Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

Similar Messages

Importing new business systems into Integration Directory PI 7.1

Team SDN,
Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version). There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
Please share with members if wht are the new changes in PI 7.1 work proceses like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
Thanks SDN.

Hi Madhu,
If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
refer below link..
http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Raj

Business Service (vs) Business System in Integration Directory.

Hi to all,
I want to know the best practice for using Business Service and Business System, Then
When we should go for Business Service instead of Business System in Integration directory? Can any one give me suggestion for me .
Thanks,
Vikram.C.

Hi Vikram,
>>Business System: It represent a specific application System in the SLD.
Business Service: It represents an abstract service and are used in Cross Company Process.
>>When we should go for Business Service instead of Business System in Integration directory?
Its purely used in the Cross Company Process, i.e. whenever you are communicating with external system.
regards

No business system in integration directory error...urgent pl

Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
Thanks.

Hi,
make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
Did this fix the problem?
Regards,
Hans Christian

Not able to import business system in Integration Directory

Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar G

Hi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim...

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Assign Business System in Integration Directory

Hi all,
i have basic question.
in my ID, there are some configuration scenarios.
for example, the left side look like,
in case,one of Business System created on SLD was assigned to one of configuration scenarios,
i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
can i assign BS1 to several configuration scenarios?
or should i create Main scenario in order to define communication channel?
thanks in advance
venjamin

Hi venjamin
Yes, you can assign the same business system to different configuration scenarios.
to do this there are 2 ways.
1. Open the cofiguration scenario to which the business system has already been assigned.
Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
assign your business system.
2. Select the objects tab>service without party> business system> your business system> right click-->
assign to scenario and then select your scenario.
Hope this helps,
Regards,
bhavesh
Message was edited by: Bhavesh Kantilal

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

Idoc adapter - No service for a system in Integration directory

Hi,
I'm trying to send a custom IDOC from an R3 system to an XI instance.
All settings that I can see using transactions IDX1 IDX2 and IDX5 seems to be correct, but the IDOC doesn't reach the IS.
SM58 in the sender system reports the error:
"No service for system SAPXXX, client nnn in Integration Directory".
Do I have to create the service? How?
Thanks for any suggestion.
Simona

Hi Simona,
you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
Regards, Udo

I am unable to see business systems in ID

Hi Experts,
I have created Technical and business systems in SLD,
I have done mapping every thing working fine but when go to integration directory
i am unable assign business systems, i didn't find my busuiness systems in ID.
Can u please tell me where i have done wrong.
Thanks in addvance.
Manisha.

Hi Manisha,
There is a simple solution for this problem,
1. If you use the same business system to map more than one scenario U can't see the Business system in the ID directly.i.e., at assign business systems in ID.
2. Go to next tab which is Objects (ID) there you can see all the business systems which are using by XI server please do like this to get the business system.
3 select the business system which u want to work on- right click and select add to acenario(current ID scenario)
4. come out of that tab then u can see the business system added to the scenario. then rest is normal.
hope you understand
regards
praveen

Cannot see BI system in search

Hi experts,
I have configured BI backend system from CE portal and the connection test is successful. However, after I configured, I logged into VC and cannot find BI system I configured in "Search" drop-down list. I can only see Web service destination and RFC destination. What shall I do to solve it? Did I lose any step? I followed the configuration guide from here "http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm".
Best Regards
Tom

Hi Tom,
I have never made a connection to BI or any SAP System but a JDBC connection from the portal and did all the necessary steps, even though the test connection did not succeed, I could still see the system in VC.
In your steps, I do miss step 6 of the documentation, did you do this as well, may this is something which is required?
6.      Maintain the properties in the following categories:
○       BI/Business Intelligence
■       BI Directory Provider: yes
■       BI Master System: yes
One of the connected BI systems has to be the BI master system. If you are only connecting one BI system, choose Yes. If you are connecting more than one BI system, choose Yes for one system and No for the remaining system.
○       Connector
■       Group: Logon group of back-end system
■       Message Server: Message server of back-end system
■       Remote Host Type: 3
■       SAP Client: Client of back-end system
■       SAP System ID (SID): System ID of back-end system
■       System Type: SAP_BW
You can find the values for the logon group, system ID, and message server from the properties in the SAPGUI logon for the BI back-end system.
Best regards,
Dharmi

Creating business services in integration directory

Hi
When business services are created in integration directory - these business services are not tied back to entries in the SLD - i.e we can create entries for business services directly in integration directory without having to import them from SLD.
Now, when we migrate - from Dev environment to other landscapes - my understanding is that these business service entries are going to be migrated with the same names -and no transport target entries / validations is made during the target system import time - which happens in case of business systems having entries in SLD....
Could anybody out there - clarify these thoughts about business service entries
Thanks in advance - for your time .

Hi Karthik,
Check out these help file links, hope this will help you:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm</a>
http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/frameset.htm]
Regards,
Subhasha ranjan

Cannot Remove Business System

Hi,
I had created a Business System (BS_ABC_200) for different technical landscape for which we had assigned Client number 200 and logical client name also. After that the Business System was deleted by accident. Then i even deleted the technical system and created the technical system and also new Business System with different name.
Now, when i assign the new Business System in Configuration time, the Business System cannot be activated. The Error is "SAP System Id and Client name already existing with the service BS_ABC_200". Even though i had deleted in SLD.
If i create the Business system with same name "BS_ABC_200" then while assigning in configuration time i wont be able to see that Business System in the list.
How to overcome this issue, how can i delete BS_ABC_200 completely. Is there any runtime cache where i need to delete it.
Thanks,
Ramesh P

Hi,
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

No service for system in Integration Directory

Hi,
i already checked SDN and OSS Note 940313.
We want to send IDoc from System to XI. Therefore sender gets "No service for system SAPPSI, client 010 in Integration Directory"
Thats because IDoc-Adapteris not able to identify SAPPSI.
Well this Port does exist in IDX1.
In Integration Directory the Adapter-specifc identifier shows "PSI" and client "010".
So everything seems to work fine! Even the RFC-Destination has no errors!
The IDoc contains "SAPPSI" and the client "010" in the right fields, but we have no idea what causes the problem!
Does somebody can provide me with ideas on how to solve this issue?!
br

Hi to all.
Because i already did everything you mentioned i am kind of desperate.
Question concerning Sender-Information in IDoc-header.
There is send <SNDPOR>SAPPSI</SNDPOR>.
This port reference the one in IDX1?!
I am asking because we have a testsystem also sending IDoc's where everything works out. System is called ASI so the port is SAPASI. As i mentioned, this works!!!
In ID the Business Systems are called ASICLNT010 and PSICLNT010. The adapter specific Identifiers are saying:
For PSI
R/3 System ID: PSI
Client: 010
For ASI
R/3 System ID: ASI
Client: 010
So what the hell is the problem?!
br - thx to all!

XI Post Installation: Cannot see Business Service Test

Hello Everybody,
I have installed XI.
At the stage, Checking the Installation Part 2:
I have to create a new Business Service: Test
Save the service and then Activate the Change List.
I did all of that, but when I enter transaction SXI_CACHE on the ABAP side and then double click SERVICES, I cannot see the Server: Test .
Does anyone know why this Test Business Service does not appear ?
Also, I have not yet installed the SLD, can I have an XI system without an SLD ? If I want to install the SLD, can I do this as a separate step from SAPINST or can it only be done as part of the XI installation ?
Thanks,
Petr.

Hello,
I have checked in the Change List TAB and it is empty, if I change the search to include closed then I can see my Business Service.
When I open SXI_CACHE on the ABAP side the Services are empty and if I try to clear the SXI_CACHE with F6 or Shift-F6 I get this error:
Unable to refresh cache contents
Error during last attempted cache refresh
Error ID Business System
LCR_GET_OWN_BUSINESS_SYSTEM_SLD_API_EXCEPTION
Could this be caused be me not yet installing the SLD, and as I don't yet have an SLD I didn't to the SLD related parts of the XI post installation tasks ?
Thanks,
Petr.

Cannot see business system in integration directory.

Similar Messages

Maybe you are looking for