Cannot see Airport Extreme Base Station--Watch for 2.4Ghz traffic!

(Issue is addressed in the body of this post)
Great when working on 802.11n at 5Ghz, BUT...
If you have to be compatible with 802b/g you are forced to transmit at 2.4Ghz. Traffic at this frequency can be so bad that it made my station invisible (even with "Interface Robustness" activated). The "automatic channel selector" is supposed to choose a clutter free channel for clear communications, but it does not work well. I had to reprogram the station (through ethernet) to manually change the channel to a more stable one. In my case, channel 8 did the job.
After this, the Airport base worked perfectly!
I live in a condo area where I get 8 strong wireless networks, all at the same time. Add microwave ovens, TV's and cordless phones and you get a jammed 2.4Ghz highway. Make sure to select a channel that provides seagway to the "carpooling lane".

Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
Any help would be greatly appreciated.

Similar Messages

  • Airport Utility does not see Airport Extreme Base Station

    Purchased Airport Extreme yesterday at Apple Store to replace old Netgear Router. Wanted wireless network to work with 2 identical HP Laptops running XP with SP3 and 2 iPod touches, and possible future purchases of iPad 2 and Apple TV. Installed Airport Utility software from CD on Dell Studio running Windows 7. Connected Airport Extreme to cable modem and Dell Studio. Ran Airport Utility software to configure Base Station but it did not recognize the Base Station. Base Station had blinking amber light. Did have internet connectivity on Dell Studio, and wireless internet connectivity on 2 iPod touches, and on one HP Laptop. No wireless internet on other HP Laptop. But wireless internet connection was unsecured and Airport Utility did not see Airport Extreme so could not configure it to make it secure. Contacted Apple Customer support. After 30-40 minutes of attempting several different possible fixes only able to use Airport Utility to configure Airport Extreme remotely, wirelessly, from one HP Laptop, not the Dell Studio that is directly connected to the base station. Now that the base station is configured the network is secure. However, second HP Laptop cannot connect to primary wireless network. I created password protected "Guest" network using Airport Utility, and laptop is able to connect to this Guest network. From reviewing forums am now able to configure Airport Extreme with Airport Utility by using "Configure other" on Dell computer. But utility cannot find device by scanning. Would like to find way to (1) have Airport Utility on Windows 7 Dell see Airport Extreme by scanning and not using "configure other," and (2) have 2nd HP Laptop connect to primary network and not "guest' network. Any assistance would be greatly appreciated. Thanks.

    Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
    Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
    Any help would be greatly appreciated.

  • Macbook does not see airport extreme base station

    Hi
    I set up my airport extreme several years ago.  I recently noticed that, under "security," the guest network says "WPA2 secured," but the main network says "none."  Is this a problem; i.e., does the main network lack security?  Further, when I open the airport utility, it cannot find a base station.
    What am I doing wrong?
    Thank you!
    ron

    Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
    Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
    Any help would be greatly appreciated.

  • IMac does not see Airport Extreme Base Station wirelessly

    Trying to use my existing PC hooked up to Airport Extreme BS via ethernet cable, which works fine. I then open Airport Utility on my iMac and it scans for wireless devices but it can't see the AEBS (located beside it). Opening Base Station tab and there are no solid headers to click on, just the soft grey headers. I am fairly new to Apple product so if I've left any info out to further troubleshoot please let me know.
    Eventually I would like to connect my Apple TV, located downstairs, wirelessly as well as use an Airport Express (wirelessly) to boost the signal if need be due to concrete walls and floors in construction of house.
    I have OS X Version 10.5.8 (up to date), Intel, Airport Extreme Wireless Card.
    Thanks for any help out there.

    Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
    Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
    Any help would be greatly appreciated.

  • Mac book cannot find airport extreme base station

    Hi
    Basicly, the airport utility cannot "discover" the base station. Ever so occasionally it finds it but when i click on continue it says "there was an error connecting to the network"
    I have tried restarting the airport extreme several times.
    Please help!!
    Tom

    Have you tried doing a hard reset of the AirPort Extreme base station (AEBS)?
    Have you tried temporarily connecting to the AEBS via Ethernet to configure the AEBS?

  • Powerbook cannot detect Airport Extreme base station

    I bought a new Airport extreme and cannot connect to it wirelessly. I called and tried to do everything to fix the problem but ended up having to have a replacement Airport sent to me. The new one arrives and same problem. I can see other wireless networks but cannot see the one from mine. When restarting the base station, I see my network for a second but it goes away and I can't connect to it. I'm thinking it might be my computer but I can see other networks... any suggestions on how to rectify the problem?

    Ok, thanks. I can only see, at this time, five choices:
    Try each step one-at-a-time, until successful. After each step, try accessing the AEBSn via Ethernet.
    o Shut down the AirPort Utility, and then, restart it.
    o Unplug the AEBSn, wait at least 5 minutes, and then plug it back in.
    o Reinstall the AirPort Utility on your PC to rule out any issues with the initial installation.
    o Install the AirPort Utility on another device (PC or Mac) to see if it can access the base station.
    o Perform a "hard" reset of the AEBS.

  • Cannot configure Airport Extreme Base Station

    I have a base station in my classroom. It was plugged in 4 years ago stock, and it has run fine as is all this time. I started to get annoyed about temporary signal drops that occurred from time to time. I was told that updating the firmware would limit these (but not eliminate them)......and now my problem. I tried both airport utilities to no avail. Both give me error messages ("an error occurred reading the configuration") when every I try to set it up. I did a hard reset, but that did not alleviate the problem. I know the default password is "public".....not sure what to do from here. Any suggestions?
    The base station is running firmware 5.0.3....which is quite old. My laptop is a G3 iBook running 10.48.
    Interestingly the router still works pretty well.....I am using it right now to get on my school network...but I would like to put a password on it and update the firmware.
    Thanx
    Shawn

    Shawn, I'm having the same problem, exactly. I had to disconnect my networked HD for a while (renovations) and when I plugged it back in, I couldn't see the ethernet port. When I went to Airport Admin. Utility, I couldn't configure the airport base station.
    I went through the "cold start" procedures and used "public" but to no avail. I still have access to the 'net but am concerned that my security has defaulted to -0-.
    I am going to try to direct connect tonight when I get home, but if you have luck, would you please post your answer? I will do the same tonight if I figure it out.
    I've been pulling my hair out for a week trying to figure this out!!
    Good luck.
    Thanks,
    Dave

  • How do I set up an Airport Extreme Base Station ("Snow") for use as fax (on

    I'm on a PowerMac G4 Digital Audio version without a built-in modem. I already have a Linksys wireless network set up between my Mac and PC laptop. So... I don't want to use the wireless networking on the Airport...
    I just want to configure the Airport Base Station to use the built in 56K modem so that I can fax directly off the Mac. I did that on my old computer that had a built in modem, but I need to know how to configure this G4 and Base Station modem to perform this task.
    Please help me connect the right wires (does the G4 connect to the base station with USB?). Then the power cord, and an RJ11 line from the phone to the airport base...
    And what software (the used airport I bought doesn't have a software disc).
    Thanks for any help!

    Saxparilla, Welcome to the discussion area!
    Sorry but the modem inside the AirPort base station (ABS) has NO ability to FAX at all.

  • Nintendo Wii cannot recognize Airport extreme base station

    As titled. Installed the AEBS today, all seems well until I tried to setup the Wii for web surfing. But it couldn't found the access point that's related to the AEBS, but it find other access points that's not related to me. I also tried "manual" setup, but it still couldn't locate the SSID. Are there any firmwire to download and fix this problem?
    Please email me if you have any idea: [email protected]
    much appreicated.

    In finder, go to - Mac HD, Library, Preferences - drag the folder 'SystemConfiguration' into the trash
    Restart.
    Evidently, there were some corrupt files in there which, in my case, made my AP utility sporadically lose both my airport devices. Trashing that folder and the files within, and restarting automatically creates a new fresh system configurations folder. The AP Utility immediately found my hardware with this fix, but only time will tell if this was root cause and be a long-term fix.
    Best of luck.

  • About Apple AirPort Extreme Base Station?

    I Need A Wireless Router & i'm looking for Apple AirPort Extreme Base Station cause I Need a Wireless Router cause I Have at Home a Sony DVD Wireless Blue-Ray Player & i'm trying to Connect to The Internet on The Device but it's not letting me cause it say's I Have No Wireless Router to Connect to or Something? but I Connected The Sony DVD Blue-Ray Player to My 15inch Coby L.E.D LEDTV1526 HDTV & it Play's Blue-Ray Movies Excellent  it just I Cannot Connect to The Internet on there cause I Need a Wireless Router & I Wanted to know if Apple AirPort Extreme Base Station is The Right Wireless Router for Me? cause I Like Apple & I Would like to Get The Apple AirPort Extreme Base Station if it's ok with what I Need it for? I Never had a Wireless Router before, I Love Sony & I Love Apple they both have Great Products on My Sony DVD Wireless Blue-Ray Player I Can Stream Movies From The Internet & I Wanna do that let me know if Apple AirPort Extreme Base Station is ok for me Please?
    in My Bed Room I Have My 15inch Coby L.E.D LEDTV1526 HDTV & I Have My Optimum Cable HDTV DVR Cable HDTV Ready Connected & My Sony DVD Blue-Ray Player Connected to My 15inch Coby L.E.D LEDTV1526 HDTV But I Need a Wireless Router & is Apple AirPort Extreme Base Station right for me? all I Need now is Apple TV Next then i'm really Loaded Up.
    in My Home I Have Optimum Triple Play Package Deal, I Have Cable HDTV Silver Package with Optimum DVR & Optimum Online Boost Plus for Internet & I Have My Regular Optimum Phone Service all 3 from Cablevision in My Bed Room & I Have over 2000+ DVD Movies & Music CD's & on Apple iTunes I Have almost 1000 Music & Music Video's & Almost 1000 App's for My Apple iPhone 4 32GB & Future Apple iPod Touch 64GB & I Have 32 Movies on Apple iTunes & 4 TV Shows on Apple iTunes & I Have 70 Mac App Store Mac App's from The Mac App Store
    & in My Bed Room I Have My 2009 Apple 24inch iMac Computer & My Canon PIXMA MP480 All-One Photo Printer & My Apple Mouse & Apple Keyboard & My G-Technology G-Drive 1TB Drive & My Canon Powershot A2100 IS Digital Camera & My Apple iPhone 4 32GB From Verizon Wireless Connected To My 2009 24inch Apple iMac Computer so I Have lots of things going on in my Room. so have a Very Merry Christmas & Happy Holiday's & Happy New Year
    If Someone did not like the way I Made this Thread i'm Very Sorry I Did it in the wrong way, I'm Sorry & I Won't do it if it was the wrong way i did it? & i'm sorry I Made the Mistake & I Just thought i would get Help on the Apple AirPort Extreme Base Station I Needed help with & I'm Sorry what i did if You did not like it, I Have not been on here often & I Only come here if I Need help with something so maybe you could let this thread slide but if not? then it's ok & i'm still Sorry I Made it & I Did not mean to make it in a bad way if thats what you thought? so have a Very Merry Christmas & Happy New Year & Happy Holiday's from your Online Friend & Costumer Byron.
    Peace.

    Ok after Christmas was Over I Went to PC Richard & Son & was looking for an HDMI Cable & I Found it so then I Asked them about My Sony DVD Blu-Ray Player & told them about the situation that I can stream Movies from the Internet to The Sony DVD Blu-Ray Player & then I also talked to them about a Router so after that they had Showed me The BELKIN Share N300 Wireless N' Router & they said this is The Cheapest 1 & it was $29.99 plus tax, they said that I Can Connect that to My Sony DVD Blu-Ray Player to The BELKIN Share N300 Wireless N' Router & Connect The Belkin Share N300 Wireless N' Router to My Cable Optimum Online Modem then Connect The Wire from The Optimum Cable Modem to My Computer so now My Sony DVD Blu-Ray Player can Stream Movies from The Internet & also I Have everything Conected & working great & I also have Netflix on My Sony DVD Blu-Ray Player & I Can also watch Movies on Netflix on My 24inch iMac Computer to, everything is working fine so now 1 Very Last Question & i'll leave you alone
    if I Were to Buy Apple TV Can I Get a Wireless Home Networking Connection on The BELKIN Share N300 Wireless N' Router? or is it only can Work on an Apple Airport Extreme Base Station?
    I Hope you had a Happy New Year ok take care from Byron.

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
    If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
    If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

  • Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

    Hi,
    I just purchased a new Airport Extreme Base station for my 15" Macbook Pro. I set everything up this morning per the docs (all cables are connected properly) but the Airport Extreme is flashing an amber LED, which means it cannot establish communication to the network/Internet.
    I'm using an old Westell C90-36R516-01 DSL modem that has been working fine up until now. I've tried switching out the Ethernet cables and different powering on/off combos but nothing appears to work. When I connect the Ethernet cable directly into my laptop, I have to power down the DSL modem, power it back on, and then do several refreshes before I finally get an Internet connection.
    I read a previous post about unplugging the modem overnight and then plugging it in the next morning to wipe out the MAC address setting. I will be trying that tonight, but I was wondering if there was anything else I could try in the meantime? Or, is it simply a matter of having to get a newer modem from Verizon because this one is 7-8 years old? 
    Thanks for any help you can provide. 
    Solved!
    Go to Solution.

    Hi Max,
    Let's start from the beginning,  
    The ethernet from the modem should be wired to the Wan port of the Airport...
    On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
    I presume you installed the Airport utility from the disk that came with the Airport?
    For more information about the reason the light flashes
    Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
    Here is a link to the Manual  CLICK HERE
    I was hoping to find out more about the Airport utility to see what's it's capable of doing...

  • Airport Extreme Base Station as bridge for Westell DSL router

    I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
    Here is the situation (I rent so chances are we will not be moving hardware anywhere):
    - Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
    - One lonely Powermac G4 upstairs that does not have a wireless card
    - One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
    I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
    I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
    I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
    When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
    I don't understand why the AEBS seems unable to see the DSL network.

    Hi,
    Well, what I have been able to do is this:
    I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
    As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
    Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
    Anyway, I digress...
    What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
    Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
    Best regards,
    Patrick
    Macintosh G5, Powerbook G4   Mac OS X (10.4.7)  

  • PS3 can't see new Airport Extreme base station

    I replaced my old airport extreme with the latest one, but now my PS3, which is on another floor, cannot see the base station, and the new base station has a lot less range than the old one. With my old one I could sit out in the back yard with my laptop, and the PS3 picked it up right away over our wireless network, but now, nothing. My laptop connects okay, just can't go very far. Nothing has changed except the base station itself. Please help.

    Hello Uri. Welcome to the Apple Discussions!
    A few things I would suggest that you try to see if either or both help with the PS3's connectivity to the 802.11n AirPort Extreme Base Station (AEBSn):
    o If currently enabled, disable the Guest Network.
    o Use a separate Network Name for the 5 GHz radio. Make sure that the PS3 connects to the 2.4 GHz radio's wireless network.

Maybe you are looking for