Cannot schedule SCJP 5.0

Hi All,
I really need some advice please help me.
I try to book SCJP 5.0 exam on Prometric, but when I try to submit it the form it says �Invalid Email address� under the part, �Sun Microsystems need further information�
And does not let me confirmed the booking.
What I couldn�t understand is why this error is coming up although I have registered and paid Sun Microsystems using the same email address. Also I received confirmation along with the voucher details from Sun to the same email address.
I wonder whether any of you encountered this problem when registering with prometric for Sun exams?
This is the second time I have paid for SCJP 5.0 and on the first occasion the rescheduling process didn�t work and my money was lost. I requested Sun Microsystems to looking in to it but I have never received any feed back as of today. Any help and advice is much appreciated on how I could proceed with this matter.
Sincerely
Dela

I got the same error. Instead of typing NONE for the SunID, type [email protected] and it should let you commit the registration. Being an ASP.Net developer sometimes helps :)
Edited by: architect0007 on Jun 30, 2008 4:29 PM

Similar Messages

  • Cannot Schedule report in WEBI

    I've built a report in Crystal XI Release 2 and brought it into WEBI, however, I cannot schedule the report to run (even immediately).  When I try to schdule the report, I get a request for Database Logon information for every query in the report, even if i fill in the information, it just asks again.  Any insights or help that anyone could provide would be much appreciated

    Hi Ben,
    1.When you  don't have the  crystal reports on your Enterprise and your connection for crystal reports is  failed.
    2.The schedule option for your crystal reports  is in Info view which is present in your Enterprise .
    3.If you have more queries  then you can contact the Administration team, they will  Navigate  you in the right way.
    4.As the Crystal enterprise is Linux and your local machine where your crystal designer is available is windows then you have to use the same connection which was created at the designer level.
    Else for  the best results  is to post the forum in the Enterprise Team as you have Login Problems with your  WEBI  server.
    Let us know if you have any queries.
    Regards,
    Naveen.

  • Cannot schedule log rotation from LMS32 GUI

    All,
    I've been experimenting with the log rotation feature from LMS 3.2 UI (CS > Server > Admin > LogRotation) and have noticed when I try to schedule the logrotation with any backup directory (/var/adm/CSCOpx/log for example) it indicates that I cannot schedule it for that directory structure.  I even tried /tmp which is wide open for writing from any account but it still errors out.
    I am familiar with the logrot.pl -c from the CLI but I need to try this first from the UI.   Has anyone run into this before or know if this is a product issue or a mis-configuration on my part?
    Regards,
    Michael

    Exactly what error are you getting when you try and schedule the rotation?  You should be able to use both /var/adm/CSCOpx/log and /tmp.

  • Cannot schedule a series recording for a programme...

    10pm Channel 4 Sunday Peep Show
    The first in a new series but when I try to series record this message comes up. "Cannot schedule a series recording for a programme that's not a series"
    Trying from episode 2 works fine but not episode one. This has happened with several programs recently. The first episode even has the option when you press the "i" button to Record Series but you can't series record from episode one.
    I'm sure it was the same with Homeland and Hatfields & McCoys.
    It's not a major issue but why does it happen?
    Solved!
    Go to Solution.

    I did think that. However it still does it when there is more than one episode listed in the EPG. That's how i know there's a problem. It clearly shows a series listed but episode 1 doesn't allow series record but episode 2 does.
    I've just deleted both the single recording for ep 1 and the series recording for ep 2 - so NO episodes are set to record and there is NO series recording set.
    It still won't series record from ep 1 (even now ep2 appears in the EPG) but...
    if ep1 is NOT set to record and I series record ep2 it also adds ep1 to the list of episodes to record.
    So ep2 knows ep1 is part of the series BUT ep1 thinks its a stand alone episode......
    As i say nothing major....

  • Cannot schedule the job at the time of AM when "multiple time a day"

    Dear all,
    I met this bug by the step below:
    1/ open the Data Services Management Console
    2/ select administrator.
    3/ select the batch repository and click the "batch job configuration"
    4/ select one job and select "add schedule".
    5/ I choose the "Multiple times a day"
    6/ and I select "AM" (default is PM)
    7/ click "apply"
    8/ I found that the time go back to "PM", which I have set into "AM".
    Cannot I set the time as "AM"? is it a bug ?or by design?
    Thanks.
    Jeff.

    what is the OS locale on which Management Console is running (tomcat) ? is it Japanese or Chinese
    there was a issue fixed in 11.7.3.9 and 12.2.0.0
    what is the version of DS you are using ?

  • I want to revoke rights so users cannot schedule periodic jobs

    We do encourage users to run reports in Background but we want to prevent them from scheduling periodic jobs.
    We want to have more controll over periodic jobs as we observed that users schedule them and then forget about them.
    Morover this has become our audit recommendation.
    As far as I can see there is no standard way to do it.
    Has anyone managed to achieve it?

    Hi..
           while searching for the answer i have seen following interesting point.chk whether this will help you..
    A job is eligible to start when both of the following are true:
    The start condition specified for the job is met.
    The job has been released to run.
    No job can be run until it has been released, even those scheduled to start immediately. To monitor and control what jobs are submitted to run in background processing, the system can be configured so an administrator can check jobs before releasing them to run.
    The release requirement can also be turned off on a per-user basis. Trusted users can be given a special authorization (authorization object S_BTCH_JOB (Batch Processing: Operations on Batch Jobs), value RELE) which will automatically and immediately release any job scheduled by that user.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/20/2d513897110872e10000009b38f889/content.htm
    thank you
    <b><removed_by_moderator></b>

  • "Terminal" problem: Cannot schedule wake up

    Hi, I'm not very good at using Terminal but thought I should type this in to have automatic wakeup:
    "pmset repeat wakeorpoweron MTWRF 07:45:00"
    Is there anything I need to do after entering this? I tried using this command so I could use it this morning and it didn't work. Any help would be appreciated, thanks.

    Good place to post: Mac OS X Technologies > Unix (Get under the hood with Command Line and the Terminal): http://discussions.apple.com/forum.jspa?forumID=735

  • Scheduling Error

    Hello,
    I am getting the following error when trying to schedule a report:
    oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1394)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    I can run a report immediately but cannot schedule it.
    Any help would be appreciated.
    Thanks!

    You've installed the scheduler schema in a database?

  • Report not working if scheduled in background as a job

    Dear friends please help me in this.
    We are having a z report. This report works fine in foreground and wont work
    ( means it will be in active state for more than 5 days but no result will come)
    when we schedule it in background as a job.
    In this report we are using bdc code also for uploading data. the same code is
    FORM bdc_transaction USING tcode.
      CALL FUNCTION 'BDC_INSERT'
        EXPORTING
          tcode     = tcode
        TABLES
          dynprotab = webdcdata.
      WRITE: /(25) 'BDC_INSERT'(i03),
                   tcode,
              (12) 'returncode:'(i05),
                   sy-subrc.
    ENDFORM.                    "BDC_TRANSACTION
    and i am populating the data in bdc
    PERFORM bdc_dynpro      USING 'SAPLMR1M'      '6000'.
          PERFORM bdc_field       USING 'BDC_OKCODE'    'ENTR'.
          PERFORM bdc_field       USING 'BDC_CURSOR'    'INVFO-BLDAT'.
    PERFORM bdc_dynpro      USING 'SAPLMR1M'    '6000'.
          PERFORM bdc_field       USING 'BDC_OKCODE'  '=BU'.
          PERFORM bdc_field       USING 'BDC_CURSOR'  'DRSEG-RBLGP(01)'.
          CALL TRANSACTION 'MIRO' USING webdcdata MODE p_mode UPDATE 'S'
                                        MESSAGES INTO itab_msg.
    etc.
    First i am populating data into an internal table and then displaying it in the output screen. Here i hava placed a menu items like select all , deselect all , upload etc . So that user can select as many records as he want and then can select the upload button
    so that the report will call bdc to upload the data.
    when i am directly executing the report it displays the data and then
    i will select the records that are diswplayed and
    then i press tghe button upload then the data will be uploaded into
    the screens. here i am not getting any problem everything is fine.
    when i am scheduling this job in Background it will be keep on
    running but no result will be displayed. Atleast output screen
    is also not displayed. Later on i came to know that we
    cannot schedule the reports which are using bdcs in background.
    So please tell me how far it is true. Please give me a clear explaniation for this .
    Thank you so much for all the replies.

    Try to record your transaction using trans. SHDB and select the check-box "Simulate background".
    Not all the dynpro runs same in background and in foreground. Always check the background simulation: when you record, and when you run bdc in foreground.
    Kanagaraja L

  • JOB Scheduling problem

    Hi All,
    My problem is the next:
    I would like to call two functions, in one function module, but I cannot schedule the second job after the first. I wrote the code, use the parameter PREDJOB_CHECKSTAT of JOB_CLOSE, but when the mother function called two jobs started immediately and paralell. What is worng in the following code?
    Thanks /and points :)/ for your help!
    Tamas
          L_JOBNAME = 'REQUEST_COPY'.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              JOBNAME  = L_JOBNAME
            IMPORTING
              JOBCOUNT = L_JOBCOUNT.
          SUBMIT RSSEM_REQUEST_COPY
                       WITH RNR = I_RNR
                       WITH S_CUBE = LS_CUBES-SOURCE_CUBE
                       WITH T_CUBE = LS_CUBES-TARGET_CUBE
                       USER SY-UNAME VIA JOB L_JOBNAME NUMBER L_JOBCOUNT
                       AND RETURN.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              JOBCOUNT  = L_JOBCOUNT
              JOBNAME   = L_JOBNAME
              STRTIMMED = 'X'.
          L_JOBNAME2 = 'REQUEST_CLOSE'.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              JOBNAME  = L_JOBNAME2
            IMPORTING
              JOBCOUNT = L_JOBCOUNT2.
         SUBMIT Z_REQUEST_CLOSE_ZSD_P25
                   USER SY-UNAME VIA JOB L_JOBNAME2 NUMBER L_JOBCOUNT2
                   AND RETURN.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              JOBCOUNT  = L_JOBCOUNT2
              JOBNAME   = L_JOBNAME2
              STRTIMMED = 'X'
              PREDJOB_CHECKSTAT = 'X'
              PRED_JOBCOUNT = L_JOBCOUNT
              PRED_JOBNAME = L_JOBNAME.

    Hi Thomas,
    Thanks for all helps, I found the solution!
    Inserted a select from the Job Status Table into th second job definition.
    Thanks for the ideas!
    Tamás
    The finally code is the the following:
          L_JOBNAME = 'REQUEST_COPY'.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              JOBNAME  = L_JOBNAME
            IMPORTING
              JOBCOUNT = L_JOBCOUNT.
          SUBMIT RSSEM_REQUEST_COPY
                       WITH RNR = I_RNR
                       WITH S_CUBE = LS_CUBES-SOURCE_CUBE
                       WITH T_CUBE = LS_CUBES-TARGET_CUBE
                       USER SY-UNAME VIA JOB L_JOBNAME NUMBER L_JOBCOUNT
                       AND RETURN.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              JOBCOUNT  = L_JOBCOUNT
              JOBNAME   = L_JOBNAME
              STRTIMMED = 'X'.
          L_JOBNAME2 = 'REQUEST_CLOSE'.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              JOBNAME  = L_JOBNAME2
            IMPORTING
              JOBCOUNT = L_JOBCOUNT2.
          DO.
            SELECT SINGLE STATUS FROM TBTCO INTO L_STATUS
              WHERE JOBNAME = L_JOBNAME
              AND JOBCOUNT = L_JOBCOUNT.
            IF L_STATUS = 'F'.
              EXIT.
            ELSE.
              WAIT UP TO 1 SECONDS.
            ENDIF.
          ENDDO.
          SUBMIT Z_REQUEST_CLOSE_ZSD_P25
                    USER SY-UNAME VIA JOB L_JOBNAME2 NUMBER L_JOBCOUNT2
                    AND RETURN.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              JOBCOUNT          = L_JOBCOUNT2
              JOBNAME           = L_JOBNAME2
              STRTIMMED         = 'X'
              PREDJOB_CHECKSTAT = 'X'
              PRED_JOBCOUNT     = L_JOBCOUNT
              PRED_JOBNAME      = L_JOBNAME.

  • Schedule Background job using transaction CATM

    Hi all,
    Since we cannot schedule a background job using transaction CATM, I have created a program calling the CATM transaction through batch-input.
    I have done a recording and entered the coding in a Z-program. For a vendor, I have recorded time in CAT2 for multiple purchase orders.
    After entering the vendor number in CATM, all the purchase orders showed up. I have clicked 'select all' and posted.
    When I run the program in the background, it posts only for one purchase order.
    When I  run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
    How to read the whole stack and post the whole stack of purchase orders? 
    Please help me out with this.
    Thanks
    Regards
    Srinivasan Desingh
    408 368 3837

    Hi,
    When I run the program in the background, it posts only for one purchase order.
    When I  run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
    See..it's a Z-program so Its difficult to answer without checking the program. But I think, you should check your BDC again from Debugging, with the help of your abaper. You will find, why its is processing only one entry.
    Regards
    Shishir

  • Error during scheduling while running Run order sequencing in PPR

    Hello Experts,
    An error saying 'Error during scheduling' is logged while running Run order sequencing in Production Planning Run and the job is failed.
    Checked the capacity of the resource but seems ok.
    The below long text is displayed next to the error message.
    Error during scheduling
    Message no. /SAPAPO/OM043
    Diagnosis
    The system could not schedule an order, operation or activity.
    This could have the following causes:
    The resource does not have any free working time or capacity.
    If you have set planning direction backwards in the strategy profile:
    There is not enough working time or capacity available for scheduling between now and the scheduling date.
    If you have set planning direction forwards in the strategy profile:
    There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
    If you plan characteristics-dependently:
    You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
    The system cannot find any suitable characteristics on the resources and so it cannot schedule.
    Procedure
    Depending on which of the above reasons is the cause, change the following settings:
    Change the working times and capacities of the resources.
    Set the planning mode "infinite planning" in the strategy profile.
    Activate the planning direction forwards or backwards and reverse in the strategy profile.
    Change the characteristics that you have assigned to the resource.
    Can anyone let me know what else need to check to avoid the error.

    Dear Maddy,
    The function "Reschedule" follows an all-or-nothing logic, which means that either all selected activities on a resource can be re-scheduled or the function (better the liveCache) cancels and no activities will be re-scheduled.
    One reason might be that you have a pegging relation to a fixed activity (this might be a sales order, forecast, an activity outside the propagation range...) which cannot be considered during the
    scheduling. The liveCache cannot break the pegging, therefore it cancels the scheduling.
    Please have a look at the note 510669 which offers a heuristic on the basis of the algorithm /SAPAPO/HEUR_PLAN_SEQ_PACKAGES. This heuristic should solve your problem. It will re-schedule as many activities as possible and will not cancel if one fails.
    Depending on your current release there could be also some correction notes like
    1272960
    1027194
    I hope I could help you further.
    Regards,
    Tibor

  • Automatic scheduling of report and send the output  to user via email

    Good Morning,
    Please i need to scheduled report and send the output via email in Discoverer . Please can someone assist in how to achieve this ?

    Hi,
    You cannot schedule and email a Discoverer report using standard Discoverer scheduling. You have to use a third party scheduler and Discoverer Desktop running on a windows PC.
    This presentation has some more details on how to do this.
    Rod West

  • Scheduling jobs in OWB 10.2

    I'm busy with a migration of OWB 10.1 to 10.2 and I had almost everything up and running
    except
    the scheduled jobs.
    In 10.1 my predecessors made scheduled jobs which started in their turn a procedure which then started the process flow with wb_rt_api_exec.
    After migration I could not get those jobs going anymore.
    After investigation I could see that the procedures (starting the proess flows) ran when started with the runtime rrepository owner as launcher.
    Even te jobs ran when they were started with the session credentials (iow the credentials from the logged on user being the runtime repository owner).
    I've seen the atricles telling that you need to set the preferred credentials to the runtime repository owner in oem if you want to get it running from there.
    Anyhow I could start it by recreating the jobs with the runtime repository owner as the creator.
    Doens anybody know why it could run in owb 10.1 with sys as creator and why it nn longer works in 10.2.
    I checked the 10.1 installation and I haven't found any priviileges granted to sys that where not granted in the 10.2 installation, so there is no diff.
    Any help would be welcome.

    Hi,
    You cannot schedule direct mapping. You need create Process flow then u need to attach calendar for that. Go to Control Centre Deploy process flow and schedule and further click on start.
    Regards,
    Ava

  • Scheduling SSIS package fails

    Hi,
    I've successfully created a SSIS package and I can execute it manually. Now I am trying to schedule it as a job to run daily at certain time. For this, I tried to create a job through 'SQL Server Agent' in Sql Server Management Studio. But when I configured
    the Step properties and clicked 'Ok' it is throwing this error.
    TITLE: SSIS Execution Properties
    The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.".
    This occurs when CPackage::LoadFromXML fails.
    ADDITIONAL INFORMATION:
    The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.".
    This occurs when CPackage::LoadFromXML fails.
    I am using Visual Studio 2010 for creating package and SQL Server 2008 R2. Also, I gave my credentials in the package's connection string. And I am trying to schedule the job with the same package credentials as the job owner.
    The Protection Level in Visual Studio was set to 'EncryptSensitiveWithUserKey'.
    What am I doing wrong to create a job step?
    Thanks for any help!

    Hi CRMProgrammer,
    Based on my research, the error “The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value
    from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.” always occurs when you open or deploy a higher version SSIS in a lower version SQL Server.
    Based on your description, it seems that the package is created in SSIS 2012, while you trying to schedule it in SQL Server 2008 R2. SSIS versions are not backwards compatible. Please notice that once a package is upgraded from SSIS 2008 R2 package schema
    to SSIS 2012 package schema, the package cannot be downgraded. So we cannot schedule the SSIS 2012 packages in SQL Server 2008 R2 anymore.
    To work around this, we should recreate the package in SSIS 2008R2 or schedule the package in SQL Server 2012.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for

  • Fed Up with BT's Complaint Department

    At the end of augest i split from my ex-wife and as the broadband was in my name she had to take out a new contract for the bt infinty, i was told at the time that i would not have to pay the £30 cancelation fee by the advisor "as its not really a ca

  • E71 music player error

    ever you got your music player doesn't respond when you click "refresh"? and new song doesn't display on all song list? please help me..I really need your help.. thanx sooo much before...

  • Ica citrix

    I don't understand how all of this works so i'll just describe what is happening. I recently had to reinstall windows XP onto my computer and when I wanted to get into my computer at work, which uses ICA Citrix, i got a message saying i must instal J

  • Copy / Paste Properties

    Hello, I have had success with cutting and pasting Behaviors but not Properties. Is it possible to cut and paste Property parameters (Transform - Position, rotation, etc.)? And if so, how? Thanks, Ines

  • Adobe Download Assistant won't complete download Acrobat Pro xi

    Adobe Download Assistant won't complete download. It says downloading 501mb, and when it does that it goes around again and again. My download speed is about 7mb, so it shouldn't take more that a couple of hours at most...