Cannot see a user id when assigning Business Rules to a user

User is properly provisioned in Shared Services. But cannot see her when assigning Business Rules security.
please help me with this issue.
thanks,
Ricky...

Hi,
In AAS, under HBR node, right click Administration and refresh user list.
You could also try to refresh the security from shared services.
HTH
Seb

Similar Messages

Problem with BP. Assignment: Business partner person to user not unique

I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
Jorge

Hi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

I never had this problem before but all of a sudden when I go to "edit" a photo the photo turns black. All the editing functions appear but I cannot see any picture. When I hit "done" the photo reappears. Why can I no longer see my photo for editing pu

For years I have had no problems editing photos. However, for some reason when I go to "edit" my photo the photo turns BLACK/BLANK. The editing functions appear but I cannot see the photo. When I select "done" the photo reappears. Why is the photo disappearing for editing? Have I hit a command accidentally that is causing this? Really appreciate someone's assistance.

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions, followed by Option #4, Rebuild Database, if needed.
OT

Unable to provision Business Rules access for users

Hi all,
Our analytic server is properly configured in Shared Services : we can correctly create users, provision Essbase access for those users, change password, etc...
An application business rules is visible in the left pane of shared services, but we are not able to provision Business rules access for users.
When we try to provision access for a user, we have only access to the Analytic properties.
What's going wrong ?

It sounds like the user you login to HSS with hasn't been assigned with "Provisioning Mgr" rights to business rules.
Get the HSS admin user to grant you these rights and you should then be able to provision users to use Business RUles.
Gee

9.3.3 Upgrade, null pointer exception when accessing business rules and mac

Hello,
We upgraded from 9.3.1 to 9.3.3. In the Essbase Administration Services Console, when I attempt to access business rules or macros from a client PC, we get a null pointer exception. The message does not tell us much, but I cannot find more.
I can access business rules and macros using EAS Console from the server. Do I have a bad installation, or have I missed a step?
Thank you,

Hi,
You might have to re-organize your application module hierarchy to place your common code.
If your intension is to auto populate the primary key for your Entity Objects., I would suggest below common practice.
1). Create a Base Entity Impl class for your project that extends oracle.jbo.server.EntityImpl
2). Code your getDbSequence() method inside this base entity impl class
3). Make sure that all your Entity Objects extend your base entity impl class
4). Use EL expression to call this method for auto-generating primary key attribute of your Entity Object.
e.g., adf.object.getDbSequence("sequenceName")
Regards,
Eshwar

Error when assigning business partners to positions in org. mgmt.

Hello,
I've got the following problem. I want to assign business partners to a position in organisation management. When doing this, the following error occurs:
"Object cannot be assigned to object xxx in the period xx.xx.xxxx - xx.xx.xxxx"
(xxx is the position to which the business partner should be assigned)
The number of this error message is 5A368.
Diagnosis in the detailed description of this message:
"The object period of object '1st Level Support' is not within the relationship period 26.03.2007 - 31.12.9999."
I've changed the object period of the position "1st Level Support" to several other dates, but it did not solve the problem.
The described problem does not occur, when assigning an user to this position.
Can anybody help me with this problem? I'm using SolMan 4.0.
Thank you in advance!

Thanks for your answer so far. Unfortunately it's not possible for me to upgrade to SP11. So I tried to solve the problem the way you described. I double-clicked the position on the left, the desired position is shown in the main screen and I try to assign the business partner to the position. But the same error appears.
Are there any other possible solutions?
What are the consequences of assigning users to a position instead of business partners?

Network Error []: Cannot Get Host Name when running business rules

Guru's
We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
Network error []: Cannot Get Host Name
The following is then logged in the Essbase Application logs:
Local/Application/Database/admin@Native Directory/Error(1042022)
Network error []: Cannot Get Host Name.
A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
The environment is 11.1.2.0 and the architecture is as follows:
Server 1 - MS Server 2008 x64:
Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
Server 2 - MS Server 2008 x64:
Essbase Server
Server 3 - MS Server 2008 x64:
Framework Services, FR Print Services
We have tried doing the following:
1. Put in the server host names into the hosts file on the Hyperion Servers
2. Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
      - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
     - Added a new DWORD Value named MaxUserPort and set it to 65534.
     - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
4. The Essbase Config file has the following settings:
NETDELAY 2000
NETRETRYCOUNT 2500
Has anyone come across this issue and if you managed to resolve it, how did you go about it.
Thanx

Hi Rahul
The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
Thanks

Automatic comm channel when assigning Business system during configuration

Hi all,
In scenario file to file during Configuration,
During assigning business system there is a check box:
<b> 'Create communication channels automatically' </b>
I am planning to use File adapter on both receiver and sender side..
The question is Do I check this box or not ? If I do check this box it creates for me HTTP adapter ...Do I need it or not? I am clearly only using file adapter
thanks all !
Jon

U cannot use it in ur scenario. This function is supported for the following adapter types:
- XI Adapter
- HTTP Adapter
- IDoc Adapter
- RFC Adapter
See this
http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/content.htm
Regards,
Prateek

Cannot see all mail accounts when I open up Mail

Having down loaded iOS 5 for iPad, I cannot see the arrows which takes the user back to other Mail accounts

First thing... do a simple reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now, is that screen viewable?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot see whole flash movie when previewing

hi
when i preview F12 my flash composition, i cannot see the entire flash movie.only part of it. the rest is cut off. and there are no scrollbars to move the image to see the rest of it. how do i fix this?
regards
Angus

When you preview the size of the preview is the Stage Size set for the document.
You can change this in the document properties panel (Ctrl+J or Modify/Document or double-click on the framerate or Size in the properties panel when nothing is selected)
Change this to the size you are building for, and the preview will reflect it.

I cannot see the verification letters when asked to type them in. What can I do?

If I need to post on Craigslist, etc, they will ask me to type the letter seen above, and I cannot see any letters there. Therefore, I cannot post on any website . What can I do? These are verification letters/numbers.

See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
You should really update your very old Firefox 3.0.19 version to supported Firefox version
The Firefox version that you use is no longer maintained with security and stability updates.
Using unsupported Firefox versions is at your own risk and makes you vulnerable to attacks.
*Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*http://en.wikipedia.org/wiki/Vulnerability_(computing)

Cannot see the application window when the program is run

I wrote a java GUI using Jbuilder. I cant see the application window when i run the program. THe program compiles successfully but the application window pops up only showing the blue title bar and minimize maximaize and x out icon on it. I done see my GUI or anything below the 1 inch long blue title bar. Can someone plese tell me what i am doing wrong. Thanks.

A quick look-up in the API confirms that pack is not deprecated. Setting the size of the window to a specific size is quite a bit different than what pack accomplishes. Pack determines the preferred size of all of the components, lays out the layout manager and then sets the size of the window based on the size of the components inside of it. Calling setSize, however, will force the window to be a specific size no matter what the components want and thus creates a window that is probably not the right size for the components inside of it.

Frontier email, text is way too big for screen, cannot see it all even when scrolling completely left to right. How can I make smaller?

I only have this problem with my Frontier email page. The text of the emails is so big I can't see it all even when scrolling completely left to right. It's like it is zoomed in about 200%. Is there something I can do to zoom out with some tool or is this a Frontier problem or a computer problem?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Error connecting to Essbase Server when running business rules

We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
Sabrina

Follow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina

Error message when running Business rules

Hello,
We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
[Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
Logging out user [brlpo], active for 63 minutes
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.CurrFcst does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.Curryr does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
Would you have an idea of reason of error code?
Thierry

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

Cannot see a user id when assigning Business Rules to a user

Similar Messages

Maybe you are looking for