Cannot search for name when assign questionnaire in E-Recruitment

Hi,
I am currently using e-recruitment (version 603), we have a problem where when we try to assign a questionnaire to a person, we can't search this particular person. The name was not displayed on the searched result list. But when I checked using BP, HRP1000 and HRP5102 I can see the record of this person. Any ideas why this persons does not appears on the search result?
Rgds
Ridzuan

Nicole and Roman
Thanks for your feedback. Nicole, yes your are right I am referring to the processor, this person does have BUP003 role. Roman, I have also checked the infotype 5102, the field IS_INACTIVE is NOT set to 'X'.
For you information, what I found was this person have an empty Address under Address Overview when I run the BP transaction for his profile. Once the address field was filled with his address, we are now able to search for his name and assign him as the processor.
Your feedback have help me to solve this issues, once again thank you.
Rgds
Ridzuan

Similar Messages

  • Cannot search for "@" symbol when using search function

    I am trying to create a calculated column which extracts the domain part of an email address. My problem is that no type of search formula (SEARCH or FIND) seems to be able to recognise the "@" symbol so I get an error stating that
    "The search TEXT provided to function 'SEARCH' could not be found in the given text"
    Even more bizarre is that if I do just a general search in my table (CTRL + F from inside Powerpivot) it cannot find @ symbols either. Could someone please explain why PowerPivot cannot search for the @ symbol (I haven't tested others) and whether there
    is a solution?
    The formula I was trying to use was:
    =SUBSTITUTE(A1, LEFT(A1,FIND("@",A1)),"")
    Obviously with A1 replaced by the column name of where my email data is stored.
    Any help would be much appreciated.
    Thanks.

    Both FIND() and SEARCH() should find the "@" in PowerPivot.
    I have done it many times.
    You probably have one row in your data set that doesn't contain "@".  That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
    Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
    This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
    Once you identify the problem row (or rows) you can make a decision about how to deal with it.

  • I have iPhone 4 but its very slow when i wright message or search for name finally when i use the keyboard its coming very slow

    i have iPhone 4 but its very slow when i wright message or search for name finally when i use the keyboard its coming very slow

    Try Settings > General > Reset > Reset All Settings.

  • How do I stop Imovie from automatically searching for videos when I open up program. I can't do anything when this happens. I checked my pref and it's not set to automatically do this.

    How do I stop Imovie from automatically searching for videos when I open the program. It will not allow me to do anything and I cannot start a new session.

  • Itunes store is a white screen, cannot search for music, any ideas?

    When I open my ITunes and go to ITunes store it loads but just gives me a blank white screen, I cannot search for anything to purchase, my ITunes needs updating but I no longer get the pop up notification for it, any ideas?

    Hey maggz2008,
    I have an article for you that should be able to help you address this issue with your ability to reach the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

    Hello, all.
    In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

    Click the search magnifying glass and uncheck "Search entire library".
    Type in the name of the track.
    Click the album of interest to show tracks.
    Select the track.
    Press the X in the search box to clear the search.
    Double click the track you want to start playing first.
    tt2

  • How can i remove the bar (where i search for websites) when i full screen for my macbook pro

    how can i remove the bar (where i search for websites) when i full screen

    ohhh k i got it but thats not what i am looking for, so when i full screen i want it to be like fully full screen like when i watch a movie i want nothing but the movie on the screen and when i bring the mouse up then the tab shows again thats what exactly I'm asking about.

  • 'Help cannot search for that phrase'

    I am getting the message 'Help cannot search for that phrase' while searching for 'xml' in a chm (generated using RH9). The old CHM (generated using RH8) shows the results for the keyword xml. Is this a known issue? Any workaround to resolve this issue?

    I just tried in a Rh10 project and got the same result in a CHM but not in WebHelp, there the search worked so I suspect it is something in the Microsoft Help Compiler.
    There is a solution if you can upgrade to Rh10. That allows you to generate WebHelp and then convert it to a skinned CHM. I just tried that and there the search worked in the CHM.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I have checked "Search for text when I start typing" but it is not happening since your latest update.

    I have checked “Search for text when I start typing” but it is not happening since your latest update. This is very important to me as I keyboard - not use the mouse. What can I do? Also, before the last update I could leave the window (alt+tab) and return and just type and it would type it is the search box. Now I have to take my hand off the keyboard and get the mouse three times for every search, slowing my work way, way down. What other flag do I need to put this back the way it was? Should I also remove the “Automatically check for updates” so that this will not happen again? Please, please help.

    Hi CynthiaP,
    You should look at the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. It may just be an issue with the pref file!
    Hopefully this helps!

  • My z3 cannot search for provider.

    my phone cannot search for provider.

    Hi razman199,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    if you continue to have issues after replacing the SIM card, you would be best to contact our Customer Care team to see if they can get the handset checked by a service agent, or simply take the handset back to the place of purchase.
    http://support.sonymobile.com/global-en/contactUs/
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Mountain Lion Mail cannot search for non-alpha characters in Subject Lines

    Under 10.8.3, Mail 6.3 often cannot successfully find messages if the search string contains a non-alpha character.
    I have only tested this searching for Subject lines that are KNOWN to contain non-alpha characters
    Specfic examples:
    Subject starts with "[ABC..."
    Mail cannot find it if you search using "[ABC"
    Mail CAN find it if you search using just "ABC"
    Subject contains the numeral "2"
    Mail cannont find it if you enter "2" as the search string...even if you further constrain the search to "Subject contains: 2"
    Other problem characters I have found:
    The failure when using square bracket is a real pain since a lot of mailing lists are tagged using strings wrapped in square brackets.
    Sometimes it WORKS when I include multiple non-alpha characters in the search string, like "55" or "4/19"
    Anyone else see this?

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Systems not appearing/Cannot search for systems

    Greetings,
    I have defined two systems that call BAPI's (via RFC) on an instance of SAP that we utilize for testing. Using Visual Composer 7.0, we were able to use the "Find Data" option to search our portal instance for systems, but this feature does not seem to be present in the CE 7.1 version of VC.
    We were initially trying to migrate the Visual Composer iViews that we created from our 7.0 portal to our CE 7.1 portal. We defined these two systems in the portal and assigned the correct permissions and connection strings before performing the migration. The migration wizard in VC asked us to define the new system names, but the dropdown box that is supposed to contain the defined systems was empty.
    My questions are...
    1. Even though we've defined the systems in CE 7.1, why are they not appearing during the migration process as options?
    2. In VC 7.1, the search function does lot list systems as an option. I have tried searching all of Portal Content, but no systems appear in the results. How do I search for systems defined in the portal so that I can define a data source?
    Thanks and I appreciate your help.
    -= Michael

    Hi Michael,
    first of all the connection to an ABAP system via portal system object as you have used it in VC7.0 should also work in VC7.1. Maybe there is an issue with your configuration. There is also another option to setup the connection via RFC connection in the SAP NetWeaver Administrator. Anyway I suggest that you try to establish a connection via RFC, which is described in the [Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc71/rfc+destination]. If this connection will work then you should investigate why the connection via system portal system object is not working.
    Please let me know if you have success with the RFC connection.
    Best Regards,
    Marcel

  • [CS5.5][Os X 10.7] Problem searching for file when placing a picture

    Hi,
    With this post, I would like to ask a question.
    In Indesign CS5.5 on Mac Os X, when placing a picture using the place option, there is in the top right corner a search field. When browsing to a certain network folder and trying to search for files whitin that folder, which have filenames containing a part of the search string, no files are found.
    For example: a folder containing 200 files with names starting with "sports baseball 001" up to "sports baseball 200". When searching for "baseball" no results are found.
    What I could find on the internet, are several discussions relating to huge problems with Spotlight on 10.7 and 10.8 and network drives.
    Does anyone know of any fix or plugin for Adobe Indesign that allows fast file search in a folder when placing a picture in a document?
    Whe have this issue with all our mac's running these versions of Os X and Adobe Indesign.
    Any feedback would be helpfull.
    John

    Good to hear that Adobe engineering is taking a look. However you might want to file a formal bug/feature report here: Wishform, to get it on record as a customer/user problem, and to perhaps attract additional requests from others who have the same problem.
    I'm not sure if the commercial Mac application Default Folder X would fix the problem. You might want to test their trial.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • Error 206, cannot search for downloads

    I purchased an album in Itunes but when I try to download I get the message 'unable to search for downloads, unknown error 206. I can donwload apps without a problem. I contacted apple but they cannot help me. I switched of my firewall but this did not help.  Anyone has a fix?

    Both FIND() and SEARCH() should find the "@" in PowerPivot.
    I have done it many times.
    You probably have one row in your data set that doesn't contain "@".  That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
    Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
    This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
    Once you identify the problem row (or rows) you can make a decision about how to deal with it.

  • ICloud deleted my contacts but i can still see them when i search for them when im texting... how do i get my contacts back?

    I tried out iCloud today and it took away all my contacts...and no i did not set up time machine
    when i searched online to see what the problem was all i got was "back up the device" or "turn the contact button off and on in iCloud and then hit merge"
    I did all of that but my Wi-Fi at my college ***** whale so i cant "merge" my contacts even though im pretty sure backed it up already 2 times with the contacts switch in the on position meaning that my contacts must be gone...
    but theres hope when i was texting i searched a name in the "contact search bar" and all my contacts are still there!
    soo someone please help me get to the next step for getting them back before i go insane! thanks!

    this just rearanges the icons in the same order but with the screen still set up with only 16 icons an the bottom 4 (muisc mail...) missing    are there any other ways i can get them back?

Maybe you are looking for