a condition record for a Header Condition.Header condition means all values are to be put manully.
Please advise.
Thanks.
Mohammed Raheel

Hi Mate,
Here you go. This is the best solution and it should work for you.
Create the fright condition type and uncheck the check boxes header condition and item condition. This action will let you enter an access sequence for the condition type. This fulfills the requirement for having the condition type to be automatic.
For this condition type to appear only at the header level and not at the item level, this is quite tricky. First thing that struck my mind is to check the "group condition" and point the "grp cond routine* to 1. This does not work because you have unchecked the Header Condition check box.
The other alternative to acheive the second requirement keeping the first requirement in place is to write a routine and assign it to the requirements column against the freight condition type in the pricing procedure. The routine will make sure that this condition is not picked up at the item level. If it is picked up you delete it programatically.
Please make sure you do not mark this condition as manual in the pricing procedure.
This should work.
Thanks
Ram

Can no longer schedule series recording with new l...

I am new to this forum, apologies in advance if I am not following any particular established protocol. Anyway, with the old BT vision, I used to have all the spanish league football programs on sky sports 1 and 2 scheduled for series recording. I can no longer do this with the new look BT vision. Why??

The new look BTVision use the Freeview dynamic EPG. If the series link info is missing this down to the broadcaster rather than to BT.
The dynamic EPG allows ( when properly used by the broadcaster) a recording to start and end on time even when the programme starts or finishes later than advertised.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Automatic Creation of Scheduled Master Record for Scheduled Master Data

Hi experts,
We know that MRU and Portion are Scheduled master data but Scheduled master record is transactional data. So it is obvious that we have to generate scheduled master record in every server wher we transport the master data manually. And we can generate records for a particular time span and after that time we have to generate the records again.
All I want to know that whether it is possible to get all the records generated automatically after certain period.
Thanks,
Arghya

Hi,
Scheduled records do NOT get created automatically , altleast not by any sort of configuration, in case you are looking for it.
Your can always create custom program to do so, but it isn't worth the effort.
You can create records for upto 7yrs ( do need to check but definitely for a period long enough)
Hope that helps!!!

Iphone 6 screen broken. local authorized service center cannot be reached despite arranging for "schedule a call" session. pls help

iphone 6 screen broken. local authorized service center cannot be reached despite arranging for "schedule a call" session. pls help

They do not know where your phone is yet because it has not had enough time to go through the process yet. I also started to worry when two weeks had passed and my iPhone 5S was still showing not received on the status website. That's when I joined this forum to see if anyone else was having the same problem. What I found out was that some people had been given reduced value for their trade in, but I also found posts from people like myself that were worried that their phone was lost and then came back and posted a week or two later that they had received their gift card.
I decided to chill and give it some time and about a week later my gift card arrived. If it had been for less than the promised amount I would no doubt still be upset and posting about it like the many posts I still see on here on a regular basis.
This is no doubt a popular program for Verizon. I would imagine there have been thousands of phones traded in. There are going to be at least some screw ups in the process. There is no point in getting ahead of yourself and assuming your case will be one of the screw ups unless it already is. Verizon has been consistently posting that it could take 4-6 weeks for processing. You will at some point likely hear the status on your traded-in phone. Patience would not hurt in this case.

AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC

I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
C:\Users\Administrator>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = R210_1_2K12
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\R210_1_2K12
      Starting test: Connectivity
         ......................... R210_1_2K12 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\R210_1_2K12
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... R210_1_2K12 passed test DNS
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : bcas-tbf
   Running enterprise tests on : bcas-tbf.local
      Starting test: DNS
         Test results for domain controllers:
            DC: R210_1_2K12.bcas-tbf.local
            Domain: bcas-tbf.local
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Records registration (RReg)
                  Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
                     Warning:
                     Missing AAAA record at DNS server 172.16.0.202:
                     R210_1_2K12.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server 172.16.0.202:
                     gc._msdcs.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server ::1:
                     R210_1_2K12.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server ::1:
                     gc._msdcs.bcas-tbf.local
               Warning: Record Registrations not found in some network adapters
               R210_1_2K12                  PASS WARN PASS PASS PASS WARN n/a
         ......................... bcas-tbf.local passed test DNS
IPCONFIG info:
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : R210_1_2K12
   Primary Dns Suffix . . . . . . . : bcas-tbf.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : bcas-tbf.local
Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
) #36 - Virtual Switch):
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
   Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
   IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 172.16.0.1
   DHCPv6 IAID . . . . . . . . . . . : 335554233
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
   DNS Servers . . . . . . . . . . . : ::1
                                       172.16.0.202
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
I'm unsure of what the problem is or what to do next. Thank You.

Disable IPv6 according to Pauls blog:
Disabling
IPv6 on Windows 2008
After disabling run:
ipconfig /flushdns
ipconfig /registerdns
restart the netlogon service or reboot.
For co-existence from IPv4 and IPv6 see:
Configuring DNS for IPv6/IPv4
Coexistence
IPv6
for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
IPv6 for the Windows Administrator: IPv6 Fundamentals
Hopefully, that fixes your issue. Added some links to read in cause you want to.
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

Scheduled Recordings not recording

Why are my scheduled recordings not recording. Sometimes the record light is on lilke it is but if I check my show is not listed. This goes for movies as well as series recordings.

You could try using other TV software, but that may not work either as it looks like your broadcaster is protecting some programmes to prevent recording, for copyright reasons.

Error "You cannot enter a partner function for output NEU"

Hi Experts,
I'm having these error "You cannot enter a partner function for output NEU" (message VN041) when I tried to assign a partner function (e.g OA) in the conditions records for application "EV" (Purchase outline agreement). The system do not allow me to do this for any doc type (LP, LPA, MK, OA, etc). I'm using t-code NACE or MN08.
I want to assign partner for key combination "Document Type". The conditions is already there but with no value, so I want to assign partner function "OA" or "VR".
I already check all the configuration and looks fine. For example, define possible partner functions for output type "NEU" for application "EV" (Purc outline agree).
Hope you can help me to find the problem.
Thanks,
Mairo.

I have the error in NACE or using tcode MN08.
As soon I executed those transaction the system shows the condition records created for varios Doc Type (e.g LP, LPA, MK, etc) but with no partner function assigned. For example:
Doc. Type / Name                     /             Funct /   Partner     /            Medium / Date/time /   Language
LP        /       Scheduling Agreement     / blank / blank /                                          2      /          3   /              EN
LPA      /      Scheduling Agreement                              / blank    / blank   /                1        /       3         /        EN
For example, I try to assign function "OA" for Doc. Type "LP", choose value from quickpick. Then when I press enter, the system give me the error "You cannot enter a partner function for output NEU", message no. VN041. Do not allow me to continue, so I have to leave this field blank, with no change.
Thanks,

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

Troubleshoot: How to process messages in "Recorded for Outbound processing"

Dear Experts,
I have File >XI(3.0)>IDoc scenario with 10-25 interfaces. Per interface an average of 200 msges.
Now we have an issue. from past 6 days all the messages for one of the interfaces are in status: "Recorded for Outbound processing"(with that single small black right arrow) in SXMB_MONI(around 1760 till now). Other than this few 100 messages for couple other interfaces are also in same status. There are other message interfaces using the same Idoc type; but they dont have this problem.
I have checked the queues: SMQ1/Q2. There are no errors. The other threads mention about some reports; but all are for error messages. So that also did not help!
On the first day someone had deleted the error queue entry. They had first checked the message in the queues but that was not showing any status. (This is very strange... but for some messages , the left most status column is not showing any status at all.. but while clicking on the end time column; I am getting the pop up which says succesfully processed). But this is not our problem right now.
Please help me process the messages in the "Recorded for Outbound processing" status.. some how!!!
Thanks in advance for your inputs....
P.N: Runtime workbench here is not configured properly. No CC monitoring tab; message monitoring shows only adapter messages etc.... So cannot check anything here

Thank you for your inputs.
@Udo.... SMQR- no issues.
The RFC destination is fine.
@Abhishek The Idoc has not reached SAP. The xml messages in XI are in "Recorded for outbound processing" which is kinda like Scheduled, i think. Anyway I checked the R/3 cant find the messages or errors.
Any help would be highly appreciated....

How can I add recording time to a single recording not a series recording?

If I set-up a series recording it allows me to add minutes to the recording time why can't I add time to a single recording? For example if I want to record a single show tomorrow I find it on the guide and hit record. Now I want to add a few minutes on the end of the show because I know it always runs over it's advertised time why can't I add the time? It doesn't gives to extra options for a single recording. The only time I can add time to a single recording is if the show is currently on then it allows me to add time but, not before the show is on. So what good does that do? Comcast allowed me to set-up extra options to a single recording.

Actually you can. It's a bit clumsy but what you have to do is go to the DVR menu, select scheduled reordings, select the recording you want to extend, scroll through the menu and you will find an option to modify the start / end time.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Cannot schedule a series recording for a programme...

Similar Messages

Maybe you are looking for