Cannot see created Web Service in Visual Composer Search

I am following the example of chapter 2 of the book"SAP Netweaver Composition Environment". I am trying to search for a web service that has been created, but I cannot find it.
I created a logical destination for the service, named EDMProjectDestination, using nwa->Configuration Management->Infrastructure->Destinations. This was OK, but when I try to search for it in the Visual Composer environment, it does not appear on the list after a refresh or even a system reboot.
Also, when I go back to the Web Services navigator, and try to search by Logical Destination, I am told that there are no logical destinations configured.
Can somebody please inform me what mey be missing here?
BR,
Tony.

Hi,
That did it, thanks!
This is a completely different location to that specified in the book.
BR,
Tony.

Similar Messages

Consume abap based web Service in Visual composer 7.0

Hi All,
Can any one provide me sample example or PDF on "consume abap based web Service in Visual 7.0 composer" not WSDL based
Help will be appricated by awarding point.
Thanks

Hi,
Try the below link.
Consuming WebService in Visual Composer-1
Hope it helps...
Regards
Basheer

Stored Procedure For Web Service in Visual Composer 7.1

Hello,
I want to use stored procedure for Webservice in Visual Composer 7.1
I can find this Web service but not supported. ( ex) prcreleased_test - Not supported )
Log.
Message: Error in connection - Can' t execute Web service.
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.processExecution:
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb
Log2
Message: Stopped further execution since the interpreter is unusable
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb '
Help me^^ plz..

Hi Tanna.
Thanks for your reply^^
I create webservice that access my stored procedure.
But not supported.
http://dmp.humaxdigital.com/HumaxCmdwService/Service1.asmx?wsdl
There are two service. (Hello World - Test, prcrelease_test - Stored Procedure )
'Hello World' is supported but prcrelease_test is not supported. I can't drag to storyboard.
Our company's DB is MSSQL2005.
please help me^^

Consuming Web service in Visual Composer

Hi All,
I have impoerted a z bapi in caf service .I create a web service out of this and try to consume this in Visual Composer .When i do Test data service by right clicking onthe web service and try to execute the web service i get an error saying that , web service could not be executed.
But if i do the same thing for the standard bapi , i get the results .
Could any one help me out.
As well as for some of the webservice (on exposing core services as web services),i try to execute in the wsnavigator ,i get error sayin that ,internal operation not mapped with the external service ,even though i have done the mapping in the caf.

divya,
You have to map your web service to the rfc in your destination systems
goto http://servername:50000/caf
Choose your Web Service from the External Services list,
on the right side choose your remote function calls and select the service then click map.
Regards,
Ahmed Salah

Query regarding calling web services in Visual Composer

Hi Experts,
I am thankful for your help for posting this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128
I am following the same steps but I am unable to find the system in visual composer after creating it in portal.
I got another document also related to it...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceea45f3-0c01-0010-049c-c2b001f590fb
But in this document when I am giving the WSDL URL name its not accepting. It is showing as invalid.So I am unable to proceed forward. Please help soon...
Regards
Nutan

Hi Nutan,
Try to define the web service system directly in the portal. Through VC you can encounter problems.
Regards,
Natty

Web Services in Visual Composer

Hi,
I've created several Web Services in the NWA under SOA Management > Destination Template Configuration.
I added the CurrencyConverter WS with no authentication [http://www.webservicex.net/CurrencyConvertor.asmx?WSDL]
I also added a WS from our ERP system (the URL from SOAMANAGER transaction in R3) with basic HTTP user authentication.
This is giving me the following error in VC when I try to load the services: Could not complete search, Check log for more information.
1) Where do I check this mystical log? If it's the one I can access under tools, I can't retrieve that either due to errors.
2) Without the log, any ideas why I'm not able to call web services?
Regards,
Frederik-Jan

Srinivasan,
Yes, all these settings had previously been checked and so forth. Everything is set up correctly according to whatever guides. SAP hasn't found anything bad with our systems either apparently. However we still get that Internal Server Error 500 each time we try to access the UDDI_DESTINATION ...
Even in Global Settings it's now set to bypass the Proxy at all times when accessing anything on our domain. It still gives the same error ...
New URL for those settings appears to be http://help.sap.com/saphelp_nwce10/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm by the way The one you gave is for the old NWA
Kind regards,
Frederik-jan

Create Web Service Option not available for BAPI Functional Module

Hello Experts
I am trying to create a web service from a standard BAPI functional module referring following document
http://help.sap.com/saphelp_nw04/Helpdata/EN/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
I am facing the same issue as mentioned in this thread (But for me answer is not OK)
Web Service Creation
When I click the FLIGHT Business Object and navigate to the Tools tab, I cannot see Create Web Service option.
Also when I try to start the web service wizard from (SE37 -> BAPI_FLIGHT_GETLIST) Utilities Menu, after specifying all the details, after clicking Finish, I get an error "Access Refused"
I verified the authorization to current user and gave him all the authorization required viz. (SAP_BC_WEBSERVICE_ADMIN, SAP_BC_WEBSERVICE_ADMIN_BIZ, SAP_BC_WEBSERVICE_CONSUMER etc) all 7 of them.
My system is ECC 6.0 700 Release
Thanks
Paresh

Hello,
For creating Web service definition, you have to be a registered developer. In SAP Service Market place, you will get developer access key. This should be entered in DEVACCESS table by creating any development object.
Thanks,
Venu

"invalid web service URL" error for create web service system

Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.

Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams

Creating web service system for Visual Composer

Hello,
I seem to have made some changes that made my unable to create web service systems for Visual Composer.
The change I made is in NetWeaver Administration > Configuration > Application Resources > WebServicesFactory, I added the Configuration Property "UseCacheByDefault" with Boolean value = true.
After this, if I create a web service system in Enterprise Portal, the Connection Tests fail. In Visual Composer when I define a web service system, the error I am getting is: "Connector Factory not found for value WebServicesFactory".
I have tried to delete the UseCacheByDefault property I added as well as restart the server but I am still getting the error.
However when I test my web service using the Web Services Navigator, I am not getting any problems. So my guess is the problem lies with the connection factory.
Can anyone help me with this issue?
Thanks.

Hello,
Since creating WS system in the portal resulted with failed connection test, the issue has nothing to do with VC.
I'm just guessing, but try to configure proxy in the J2EE engine.
If that doesn't help I suggest you raise this question in the portal forum.
Best regards,
Shay

Create BCS External Content Type or a list based on a WCF Web Service using Visual Studio

Hi ,
How to create a BCS External Content Type or a list Based on a WCF Web Service using Visual Studio.
The link provided here shows the requirement through Designer. http://msdn.microsoft.com/en-us/library/office/ee556431(v=office.14).aspx but I want this to be through VS code..
Please help ..Appreciate your help..
Thanks,
Satheesh

HI Sateeshlt,
You can see the below link also;
http://www.fabiangwilliams.com/2013/10/14/part-2-of-3-blog-update-on-sharepoint-bcs-with-full-crud/
Best Regards,
Brij K

Error creating web service from WSDL in 11.1.2.0.0

Hello,
I have just installed JDeveloper 11.1.2.0.0. I tried to test a web service created (and successfully tested) in 11.1.1.5.0. The service is deployed to internal WebLogic server but when I call "Test Web Service" this is the error I get:
The Web Service Tester cannot be invoked, because the WSDL document of the selected service cannot be read.
java.lang.IllegalStateException: SSLContextImpl is not initialized
     at com.sun.net.ssl.internal.ssl.SSLContextImpl.engineGetSocketFactory(SSLContextImpl.java:145)
     at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
     at oracle.jdevimpl.credential.LazySSLContextSpi.engineGetSocketFactory(LazySSLContextSpi.java:67)
     at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:398)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
     at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
     at java.lang.ThreadLocal.get(ThreadLocal.java:131)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
     at oracle.jdevimpl.webservices.tcpmonitor.ServiceTester$3.run(ServiceTester.java:262)
     at java.lang.Thread.run(Thread.java:662)
Then I tried to create a new project and Java web service from WSDL, but on the second step of the "Java Web Service from WSDL" wizard when I select WSDL file from the disk and click "Next" I get
java.lang.IllegalStateException: SSLContextImpl is not initialized
java.lang.IllegalStateException: SSLContextImpl is not initialized
     at com.sun.net.ssl.internal.ssl.SSLContextImpl.engineGetSocketFactory(SSLContextImpl.java:145)
     at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
     at oracle.jdevimpl.credential.LazySSLContextSpi.engineGetSocketFactory(LazySSLContextSpi.java:67)
     at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:398)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
     at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
     at java.lang.ThreadLocal.get(ThreadLocal.java:131)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDL(CachedWSDLReader.java:484)
     at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDL(CachedWSDLReader.java:455)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.fetchWSDL(SpecifyWsdlPanel.java:1050)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$1.run(SpecifyWsdlPanel.java:364)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:662)
I performed fresh install of this new JDeveloper version in new Middleware home with all the default options and this is the first thing I tried.
Any hints?
Thanks,
Bruno

Hi Vishal,
no, I don't see any HTTPS security settings defined. The thing is that this worked just fine in 11.1.1.5.0 version. I installed 11.1.2.0.0 and the first thing I tried was testing this web service. Right away I get this error. I also tried creating Web Service Client Proxy for this web service and I get the same exception. I looks to me that this happens when wizard tries parsing WSDL...
But, I got another error when I opened "Java Web Service Editor" for this web service and selected "Methods":
NPE in o.ji.webservices.wizard.jaxrpc.bottomup.SelectMethodsPanel:702
Performing action (35) Project Properties... [ from ProjectNavigatorWindow ] [ for ( VegaService.jpr, VegaService.jpr, DMSVegaAdapter.jws ) ]
oracle.jdevimpl.webservices.index:Jun 9, 2011 9:05:02 AM IndexFacade runQuery
INFO: Having to guess workspace
oracle.jdevimpl.webservices.index:Jun 9, 2011 9:05:28 AM IndexFacade runQuery
INFO: Having to guess workspace
Performing action (23) Find... [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (25) Find Next [ from CodeEditor ] [ for ( VegaService.wsdl, VegaService.jpr, DMSVegaAdapter.jws ) ]
Performing action (56) Properties... [ from ProjectNavigatorWindow ] [ for ( VegaService, VegaService.jpr, DMSVegaAdapter.jws ) ]
oracle.jdevimpl.webservices.index:Jun 9, 2011 9:09:32 AM IndexFacade runQuery
INFO: Having to guess workspace
java.lang.NullPointerException
java.lang.NullPointerException
o.ji.webservices.wizard.jaxrpc.bottomup.SelectMethodsPanel.populateListImpl(SelectMethodsPanel.java:702)
o.ji.webservices.wizard.jaxrpc.bottomup.SelectMethodsPanel.access$600(SelectMethodsPanel.java:82)
o.ji.webservices.wizard.jaxrpc.bottomup.SelectMethodsPanel$4$1.run(SelectMethodsPanel.java:603)
j.a.event.InvocationEvent.dispatch(InvocationEvent.java:209)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:642)
j.a.EventQueue.access$000(EventQueue.java:85)
j.a.EventQueue$1.run(EventQueue.java:603)
j.a.EventQueue$1.run(EventQueue.java:601)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:612)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
j.a.Dialog$1.run(Dialog.java:1046)
j.a.Dialog$3.run(Dialog.java:1098)
j.security.AccessController.doPrivileged(Native Method)
j.a.Dialog.show(Dialog.java:1096)
j.a.Component.show(Component.java:1585)
j.a.Component.setVisible(Component.java:1537)
j.a.Window.setVisible(Window.java:842)
j.a.Dialog.setVisible(Dialog.java:986)
o.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
o.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
o.i.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
o.i.panels.TDialogLauncher.showDialog(TDialogLauncher.java:225)
o.ji.webservices.wizard.jaxrpc.WebServicesEditor.showDialog(WebServicesEditor.java:313)
o.ji.webservices.WebServicesAddin.findAndInvokeWizard(WebServicesAddin.java:1672)
o.ji.webservices.WebServicesAddin.handleEvent(WebServicesAddin.java:870)
o.i.controller.IdeAction$ControllerDelegatingController.handleEvent(IdeAction.java:1469)
o.i.controller.IdeAction.performAction(IdeAction.java:662)
o.i.controller.IdeAction.actionPerformedImpl(IdeAction.java:1140)
o.i.controller.IdeAction.actionPerformed(IdeAction.java:617)
jx.s.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
jx.s.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
jx.s.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
jx.s.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
jx.s.AbstractButton.doClick(AbstractButton.java:357)
jx.s.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
jx.s.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
j.a.Component.processMouseEvent(Component.java:6289)
jx.s.JComponent.processMouseEvent(JComponent.java:3267)
j.a.Component.processEvent(Component.java:6054)
j.a.Container.processEvent(Container.java:2041)
j.a.Component.dispatchEventImpl(Component.java:4652)
j.a.Container.dispatchEventImpl(Container.java:2099)
j.a.Component.dispatchEvent(Component.java:4482)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4238)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4168)
j.a.Container.dispatchEventImpl(Container.java:2085)
j.a.Window.dispatchEventImpl(Window.java:2478)
j.a.Component.dispatchEvent(Component.java:4482)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:644)
j.a.EventQueue.access$000(EventQueue.java:85)
j.a.EventQueue$1.run(EventQueue.java:603)
j.a.EventQueue$1.run(EventQueue.java:601)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
j.a.EventQueue$2.run(EventQueue.java:617)
j.a.EventQueue$2.run(EventQueue.java:615)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:614)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)
Regards,
Bruno

Problems with creating web service system

Hello,
I seem to have made some changes that made my unable to create web service systems for EP or Visual Composer.
The change I made is in NetWeaver Administration > Configuration > Application Resources > WebServicesFactory, I added the Configuration Property "UseCacheByDefault" with Boolean value = true.
After this, if I create a web service system in Enterprise Portal, the Connection Tests fail. In Visual Composer when I define a web service system, the error I am getting is: "Connector Factory not found for value WebServicesFactory".
I have tried to delete the UseCacheByDefault property I added as well as restart the server but I am still getting the error.
However when I test my web service using the Web Services Navigator, I am not getting any problems. So my guess is the problem lies with the connection factory.
Can anyone help me with this issue?
Thanks.

Hello,
Since creating WS system in the portal resulted with failed connection test, the issue has nothing to do with VC.
I'm just guessing, but try to configure proxy in the J2EE engine.
If that doesn't help I suggest you raise this question in the portal forum.
Best regards,
Shay

How to create Web Service based on PI WSDL message

Hi all,
we have following scenario:
Within PI (version 7.1) we set up a message type and inbound service interface. This service interface should send the PI message to a web service running on a SAP J2EE (version 7.01). As the PI message is sent as WSDL I thought it should be easy to build a web service on the SAP J2EE based on this WSDL from PI.
Unfortunately, I have problems creating the Web Service.
For my current project we integrated the NWDI to the SAP NetWeaver Developer Studio and I'm required to add the Web Service to an existing DC (Development Component) within the NWDI.
What I tried so far is:
- I created a Deployable Proxy Project and within this I created a Client Proxy Definition based on the WSDL from the PI. But I can't add this Proxy to the DCs of the NWDI and I don't know how to implement my own coding here in order execute specific functions.
- I created a new class within the NWDI DC and a public method. Based on this I created a Virtual Interface and a Web Service Definition (WSD). Then I added this to a Web Service Deployment Descriptor. I uploaded this to the SAP J2EE. But I'm not able to access this and I don't know hoe to assign the WSDL here.
I also tried here to create a client proxy based on this WSD as I thought I might assign the WSDL here. But I don't see the WSD in the list of Web Services uploaded to the SAP J2EE...
Can you please advice me how to create a Web Service in such an environment?
regards
René Jurmann

Hi Tahir,
sorry that you needed to wait this long - but this is how I created the web service:
The steps on how to create the web service in NetWeaver Developer studio are nearly the same as described in the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5838. [original link is broken] [original link is broken] [original link is broken]
Some steps I just skipped and some others I added. Some of the steps I did the way I described it as I needed to connect the web service with the SAP PI.
Prerequisites:
Add Java Perspective and J2EE Development Perspective to the open perspectives.
Within "Window - Preferences - Web Services" check "Soap extensions visible in the virtual interface editor"
The SDM of the corresponding SAP J2EE is configured within "Window - Preferences"
Create a Development Component (DC) with type "J2EE -> EJB Module"
The business logic of the web service will be implemented in an Enterprise Java Bean (EJB). So first the EJB component must be created:
     Choose "File -> New -> Other"
     In opening PopUp choose "Development Component -> Development Component Project"
     Select the Software Component for which you want to add the DC (e.g. "Local Development -> MyComponents")
     Choose now vendor, name and type:
          vendor is an alpha-numeric string of 20 characters starting with a letter - all in lower case
          name is an alpha-numeric string starting with a letter - all in lower case
          vendor and name concatenated must not be longer then 40 characters
          the name can be separated into different part using "/" as separator
          each part of the name must not be longer than 8 characters
          the type is "J2EE - EJB Module"
          you can specify a Caption as general description for the web service
Create new EJB
To create the EJB itself:
     In J2EE DC Explorer of J2EE Development Perspective expand new DC and right-click on folder "ejbModule"
     Choose "New - EJB" with following details:
          EJB Name: <name as for PI service Interface to be created - starting in upper case>
          EJB Project: <pre selected>
          Bean Type: Stateless Session Bean
          Default EJB Package: <corresponds to namespace in PI>
          generate default interfaces: Checked
Regarding the "Default EJB Package" this should be created according the namespace in PI for which all PI objects will be created. This only applies if you have some naming conventions here.
Example:
Namespace in PI is: http://company.net/pi/SOFTWARE_COMP/Application
The corresponding package then is: net.company.pi.software_comp.application
Implement coding for web service
As the web service will be called via PI some transfer variables will be submitted. Most likely, those variables will not be standard type (e.g. String) but a complex type. Those types must be generated as Java classes. Below an example of a complex type I needed:
Data Type
net.company.pi.software_comp.application.types.MessageProcessingInformation
Structure:
     Element name          Element type
     sendingSystemID          String
     interfaceID               String
     businessProcessVariantCode     String
     testIndicator               Boolean
For every element described a public "get", "set" and "has" method must be created in the corresponding Java class:
package net.company.pi.software_comp.application.types;
import java.io.Serializable;
public class MessageProcessingInformation implements Serializable {
     protected String sendingSystemID;
     protected String interfaceID;
     protected String businessProcessVariantCode;
     protected Boolean testIndicator;
     public String getSendingSystemID() {
          return sendingSystemID;
     public void setSendingSystemID(String value) {
          this.sendingSystemID = value;
     public boolean hasSendingSystemID() {
          if(sendingSystemID != null && !sendingSystemID.equals("")){
               return true;
          return false;
All Java classes representing complex types and all classes referenced here (used for sub-types) must implement java.io.Serializable. Java standard types which do not implement this class must not be used as sub-types.
As soon as all data types are declared the real business logic can be implemented:
     In J2EE DC Explorer of J2EE Development Perspective expand DC - "ejb-jar.xml" - <Name> and double click on "ejbCreate"
     In detail view select folder "Business Methods" and click "Add"
     choose name of business method - this should be the same as the PI message type used for the service interface - starting lower case
     return type should be "void"
     add needed parameters fully qualified - including package (as specified in PI and created previously in DC)
     you can mark certain parameters as array if necessary
Remark:
It might be that after saving you get an error. This might be as the package name of one component is copied to the corresponding Java class at the very beginning (before the package declaration within the Java class). Simply delete the string here.
It also might be, that the new business method is only defined in the remote interface class but not in the bean class. Just create an according method in the bean class.
Within the newly created business method within the bean class you can now implement the business logic.
Create a DC with type "J2EE -> Enterprise Application"
In order to create the "real" web service and deploy it to the J2EE an Enterprise Application project has to be created. So create a new DC as for the EJB Module but choose as type "J2EE -> Enterprise Application".
After the DC is created right click on the EJB DC and choose "Add to EAR Project". Choose the new DC.
Create web service for EJB
As soon as you implemented the business logic you can create the "real" web service. Therefore:
     Right click on the EJB name below "ejb-jar.xml"
     Choose "New - Web Service"
     Choose proper "Web Service Name" and "Configuration Name" (probably oriented at the EJB name)
     Copy the URL of the web service - you'll need it later for PI configuration
     on the second next screen use the same name for "Virtual Interface" and "Web Service Definition" (the name should be the name of the "Endpoint")
     the "EAR Project" should be preselected
Unfortunately, the web service can't be used in its current configuration to be accessed by PI. Therefore the Virtual Interface must be changed. To do so, expand folder "Virtual Interfaces" and double click the virtual interface created.
Within the detail view expand in tabs "Mapping" and "Types" the complete folder structure. For any "SOAP Extension" where a namespace can be defined use as namespace the corresponding namespace in PI (e.g. http://corpintra.net/pi/CBFC_GLOBAL_SAP_APPL/BillerDirect) but do not change any "Soap Extension" of a standard Java type. (if you don't have any naming convetions for namespaces in PI you can leave the SOAP Extension here. But then the namespace in PI should be set accordingly.)
Probably it can be necessary on top level "Soap Extensions" in tab "Mapping" to leave "Use Namespaces for Parameters" unchecked. For some of my web services this parameter must be checked for others not - just try.
If you can define a "New Name", "Local Name" or "Item Label" for a Soap Extension then use a name with starting upper case letter. (For Java Naming conventions most of the data type names will start with lower case letters.) Especially the method name must be renamed this way in order to stick to the PI namings.
As a last point to change here check in tab "Mapping" all "Incoming Parameters" which you specified as array. Use for those as "New Name" a different name - do not just simply change from lower case to upper case. This is necessary as on PI we need to create two levels although here only one is specified.
For any own sub-type declared as array the name within the coding should also differ from the corresponding Java Class name the type refers to.
If all this is done you can deploy the web service to the J2EE:
     right click on "Enterprise Application" DC and choose "Development Component - Build..." and build all corresponding components
     right click on "Enterprise Application" DC and choose "Development Component - Deploy"
Test the new web service via <J2EE URL>/wsnavigator/enterwsdl.html
Create PI interface
After the web service is created successfully the PI integration can be started.
Therefore, within the Enterprise Services Builder create a data type according to the web service definition. All components defined on top-level for this data type should be declared as incoming parameter for the web service business method. Therefore it could be necessary to create some sub data types on PI first and add those to the "master" data type.
Ensure that the names of the components correspond to the names defined in the web service (see virtual interface here). Those names must exactly be the same - including lower/upper case. Also take care for the ordering of the components.
In case you need to include arrays following applies:
The upper level is of occurrence "1:1". This has only one sub-entry with occurrence "1:n". The names for upper and sub-level must not equal.
Based on the data type a message type is created. The name of the message type must be exactly the same as the name of the web service business method. (Hint: the name of the web service business method was most likely changed in the virtual interface. Then this name must correspond to the message type name.) Based on the message type an asynchronous inbound interface is to be created (which will be referred in the Integration Directory). The operation name for this interface (left panel) should be the same as the name for the web service business method.
Create PI mappings and routings
How to map (message mapping and operation mapping) from source to the web service message I wont explain here as this depends on the source message. The only important things here are:
     When creating the SOAP communication channel within the Integration Builder the "Target URL" is:
          <J2EE URL>/<Access URL as specified in web service creation>?wsdl&style=document
     The soap action is the name of the web service business method.
     Most likely the web service needs authentication to be executed.

Error while creating web service reference

Hi,
I have very limited knowledge of web services. we have a BPEL implementation and I have been handed location to 3 wsdl files for which I am trying to create a web service reference(under shared component->logic) in apex(3.1.1). I am successfully able to create for 1 wsdl but for other two i get the below error.
"1 error has occurred
The WSDL document contains multiple SOAP bindings. Application Express only supports WSDL's with one SOAP binding. Click Create Web Service Reference Manually to continue creating a reference for this service."
looking at the working and not working wsdls, i see the following difference. i collapsed all the xml tags in the wsdl file and found that the one that is not working and giving above error has the below two tags twice with data in it.
<wsdl:portType name=
<wsdl:binding name=
any help to parse this wsdl in APEX be greatly appreciated.
thanks,
khan

I have just read that " APEX does not support multiple binding web services currently" at http://oraclebizint.wordpress.com/category/apex/
..still reading it. though the post is dated back in 2008, I wonder why this functionality wasn't added to Apex.

Validation error while creating Web Service Proxy.

Hi,
I'm trying to create Web Service Proxy. But I'm stuck with a Validation error
model error: type
+"{http://xmlns.oracle.com/2001/XMLSchema/DOM}+
+org.w3c.dom.Document" not found.+
I'm using "Create Web Service Proxy" wizard. There are 6 steps in creating proxy through JDev. wizard.
First step itself displaying the above validation error when I click on "Next" button.
Few points
We have created web service using "oracle.j2ee.ws.StatelessJavaRpcWebService" servlet
Thanks in advance.
-Sukumar

Hi,
It might be that the .net service which you have is not WS-I compliant. Can you first run WS-I Analyzer on the wsdl to see it the test passes.
Thanks,
Vishal

Cannot see created Web Service in Visual Composer Search

Similar Messages

Maybe you are looking for