Cannot see adapter engine messages in message monitoring

hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in  communication channel monitoring

Hi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards

Similar Messages

  • Unable to find OLD messages in RWB Adapter level message monitoring

    Hi Experts,
        I have peculiar issue regarding the messages at the adapter level.
    I see some messages in SXMB_MONI. I take the message ID from MONI and go to the Adapter Level Message Monitoring in RWB, but i do not see any message for that message id.
    This is not happening for recent messages, but some old messages (2 months or so), we are unable to find the message at the adapter level.
    I also tried chosingthe option, display from archive, but no use.
    Can someone help me out??
    Thanks and REgards,
    Ravi

    >
    Amit Gupta wrote:
    > directly executing a query in your db.
    >
    > Thanks
    > Amit
    How do we do this?
    How do we access the backend database?
    Are the tools(SQL Client or Toad) freely available?
    Regards,
    Ravi

  • Authorizatoin error while viewing adapter engine messages

    I got below error from user and need to resolve.
    When I try and view adapter engine messages in XI Development system, I get the message "noAuthorizationJava"

    hi
    see this
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    also sap note 768456 - 928862
    Thanks
    Rod
    Edited by: Rodrigo Pertierra on Mar 27, 2008 11:24 AM

  • Adapter Engine Message Archiving

    Hello,
    Can anybody share with me the guide for Adapter Engine Message archiving for PI 7.1
    Thanks ,
    Loveena

    Hi,
    Refer these links, it should help
    XML Data Archiving - Configuration Guide for J2EE Applications
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/65901c2e-0801-0010-e79a-de4ed9275d70?quicklink=index&overridelayout=true
    http://help.sap.com/saphelp_nw04/helpdata/EN/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
    Re: Archiving message PI7.1 Could not find msg in archive error
    Regards,
    Nithiyanandam

  • RWB-Mesg Monitoring-Adapter Engine-Message Retention is only 1or2 days

    Hello Experts,
    I have a an Integrated Scenario, SOAP to RFC, in my landscape. As you know I can only monitor messages for an Integrated Scenario in Runtime Workbench -> Message Monitoring -> Adapter Engine. So, when I find my message related to the Integrated Scenario and click on "Message Details" I am not able to view the payload for any of these messages. I am sure there is somewhere on the Java stack flip the switch to view payload but not sure where. Any kind of help would be greatly appreciated.
    Thank you!!

    Please follow steps as below...
    1. Open http://server.domain.ext:5XX00/dir/start/index.jsp (Please modify according to your server name, domain URL and Port)
    2. Navigate and open Runtime Workbench after you log on
    3. Navigate and open Message Monitoring 
    4. Select appropriate Messages from Component: and From
    5. You will able to see Refresh button then |  View: and Time:
    5. Drop down Time: and you will able to do selection there Hourly, Daily, Weekly, Monthly and Yearly...
    Please let me know if you have any other question.
    Regards,
    Yogesh Patel

  • JBBD Sender - Problem with Adapter Engine - Message status Delivering -

    Hi all,
    I've a rare problem. My scenario is JDBC (EO) to IDOC. If the SELECT query from SQL database arrows 8000 lines, the message was sent from PI to R/3 succesfully and Idocs was generated.
    But if the query is larger than 10.000 lines, the message was stopped in the sender queue in AE with status "Delivering". In SXMB_MONI I can't see the message, only in RW in Message Monitoring or Component Monitoring in Engine Status.
    I've applied note  Note 937159 - XI Adapter Engine is stuck, and follow this blog
    /people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
    Using Configtool I modified these parameters (MaxConsumers). But message still puts in sender queue.
    I have in PI 7.1 SPs 0004.
    Any suggestions??
    Edited by: Pablete on Sep 13, 2010 8:41 PM

    I have the same requirement and for solving this, I have to apply a very complex select statement.
    But it works perfekt for MS SQL:
    select * from table where order_no in (SELECT distinct top(1000) order_no FROM table where any_clause) and any_clause order by order_no
    update table where invoice_no in (SELECT distinct top(1000) invoice_no FROM table where any_clause) and any_clause
    I create an IDoc for each order_no, so I have to make sure, that all lines belonging to one invoice are in the same select.
    My select statement has 463 characters

  • Adapter engine messaging URL returns HTTP 403

    Hi all,
    I currently have a problem with the following scenario: SOAP Adapter -> XI -> JDBC Adapter. I have configured the scenario and everything seems to be running correctly (in the component monitoring the adapters and the integration engine are green). However when I send a request to the SOAP Adapter I get the following response:
    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                             <context>XIAdapter</context>
                             <code>DeliveryException</code>
                             <text><![CDATA[
    com.sap.aii.af.mp.module.ModuleException
         at
    Caused by: com.sap.aii.messaging.srt.BubbleException: failed to call the adapter engine [null "null"]; nested exception caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 403.
    </text>
    </s:SystemError>
    In the Message Display tool of the runtime workbench I get the following trace:
    2005-06-05 11:03:08 Success SOAP: request message leaving the adapter (call)
    2005-06-05 11:03:08 Success Application attempting to send an XI message synchronously using connection AFW.
    2005-06-05 11:03:08 Success Trying to put the message into the call queue.
    2005-06-05 11:03:08 Success The message was successfully retrieved from the call queue.
    2005-06-05 11:03:08 Success The message status set to DLNG.
    2005-06-05 11:03:08 Success Message successfully put into the queue.
    2005-06-05 11:03:08 Error Returning synchronous error notification to calling application: Received HTTP response code 403..
    2005-06-05 11:03:08 Error Transmitting the message using connection http://<host>:8000/sap/xi/engine?type=entry failed, due to: Received HTTP response code 403..
    2005-06-05 11:03:08 Error The message status set to FAIL.
    2005-06-05 11:03:08 Error Returning to application. Exception: Received HTTP response code 403.
    So it seem that somehow the adapter framework is not allowed to send a message to the integration engine via the messaging URL.
    Any ideas how to resolve this problem?
    Thanks for you help,
    Christian

    Hi,
    If you've changed the passwords for XI service users
    then you may also want to check this note: 721548
    XI 3.0: Changing the passwords of the XI service users
    Regards,
    michal

  • How to archiving Adapter-Engine messages in PI 7.1

    Hello,
    How do I archive messages in Adapter Engine side in PI 7.1.
    Does anybody know some document describing that ?
    Arthur Silva

    Hi ,
    please go through the below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?QuickLink=index&overridelayout=true&49061411503734   ---  STEP BY STEP
    http://scn.sap.com/thread/1498569
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=147266890
    Regards
    srinivas

  • Adapter Engine Message in Delivering Status

    Hi All,
    Any idea how to cancel/delete the messages which are in delivering status in Adapter Engine.
    In my case a single EOIO message is stuck in the AE with delivering status. Other messages are flowing successfully using the same cc.
    Earlier during such cases we had to restart j2ee/ stop/start AF Messaging to resolve the problem.
    Just wondering if theres any other solution?
    btw : The message was in delivering status because the password mentioned in the receiver channel was wrong. There were other messages which failed but the status of those messages went into "System Error". Nothing wrong with that, but just wondering why did a single message remain in the "Delivering" status.
    I have already been through this thread Re: How to delete message in "Delivering" status. Only exists in Adapter Engine and didnt find/understand anything which could help me.
    Thanks
    Sumit

    Look at these blogs,
    How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework  :  How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
    XI :  How to Re-Process failed XI Messages Automatically
    Message stuck in Adapter Engine queue with status "Delivering"
    Hope this helps

  • Adapter Engine - Messages in To Be Delivered status

    Hello,
    I am using a SAP XI 3.0.
    Checking the Message Monitoring, I have seen that there are a lot of messages in status To Be Delivered. I think that this status in an initial status because then the message has to be set to Delivering in a next step.
    Specifically, the mentioned status is related to a Communication Channel which is configured as below:
    Adapter Type: XI
    Transport Protocol: HTTP 1.0
    Addresing Type: URL Address
    Target Host: A determined value
    Service Number: A determined value
    Authentication Type: Use Logon Data
    User Name: A determined value
    Password: A determined value
    There is no module added in Module tab.
    I think the problem is that messages are queued requesting any information but I do not know if there is any place to check it (in smq2 transaction, the queues are empty and this kind of channel is not shown in Communication Channel Monitoring).
    Thanks in advance.
    Best regards,
    Gemma
    Edited by: Gemma Boldu Capdevila on Oct 21, 2009 3:08 PM

    Hi,
    You have to clear that particular queue in message monitoring of RWB.
    Check the following links:
    http://help.sap.com/saphelp_nw70/helpdata/en/45/d4b62755002e97e10000000a155369/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
    Your problem should be solved now.
    Regards,
    Supriya.

  • When starting a Lync group message from a Mac, anyone else using a Mac cannot see the first message.

    When a group conversation is started from a Mac, any other Mac user will not see the first message unless they reply to the message immediately.  Here's what I've tested:
    Mac User 1 starts a group conversation with 4 people invited.
    Mac User 2 sees the popup but does not immediately open the conversation window.
    PC User 1 opens the conversation window and sends a reply.
    PC User 2 opens the conversation window and sees all the text.
    Mac User 2 finally opens the window about 30 seconds later and can see all text except the first message.
    Why does the first message disappear for Mac User 2?  
    Note:  This does not happen if the original message was started from a PC, in that case Mac User 2 would be able to see the first message.
    Thank you for any help.

    Hi,
    Did the issue happen only for single Mac computer or for multiple computers?
    Please try to login Lync client on another Mac computer with the same Lync account and test again.
    Please also try to login Lync client on the issued Mac computer with other Lync account and test again.
    Please check if the Lync client on Mac computer update to the latest version, if not, please update to the latest version.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • In the XI Szenario i cannot assign Adapter Engine in Communicationchannel

    Hi There,
    i have a new problem. I imported now the whole Scenario from my XI Cons System into the XI Prod System.
    After that i have to reconfigure the Communication Channels.
    URL etc.. but in Prod System i cannot Assign Integration Server to Adapter Engine..
    i maked a screenshot so you cann see what i mean:
    (If you cannot see the screenshots.. please provide me a Mail Adress.. then i can send them to you)
    This is our Consolidation System:
    http://img16.imageshack.us/img16/7546/xik1.jpg
    You see what i mean in the read mark.
    And here you can see our Prod System.. i cannot Assign here the Integration Server...
    http://img14.imageshack.us/img14/4581/xip1g.jpg
    Can you tell me whats wrong here?
    Thanks
    Bjoern

    Hi,
    please check this threads, this may help you
    Can not select Integration Server for Adapter Engine in File adapter
    No Integration Server under Adapter Engine at Communication Channel config
    Regards,
    pradeep A.

  • I am the owner of an account with 4 lines.  I cannot see the text messages for 1 of the lines.  How can I see them usage and phone numbers, not the content.  Thanks

    Looking to see the frequency and numbers texted on one of the lines which I am the account owner of.  I only see texts I placed to this number,

        Zoupie,
    This is something we can definitely figure out together! Are you able to get the phone for a few minutes? If so, please go to Settings>Cellular and scroll down. You will find a list of the apps on the phone. I'm curious to see if there are any messenger apps listed such as Snapchat, Facebook Messenger, Hangouts, ect...... These apps can send the messages via the internet connection instead of via our texting system and would not show up in our records.
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • I cannot see how many messages are in or the size of the trash or sent folders after upgrading to 3.1.10

    I recently upgraded my Thunderbird client to 3.1.10 from 2.2xx and I no longer can see the size of folders or how many messages are in certain folders. The folders do show how many are unread, but not the total messages or size of data in folder as I could with the previous version. If these options have been removed for some reason is there a problem with reverting to the previous version? Thanks, Dave English

    That was exactly what I was looking for. Thanks

  • Cannot see full email message in outlook 2011 inbox

    I can only see trancated emails after a one month, how do I display full email messages in the inbox.

    Hi,
    Please disable Aero in Windows to try again:
    http://www.howtogeek.com/howto/windows-vista/disable-aero-on-windows-vista/
    If the issue persists, please perform a clean boot to determine whether background programs are interfering with Outlook:
    http://support.microsoft.com/kb/929135
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

Maybe you are looking for

  • Restructuring of xml file

    I have an xml file which fails validation against an xsd because the elements in a segment are not in the correct order. Is there any way to hit that mis-ordered xml file against the xsd to re-order it, other than doing it manually??

  • Paragraph space after

    Hi I'm producing a daily  newsletter with sub-heads and we want to have a small space after the sub-head and before the body text But I don't the space to be as big as a line - more like half a line. I have tried changing the leading and putting as s

  • Create event on click of FileDownLoad UI Element

    Hi,      I have created an interactive form whose initial visibility is set the false. I have a      FileDownload UI element. Ideally on the click of the FileDownload UI,  I should      be able to see the interactive form in the same view. Please hel

  • Diskimagemounter problem

    Hey all, I'm a new mac user and I'm trying to make image files of some games I have. I tried using diskimagemounter but it won't even open for me, and it says that it has encoutered an unexpected error -600. Can anyone tell me how to fix this? Also I

  • In NUMBERS, on a iPad3, how do I get 1 cell to transfer to another cell on a different sheet?

    In NUMBERS, on a iPad3, how do I get 1 cell to transfer to another cell on a different sheet? Exm... Van 1, Auto Log, C7 to transfer over to Monthly report, April, C3