Cannot schedule the job at the time of AM when "multiple time a day"

Dear all,
I met this bug by the step below:
1/ open the Data Services Management Console
2/ select administrator.
3/ select the batch repository and click the "batch job configuration"
4/ select one job and select "add schedule".
5/ I choose the "Multiple times a day"
6/ and I select "AM" (default is PM)
7/ click "apply"
8/ I found that the time go back to "PM", which I have set into "AM".
Cannot I set the time as "AM"? is it a bug ?or by design?
Thanks.
Jeff.

what is the OS locale on which Management Console is running (tomcat) ? is it Japanese or Chinese
there was a issue fixed in 11.7.3.9 and 12.2.0.0
what is the version of DS you are using ?

Similar Messages

HT1178 I have set up Time Capsule to use with Time Machine. When I open Time Machine it 'cannot find' the Time Capsule and I have the Select the Disk each time. In the Next Backup tab it always says "When disk is connected" even though the disk is alrea

I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.

Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !!

CCX User to edit the Time of Day settings?

We have CCX Premium 7.0(1) with a few CSQ's for various different incoming calls.
Each of these CSQ's have defined opening hours using the Time of Day field in the associated script. Because of the bad weather in our area recently I've had to change the time of day field to reflect the office closing early.
Although not a difficult or particularly time consuming job, it would be nice if I could leave it to someone else to make the changes as and when they need to. I was thinking of giving a user access to a number which they would call, follow some prompts, enter the necessary opening/closing times and then make this live on the necessary CSQ.
Does anyone know if this is possible and if so is there a "best" way to do it?
Thanks
Jeff

Thanks for reply Gergely.
I am trying to compare the Current Time with the time in XML doc as suggested in this post.
Lets assume you're going with your first version, have your users enter start/stop times in 24 hour format. For example, 930 for 9:30 AM, and 1730 for 5:30PM
Concat your two strings into the format of: startTime + "-" + endTime. I.e: "930-1730"
Write this value to a document
In your scripts, you'll need to read the document with the string we created above (into a variable, 'todString' in this example). You'll need a single dimension String Array as a variable.
String[] ToD
Assume you stored the ToD string as 'todString'
Set ToD = todString.split("-")
If (int.valueOf(ToD[0]) <= int.valueOf(T[now].getHours() + "" + T[now].getMinutes()) && int.valueOf(ToD[1]) >= int.valueOf(T[now].getHours() + "" + T[now].getMinutes()))
     True:
          /* within hours of operation */
     False:
          /* outside hours of operation */
Essentially what we are doing is this:
storing the hours of operations as "930-1730", once we split it, ToD[0] will be "930", ToD[1] will be "1730"
The "" in T[now].getHours() + "" + T[now].getMinutes() is important, without it you would simply get back a integer result of hours plus minutes.
int.valueOf() turns our Strings into numbers which we can compare. If the startTime is less than or equal to the current time, than we're open. If the endTime is greater than or equal to our current time, we're still open.
I am also trying to follow the same thing as my customer wants to manually change the Operation Hours.
Thanks & Regards,
Arpit

DVR STB will not hold the display of the time of day.

I am new to FIOS. I have a DVR Set Top Box for my HD TV. I prefer to see the time of day displayed. I set this option in Menu/Settings/Set Top/Display and it works OK UNTIL you change the channel. Then it displays the new channel and DOES NOT revert back to the time of day as it is supposed to do.
Called Verizon. They reset the box. It worked OK for about 30 minutes then went back to the same problem. I don't want them to reset it again because when they did it wiped all of my favorites.
Any solutions will be greatly appreciated.
Solved!
Go to Solution.

Try rebooting the STB and then change the clock setting and change it back. That worked for me when i had this issue. I have seen this reported a couple of times and most of the time if this fix didnt work, the issue resolved itself within a couple of days.
Also, it should be noted that with the 1.7IMG release they changed the way the front display functioned. It now changes to show the channel number at every program change and then reverts back to showing the clock after about 2 minutes.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

How can I print a month calendar without the times of day from the day calendar

The obvious way to put items into iCal is via the day calendar. But I want to print the calendar as one month to a page and there I do not want the times of day.

It seems like a simple solution must be at hand. There is an option in the iCal Preferences (General) panel--Show event times. With this command unchecked the screen view of the month view is free of the times of day, but when I print the month view the times of day are printed.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

Hello THIS IS RAZA I GOT A MACBOOK PRO I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks Screen Shot 2015-03-21 at 10.

Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks

This is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV . My photo apps is Version 1.0 (209.52.0)

Have you tried deleting the photo cache from your computer and then re-trying the photo sync and see if they all then copy over (you need to select and sync all the photos that you want on the iPad together in one go, as only the most recent photo sync remains on the iPad) ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Don't know about the Facebook photo emailing, but there are a number of apps that allow to upload photos to their site (e.g. the 'official' Facebook app).
(For future info, typing all in capitals is considered SHOUTING - you are more likely to get help/responses if you don't.)

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

How do you change the time of day presets in ical?

How do you change the time of day presets in ical? I would like them to be only 1 hour difference, with the preset start times of 10:00 am and end time of 6:00 pm, if I have anything starting after 4:00 pm it also changes the date to the next day. Incredibly annoying!

Hi there jenni6,
It looks like this is possible in the Calender prefernces. Take a look at the article below for more infromation.
Calendar (Mavericks): General preferences
http://support.apple.com/kb/PH14994
-Griff W.

The time of day doesn't sinc from my iphone to my pc is there a way to set that?

The time of day on my PC doesn't sync with my iphone 4S in my calender. The PC shows the event 3 hours behind the iphone. Is there a setting I need to change?

Unfortunately you can't restore an incomplete backup.

Is there an app that can control the ringer volume by the time of day?

Is there an app that can control the ringer volume by the time of day. Like say i had work. Is there an app that can automaticly change the ringer volume on certain days at times you input to lower the ringer volume?

Can a app like this be made or will apple not allow it?

Question about reseting the time of day trigger.

A little while back the college was running a promotion and at the last minuet they decided to stay open later then normal to server the needs of our students. I reset the time of dayclosing time with the CCX editor and ga 6 the phone shut down when I had change it to 7:00. I then rebooted our contact center servers so that the new close time would be active but in rebooting the 2 servers all the callers in queue were dropped. Is there a way to change the time of day trigger and rest it with out rebooting the servers?
Thanks
Eric

Hi Eric,
When you edit the UCCX scripts \ prompts \grammers \ applications, please refresh these pages from the UCCX Admin-> Application path.
Yes, as the UCCX high Availability works in "Warm standby" modes it is expected that the calls in Queue will be dropped, where as the connected calls will continue at the cost of missing Call details.
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers!!

How do I see the time of day a call was received on 4S?

Can anyone tell me how to see the time of day a phone call was received or sent on the IPhone 4S?

Phone>Recents...tap the "Blue" chevron.

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible?

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible? Of course the GPS location feature will need to be on in order for this to work. But the idea here would be to optimize battery life by disabling the 'call home' requests of apps. The settings profile should also support downloads as I would like to download and allow it when I am on WiFi but not so much when I am using my cellular data.

No, this is not possible as the sandboxed nature of iOS would not allow any app to modify another app like that. Such a feature would have to be enabled by Apple as a part of iOS itself. You can submit feedback to Apple about the idea if you wish to.
https://www.apple.com/feedback/

Scheduling process chain 3 specific times a day

Hi ,
my requirement is to schedule a process chain 3 times a day.
i have gone through the forum and got the solution EVENTS.
please provide me how to do this in detail like step by step.
how to create a event in SM64 and how we will define the time there.
and creating a ZPROGRAM with the function module (please provide step bystep).
thanks
Sridhar

You create user events in SM62. In SM62, next to "User even names", click on <b>Maintain</b> and press Enter. Click on the Create icon to create a new event (let's call it ZEVENT).
Next, in your process chain, change the Start variant to be scheduled "After event", and put in ZEVENT for the event name. Also, click on the "Periodic job" at the bottom. This will automatically reschedule the jobs for the process chain after it executes.
Next, create an ABAP program (let's call it Z_EVENT_RAISE) to call the function module BP_EVENT_RAISE. You're code can look like this:
REPORT Z_EVENT_RAISE.
PARAMETERS: P_EVENT LIKE TBTCO-EVENTID.
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
EVENTID = P_EVENT.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
This ABAP program will prompt for an event name, so you will need to create a variant (let's call it ZEVENT) which will save the value of the event name (also ZEVENT). You will need the variant name to be able to trigger the event in a batch job.
Now all you need is the batch job. Use tcode SM36 to create a batch job where you call the ABAP program (Z_EVENT_RAISE) using the variant (ZEVENT).
Note, SM64 only triggers an event manually.
Does this help?
Oh, and you can copy this job to schedule it three times a day.
Message was edited by:
Geo

Cannot schedule the job at the time of AM when "multiple time a day"

Similar Messages

Maybe you are looking for