Cannot see essbase application in shared serivce after upgradation

hi i am trying to upgrade hyperion 11.1.2.1 to 11.1.2.3 with maintenance release . after the configuration with previous database and starting all the serives, when i loging to shared service i cannot see my application in essbase cluster 1 . i tried to register option in the essbase but it say registration is not allowed.

Is it just one application you cannot, can you see other ones from the previous release.
What happens if you create a new application
Check the essbase logs and the SharedServices_Security_Client log - Installation and Configuration Troubleshooting Guide
Cheers
John

Similar Messages

I cannot see my family's shared content

I have done everything apple instructed me to do about setting up family sharing. Unfortunately, I still cannot see my family's shared content under purchases. I could not even see their names. However, on their devices, they can see me and they can see my purchases.

Hello Anna,
Thank you for using Apple Support Communities.
This article would be the first one I would check out for problems seeing your family's shared content.
If you don't see your family's shared content - Apple Support
Regards,
Jeff D.

Cannot see transported items in Queue, even after releasing them.

I cannot see transported items in Queue, even after releasing them. When Iam in transaction: SE09, I am able to see all the released objects, and the check marks next to each one which looks good...Where are these files? Under usr/sap/trans, they show up under logs with nothing in them except log data...Not in Cofiles & datafiles either.
Any input would be greatly appreciated.
Alan

Hello Jazz!
Our developer released them, and I will get more details from him. We can see them when in SE09/10. Just cannot see them in the import queue? Also can't find the files under: usr/sap/trans, except the logs???
We just want to find these files, and either zip them up, or put them on a CD for later use, and this project will wind down soon.
Any other suggestions on how we can find these files, as all exports normally show up in usr/sap/trans/data, and cofiles...but not in this case???.
Thanks Again,
Alan

TS1369 Why i cannot see Ipod icon into my laptop after i connected to my laptop with usb cable

Why i cannot see ipod icon into my laptop after iconnected to my laptop

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.
Otherwise:
iOS: Device not recognized in iTunes for Windows

Cannot see my text or the cursor after installing pages...

Cannot see my text or the cursor after installing pages...

At a guess you have simply chosen a blank Layout mode template.
Blank Layout templates have absolutely nothing on them, you have to add your own textboxes.
Choose a Word Processing template, they are listed in the Template Chooser sidebar.
Peter

HT201365 I cannot open/click my iCloud (iphone 4s) after upgrading to ios 7.0.6... How can I fix it?

I cannot open/click my iCloud (iphone 4s) after upgrading to ios 7.0.6... How can I fix it?

Hey AU Nicasio,
Thanks for the question. If the iCloud tab (and other tabs) are greyed out, and you are unable to tap on them, it sounds like Restrictions have been enabled on your device. Specifically, the Restriction titled “Allow Changes: Accounts”.
For more information, see this resource:
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
Thanks,
Matt M.

Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5

Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5. It used to be at Alt-ß. Anyone can help please ?

Never mind. Found it in an old post. It is mapped at Shift-Alt-7, really weird.
The post is at:
http://www.innoq.com/blog/st/2003/12/backslash_on_mac_os_x.html

Cannot locate wireless Airport hubs in Airfoil after upgrading modem and router?

Cannot locate wireless Airport hubs in Airfoil after upgrading modem and router? Just replaced modem and router-Airport is working for internet connection, but I cannot locate the two additional sites in my home to feed music to. Each is connected with a Apple wireless hub. Thanks

To work in this configuration, you just need to setup the AX as a bridge.
To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new setting.

I cannot access iphoto to include an attachment after upgrading to Mavricks

I cannot access iphoto to include an attachment after upgrading to Mavricks but the picutures are all there in iphoto.
Please help!

You don't have this feature in your new mail window
where you can drag and drop the picture of your choice into the email window?
OT

Cannot start Essbase application

Hi-
We could not start our Essbase application after stopping and starting Essbase services. This issue happens randomly, usually when big calcs are running and getting interrupted by the nightly backup process. We are killing all processes and logging off users before stopping the services, however we still seem to be running into "Cannot load application..." error depicted below when trying to start the services back up.. Any suggestions are greatly appreciated. Is there any better way to get rid of any hung processes besides "alter system kill request all;" command? Thank you in advance..
MAXL> alter system logout session all;
OK/INFO - 1013220 - Supervisor [essbaseadmin] has forced user [JohnSmith] to logout.
OK/INFO - 1051037 - Logging out user [a350199], active for 68 minutes.
OK/INFO - 1013220 - Supervisor [essbaseadmin] has forced user [essbaseadmin] to logout.
OK/INFO - 1051037 - Logging out user [essbaseadmin], active for 243 minutes.
ERROR - 1013291 - Failed to logout user [essbaseadmin]: user has requests running.
essmsh timestamp: Wed Mar 18 20:00:03 2009
MAXL> alter system kill request all;
OK/INFO - 1056090 - System altered.
essmsh timestamp: Wed Mar 18 20:00:04 2009
MAXL> alter application MYAPP disable connects;
OK/INFO - 1056013 - Application MYAPP altered.
essmsh timestamp: Wed Mar 18 20:00:04 2009
MAXL> logout;
User essbaseadmin is logged out
essmsh timestamp: Wed Mar 18 20:00:04 2009
/*--stop essbase services now******/
------- ESSBASE.LOG ------------------------------
[Wed Mar 18 20:10:04 2009]Local/ESSBASE0///Error(1013018)
Cannot unload database [MYAPP] while user [essbaseadmin] is performing database operation. Wait for the user to complete the operation, or ask the user to abort it. Log out all users and then unload the database.
/*--start essbase services******/
[Wed Mar 18 20:13:03 2009]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Wed Mar 18 20:13:03 2009]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Wed Mar 18 20:13:05 2009]Local/ESSBASE0///Info(1051199)
Single Sign-On Initialization Succeeded !
[Wed Mar 18 20:13:05 2009]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Wed Mar 18 20:13:09 2009]Local/ESSBASE0///Error(1002097)
Unable to load database [MYAPP]
[Wed Mar 18 20:13:09 2009]Local/ESSBASE0///Error(1052001)
Error reading from server
[Wed Mar 18 20:13:09 2009]Local/ESSBASE0///Error(1052001)
Error reading from server
[Wed Mar 18 20:13:09 2009]Local/ESSBASE0///Error(1054001)
Cannot load application MYAPP with error number [1002097] - see server log file

Please be careful.
When you kill a calc script, it can damage your app/db.
I would suggest to make sure that your calc script finish before your backup run, or run after the backup finish.
Zaky

Satellite M70-340: I cannot see the DVD schort cut menu after reinstallation

Hi,
I just recently bought Toshiba M70-340 2 weeks ago. Now I learn that there is better Toshiba comparing the my one.
My question is I cannot see on the screen the DVD schort cut menu. First time when I opened it it was on the rıght handside
of screen and my machine was Turkish Win XP Home edition. Than I reformat and change into English version of WinXP that comes with in Toshiba recovery CD. But I lost the screen menu for DVD I guess. Now ı don't know how to re-install that option.
Plus my machine is use the Intel Centrino 1.7 but I am not sure if this is a dual proccess. Secondly the ram is 512MB and I am trying to buy 2GB extened ram but seems still very very expensive (around $1100) Why is that 2GB ram so expensive?
I am using my laptop for software engineering as well as using Macromedia flash and Adobe Photoshop.
The both application and MS VS.NET 2005 as well as SQL Server 2000 and SQL Server 2005 application are very slow and sometime it takes more than 30
min. to compile or open it.
I have my home PC P4 3.2G with 1GB ram and it's faster than my Toshibe laptop.
Please be patien with me, after a 5 years later I bought my second laptop and first one was notebook from another manufacture.
I search in the internet and I find the M70-340 with Turkish Q type keyboard was the best option and it cost me $1450.
All I need how to overcome my problem and I need someone from Toshiba to explained to me carefully.
Can someone read my post and answer my question and worries?
I thank you very much and I looking forward to receive some help.
Kind Regards,
NTMS2006

Hello
I dont want to disappoint you but please dont expect someone from Toshiba will write to you because this is user-to-user forum. I will try to write some comments because I have the same unit as you.
This DVD shortcut is really not understandable for me and I really dont know what you are writing about. If the DVD drive is recognized and installed properly it should be listed in device manager and also shown in Windows explorer. If you want to discus about it please describe exact status of DVD drive in device manager and Windows explorer.
You are right about memory. This notebook is delivered with 512 MB Ram. According the notebook specification it can handle max with 2GB of Ram and if you want to use max please use 2x1GB module. Compatible one is DDR2-400/533 1GB (PA3411U-1M1G).
2GB modules are the newest and everything new is very expensive. I dont know how much it can costs but definitely not around $1100. For this money you can buy the whole notebook.
The list of used software is impressive and I am not wondering if the notebook runs slow. Upgrade it to max Ram and it will be much faster. Please dont compare your desktop with this mobile unit.
Pick up info how much costs PA3411U-1M1G memory module and use two of them for max RAM. You will see that unit will run faster and I hope you will be satisfied with performance.
Have a nice day!

Cannot see more than one shared virtual disk at a time

I have multiple virtual disks configured and as I add them to the specific virtual machine im using it modifies the vm.cfg as follows:
disk = ['file:/OVS/running_pool/110_openfiler/System.img,hda,w',
',hdc:cdrom,r',
'file:/OVS/sharedDisk/openfiler-ocs-u01.img,hdd,w!',
'file:/OVS/sharedDisk/openfiler-ocs-u02.img,hde,w!',
'file:/OVS/sharedDisk/openfiler-SAN-test.img,hdf,w!',
when the machine boots up the contents of /dev only contains the shared drive hdd, thus I cannot see hde or hdf.
One thing I tried was to edit the vm.cfg after adding the shared drives to the machine to mimic:
disk = ['file:/OVS/running_pool/110_openfiler/System.img,hda,w',
',hdc:cdrom,r',
'file:/OVS/sharedDisk/openfiler-ocs-u01.img,sda,w!',
'file:/OVS/sharedDisk/openfiler-ocs-u02.img,sdb,w!',
'file:/OVS/sharedDisk/openfiler-SAN-test.img,sdc,w!',
This allows me to see all three drives when I issue fdisk -l
Disk /dev/hda: 105.2 GB, 105226698752 bytes
255 heads, 63 sectors/track, 12793 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 13 104391 83 Linux
/dev/hda2 14 12539 100615095 83 Linux
/dev/hda3 12540 12793 2040255 82 Linux swap / Solaris
Disk /dev/sda: 20.9 GB, 20971520512 bytes
255 heads, 63 sectors/track, 2549 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 2550 20480000 ee EFI GPT
Disk /dev/sdb: 20.9 GB, 20972569088 bytes
255 heads, 63 sectors/track, 2549 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 2550 20481024 ee EFI GPT
Disk /dev/sdc: 104.8 GB, 104857600512 bytes
255 heads, 63 sectors/track, 12748 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 12749 102400000 ee EFI GPT
but then my question becomes... could this cause any potential problems?

I found that there are 4 IDE disks and 7 SCSI disks at most for HVM guest on Oracle VM 2.1 version. For IDE disks, The available disknames are from hda to hdd; and for SCSI disks, are from sda to sdg. you may make test about it. :)
Message was edited by:
Changhai

Migrating essbase application through shared services

Hi All,I want to migrate my essbase application (11.1.2.2) from dev to prod.
please suggest me the steps to migrate

This is a question that has been asked many times and with a little research you will have all the info you need.
As you mention Shared Services I take it you are wanting to use LCM, if so then it should be pretty easy and just read through - About Lifecycle Management
Or have a look at First-Time Lifecycle Management Migration for Essbase 11.1.1 with Shared Services Lifecycle Management 11.1.1 it is based on an older version but you get the idea.
You can even go to your favourite internet search engine and type LCM essbase and you should get lots of information to look through.
Alternatively you could user the EAS migration wizard - Migration Wizard and then you will need to export/import the data either through EAS or Maxl.
Cheers
John

Cannot see the application window when the program is run

I wrote a java GUI using Jbuilder. I cant see the application window when i run the program. THe program compiles successfully but the application window pops up only showing the blue title bar and minimize maximaize and x out icon on it. I done see my GUI or anything below the 1 inch long blue title bar. Can someone plese tell me what i am doing wrong. Thanks.

A quick look-up in the API confirms that pack is not deprecated. Setting the size of the window to a specific size is quite a bit different than what pack accomplishes. Pack determines the preferred size of all of the components, lays out the layout manager and then sets the size of the window based on the size of the components inside of it. Calling setSize, however, will force the window to be a specific size no matter what the components want and thus creates a window that is probably not the right size for the components inside of it.

Can not edit file on network shared folder after upgrading to windows 7

Merry Christmas and happy new year,
Due to some configuration changes on a specific application, I have forced to upgrade OS of a few number of workstations from Windows XP to windows 7. After upgrading I am facing a strange problem on WIN7 workstations. These workstation are member of a Windows
2008 R2 Active Directory domain which also has a Windows 2003 advanced server additional domain controller. Also there are a number of shared folders on some member servers (all windows 2003) which are mapped as network drives at user logon. Before upgrading
mentioned workstations to WIN7, users was able to edit his/her files on all of mapped network drive according to his/her permissions without any problem on their WINXP workstations, But after installing windows 7 they begin facing problem on one of these mapped
network drives and the problem exactly is when they edit a file, in more specific word an excel file, and then try to save, the excel returns an error message of "document not saved" and exit the excel program. It becomes more strange when you learn
that the edited excel file is disappeared and replace with some "tmp" file. If user copy the excel file to his/her own desktop, edit it and then copy it back to its original place on mapped network drive, it will be replaced normally with its older
version. In other words if user wants to edit an excel file on that specific network drive, he/she must edits it somewhere else and then replace it on the network drive. If the same user uses a WINXP box, there will be no problem.
Can anybody help me to fix the issue?
TIA
Bijan

Thank you Karen,
The problem is fixed, but my case was none of what you suggested. In fact I have
another problem which I described in another question and it was of the root of this excel file issue. I describe what I have done to fix the latter problem hope to help fixing similar issues to mine.
Okay, as it is described in the
question, I was not able to open a shared folder with its UNC address while it could be mapped as a network drive without any problem. I examined what I was replied and some other ways, came to no result. I decided investigate a similar shared folder in
permissions to problematic one to see if the problem is repeated. So I created a folder and shared it with similar permissions and examined it. Surprisingly there was no problem. It was wise to remove sharing of the problematic folder and share it again to
see if the problem resist. But when I tried to remove sharing I received an error message saying that
the shared folder is related to a DFS root. When I took a look at the DFS roots of domain there was no sign of the problematic folder (that made me recall that I created a DFS root with problematic folder mistakenly and removed that DFS root).
After little searching, I found out that the problem could be caused by traces of the removed DFS root. Yep! I found the suspect! The registry key
HKLM\Software\Microsoft\DFS\Domain\problematic shared folder. I removed the key restarted DFS service and log off and on and Bingo!
This problem pops up a few more questions:
1) Why is not the registry key related to removed DFS root deleted from the registry of windows 2003 server?
2) Why was I able to browse this ex-DFS root shared folder without any problem in windows XP while it was problematic in windows 7?
3) As there is no special client service for DFS and user can access DFS root targets like other shared folders what is the deference between shared resource access mechanisms in windows XP and windows 7 that caused the problem?
Bests,
Bijan

Cannot see essbase application in shared serivce after upgradation

Similar Messages

Maybe you are looking for