Cannot see BOTH synched library AND iTunes Match library at the same time

I ran iTunes Match on my library of MP3 files and hit the maximum allowed 25,000 song limit in my paid iTunes Match account. Then I created a new version of my local/PC iTunes library with those 25,000 MP3 songs removed, and synchronized it with my iPhone 4s running IOS7 and iTunes Match turned OFF. So far so good.
So now I theoretically have no duplication between my 25,000 song iTunes Match library and my local iTunes library that resides on my PC.
But even though I have the "Show All Music" setting on the phone turned on, the iTunes Match songs don't appear on my iPhone until I also turn the iTunes Match setting on. But as soon as I do that, all of the songs I synched from my local iTunes library on my PC completely disappear- having been completely replaced by my iTunes Match library. If I then turn the iTunes Match setting off again (while still leaving "Show All Music on"), the iTunes Match songs also disappear, leaving my iPhone music library completely empty. Have I misunderstood the meaning of the "Show All Music" setting, or is something malfunctioning?
My question is: How can I make ALL of my songs (both the ones I have previously captured in ITunes Match AND the ones I synched with my PC via iTunes) appear on my iPhone at the same time?  This scenario seemed to be working just fine under IOS6 on the same iPhone.

I had a somewhat similar experience.  When I enabled paid iTunes Match on my iPhone 5, iOS7, all of my locally-stored songs on the iPhone disappeared and remained gone even after I disabled iTunes Match on the iPhone.
A chat session with Apple support revealed that iTunes Match will in fact supersede any synched content on the iPhone.  The suggestion from Apple support was to download on the phone all the previously-synched content via iTunes Match wireless connection.  Of course, that would take hours if not days.  And that crazy workaround won't help you because you want songs other than what you have in the Cloud.
It appears that various members of this forum have not had this same experience.  I'm not sure what's going on here.  Usually with Apple's tight control of hardware and software these anomalies are avoided.
And I didn't really need iTunes Match except I wanted commercial-free iTunes Radio (which I think is great, by the way).  At least for now, commercial-free radio (with a paid subscription) can be achieved only by enabling all of the iTunes Match features.  I'm not sure why Apple requires this bundling unless its part of a general push to a streaming model for everything (more revenue opportunities) as opposed to supporting local storage.

Similar Messages

  • TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

    How can i enable both paired bluetooth and ios keyboard input at the same time?
    This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

    You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
    I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
    https://developer.apple.com

  • Cannot PXE boot 32-bit and 64-bit hardware at the same time

    I have ConfMgr 2012 R2, but this same problem occured also with SP1.
    The main issue is, that 32-bit hardware clients are pulling 64-bit boot images. If I remove 64bit boot image from DP, everything works fine, but then, 64-bit hardware will stay pending for 64-bit boot image forever.
    So this means without jerking around with boot image availibility, I cannot deploy both architectures at the same time.
    I only use All-in-1 Task Sequence, which means that image selection is inside TS (UDI pages). So I have to keep both unknown Computers in the same collection and advertise the TS there.
    Primary site server restart and WDS restart does not help.

    for the PXE boot image, you may need to re-advertise (deploy) the TS again (after you have adjusted the boot image for the TS), this will ensure that this TS is "authoritative" for the PXE boot image.
    (generally, the last TS advertised in "in control" of the boot image offered by PXE)
    I don't think so... PXE will use the last updated boot image for that architecture, that is on the PXE DP. Then once you select a TS, then it will use the boot image assigned to that TS if it's different.
    John Marcum | http://mIyitforum.com/myitforumwp/author/johnmarcum/
    I admit I may have expressed it poorly, but my experience/observation on both CM07 and CM12 matches the principle, and apparently, also Jason's:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/1c9b448d-67cf-4b31-8a81-f053502d8cba/how-to-specify-which-boot-image-to-use-in-pxe-when-multiple-x86-boot-images-exist?forum=configmgrosd
    http://books.google.com.au/books?id=-SazACXZNz0C&pg=PA1049&lpg=PA1049&dq=how+to+specify+boot+image+jason+sandys+pxe+highest&source=bl&ots=yXdb1dqq_f&sig=KYuWJzb0et-yqts9akXX-W_G_Yk&hl=en&sa=X&ei=CM-2UqbJBaS8iAfmsYGQCg&ved=0CEkQ6AEwBA#v=onepage&q=how%20to%20specify%20boot%20image%20jason%20sandys%20pxe%20highest&f=false
    Yea, that's why I said I "think".... I ran into an issue recently where a new boot image was created and not added to the PXE DP. This caused PXE task sequences to fail. I assumed it was because that was the last one created. Maybe it was actually because it
    was the last one advertised. I stand corrected.
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • Possible to use both optical out AND regular line out at the same time?

    I currently have my computer speakers (logitech z560) hooked up to the mac pro via regular stereo jack in the back. I have an extra receiver that I would love to hook in to supply me with some needed sound for movie watching and what-not.. Is there a way to enable both line out - digital and line out at the same time?

    You can set DVD Player's "Audio output" to "Digital Out" in its "Disc Setup" preference, while other applications use Line Out.
    You could use a splitter on Line Out to feed your current speakers, and analog Line In on your receiver. When you want sound to both systems, set the receiver to Line In. When you want to watch DVDs, set it to Digital In. This will give you surround sound if the DVD has multichannel sound, and the receiver supports more than two channels.
    If you really want the same output on the Mac Pro Line Out, and Digital Out, you can use the "Auxiliary Device Output" effect in Audio Hijack Pro
    <http://www.rogueamoeba.com/audiohijackpro/>
    It will not support more than two-channel audio.

  • How do i connect both my ipad and iphone to wifi at the same time. i can one or the other connected but not both?, how do i connect both my ipad and iphone to wifi at the same time. i can one or the other connected but not both?

    ive just moved out and have just been connected to talk talk broadband today.  Both my ipad mini and iphone are saying they are connected to wifi but only my iphone will connect to online services where my ipad mini won't.  But if i disconnect my iphone from wifi then my ipad will work online and then when trying to connect my iphone back to wifi that won't work with online services.  is this because they are both using the same apple account?  though when i was living at home my mum had sky router and i was able to connect both devices with no problem.  is there anyway of connecting both devices so they work online at the same time??

    There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.

  • Can a single Access Point support both bridge mode and Access Point mode at the same time

    Hi Guys
    Does anyone know which access point can work in both bridge mode and AP mode ?
    Cheers

    Well what are you trying to cover. If its really a large outdoor area, then look at the mesh AP. Those require a WLC. Autonomous or stand alone ap can perform bridging on one radio and client access on another. You can also look at AP that support indoor mesh that also controlled by a wlc. If your putting APs outdoors, then look at the outdoor mesh.
    Thanks,
    Scott Fella
    Sent from my iPhone

  • Both thunderbolt display and ethernet stopped working at the same time

    I use recent Macbook pro 13inch retina.  I use both of thunderbolt ports on ethernet and display.
    I was messing around with application, and I found chess game. I played it for while than my display and ethernet suddenly stopped working.
    I do know ethernet and display is working fine because My roommate still have access to the ethernet, and My xbox still works on my display monitor.
    So, I suspected its thunderbolt problem, and I reinstalled Mavericks twice and reseted SMC and NVRAM, which didn't solve anything.
    Do you have any suggestion before I take this computer to Apple store?

    So the ports still work, and the display still lights up when you use it with your xbox? Are you sure about the xbox part, I didn't think the thunderbolt display worked with an xbox.
    https://discussions.apple.com/message/24060376#24060376
    Do you have the LED Cinema display? Look at the back, do you have 3 USB ports or 3 USB ports, firewire and ethernet?

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don't know how to set it up so the ipad does both.

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • Can I save both DVD-R and DVD-Video files onto the same DVD?

    Can I save both DVD-R and DVD-Video files onto the same DVD?

    Hi Stan,
    I just want the user to be able to run my video clips either on a 
    computer or on a standard DVD player. It would be nice to include both 
    formats on a single disc. I am new to this and am not sure what format 
    is most widely used for standard DVD players. Thanks for your response 
    and any guidance you can give me.
    Quinn
    Quoting Stan Jones <[email protected]>:
    Stan Jones http://forums.adobe.com/people/Stan+Jones created the discussion
    "Re: Can I save both DVD-R and DVD-Video files onto the same DVD?"
    To view the discussion, visit: 
    http://forums.adobe.com/message/4996961#4996961

  • How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    Thanks for digging out the facts.
    You have a 1st Generation Time Capsule.
    Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
    You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

  • [WIN7] Enable Microphone and "What U Hear" at the same time?

    Hey folks!
    I am trying to enable both at the same time on my Windows 7 in order to record Battlefield 2 and my own voice at the same time.
    Please do NOT start with "do this and that", I have tried everything for at least 1 year by now and the only way to make it work is to have microphone and "What U Hear" enabled. Apparently it is not possible. In order to activate one of both you have to make it "Default" record device but then the other device gets disabled. Trying to record the disabled device obviously ends up in silence.
    What is the reason for that and how to enable BOTH devices at the same time?
    I am using PAX Drivers which the maker always updates to the latest Creative Drivers. So I am up to date.
    Thank you a lot in advance.

    Thank you for your reply.
    Well, yes, the microphone is activated. And if I put the microphone playback volume to 100 I can hear myself talk even with "What U Hear" as my default recotding device. But once battlefield 2 starts it uses the default recording device for the in-game voice over IP. If I select "what U hear" as the default device it will basically put the game sound into the VOIP...
    What I tried was - set microphone as default device, launch BF2 so it registers the microphone as VOIP input, then alt tab out, select What U Hear as default device but it does not get activated! I only see a bar at the microphone.
    What I want is to be able to have TWO volume bars, in What U Hear AND Microphone so I can use the microphone for BF2 and What U Hear as gameplay-sound for my recording device.
    In Windows XP this was possible. In Windows 7 this is missing.
    The problem here is that once a recording device (the Default one usually) is being used by a program it BLOCKS the other recording devices.

  • How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.

    How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.

    You cannot do two different simultaneous VISA writes over a serial bus. There is a single rx line on the pc's com port and a single rx line on the instrument. You only hope is if the instrument allows you to chain commands and the reception of the carriage return triggers the instrument to implement both at the same time. Maybe you can send CTS01 and CTS02 separated by a space or comma. The manual should tell you if that's possible or maybe you need to ask the manufacturer.

  • Invoice and a credit memo at the same time

    Hello everybody,
    I have a question about the MIRO transaction; there is a provider that give us a monthly invoice where he put all the articles we have ordered, but ALSO those that we have returned the month before with a negative amount, instead of doing a credit memo, which is what the rest of providers do.
    I would want to know if it's possible to do an invoice and a credit memo at the same time, or at least do it separately but using the same barcode.
    Thanks in advance!
    Message was edited by:
            TERESA RIBAS

    Hi,
    Try the folowing,
    Enter the first PO, then click on the "more allocation criteria" icon to the right of the PO number field.
    Enter the remianing PO numbers that are to be invoiced AND the ones to be credited and leave the flags for  "deliveries" and "returns" both set on.
    This may work, and if you click on the help for one of these flags you will see that it does seem to do what you want.
    I haven't tried it (I don't have the data set up) but it is worth you spending a couple of minutes with some examples in your "play" client, just to see if it does what you want.
    Steve B

Maybe you are looking for