Cannot see fields of MCVBAK in LBWE

Hi
I have enhanced communication structure MCVBAK with custom appends.
However, when I tried to bring this fields into Extract structure MC110VAHDR from LBWE, I cannot see the enhanced fields.
Has anyone faced this problem?
Regards
Venkat

Hi Venkat
IS it apperaing in the SE11.
If not just activate them and relog in to them system and check it mean while
make sure this should be in transport request..and make sure of component type
it should be similar to the table component type.
Hope itz Helps..!
Regards
R M K
**Winners don't do different things,They do things differently...!**
> Hi
>
> I have enhanced communication structure MCVBAK with
> custom appends.
> However, when I tried to bring this fields into
> Extract structure MC110VAHDR from LBWE, I cannot see
> the enhanced fields.
>
> Has anyone faced this problem?
>
> Regards
>
> Venkat

Similar Messages

Cannot see fields in datasource after creating user exit

Hi,
I have created a view from table and then created a generic datasource from this view. aftre that i appended the extract structure with my key figures (3 fileds) and then populated it by user exit. Now i can see that data is being extracted by user exit( in debug mode), but i dont see the fields in the datasource.
What am i doing wrong,
Please help.
Thanks

Hi Raj,
In case the previous post did not work check whether you have the entries for the fields (newly added) in the table ROOSFIELD for your datasource.
You may need to write a small ABAP program to resolve your issue:
To resolve your poblem you would need to write a small ABAP program:
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'X' where
OLTPSOURCE = '<your datasource name>' and
FIELD = '<field which is hidden/missing>'.
Execute the program for each of the field and check the entries in RSO2.
Bye
Dinesh

Cannot See fields on Adobe 8.0 that were created in 6.0

I had a file sent to me that was created with adobe 6.0. The file has fields filled in, but when I open it in 8.0 they do not show up. I verified that they were in fact filled in, and saved and then emailed.
All windows xp.

I have a client who recently experienced what appeared to be a permissions issue when, after editing some PDF/A files that we provided to her using Adobe Acrobat XI Pro 11.0.07 (on a Mac workstation running OS X 10.7.5), she tried saving them to a server (running Mac OS X 10.8.1) where she had stored our PDF/A files, attempting to overwrite the original PDF/A files. She was able to successfully save the edited PDF files to her Desktop, but when she tried dragging/dropping the edited PDF files from her Desktop to the server, attempting to overwrite the original PDF/A files, again she was presented with a permissions error. I read another thread here saying that there could potentially be some issue with Apple/Mac Mail holding on to files that were sent as attachments, but she validated none of the PDF/A or edited PDF files were e-mailed, so I wanted to survey the community to find out what you all think may have happened. The original PDF/A files that we provided to her were created on a system running Windows Server 2003 and Windows XP. For the record, I'm a bit of a novice when it comes to understanding all of the intricacies of PDF/A files AND Macintosh operating systems/applications.

Cannot see form fields on EBay and Ad trader sites

cannot see form fields on EBay and Ad trader sites. when asked to fill a form with item details the boxes that you have to fill in are missing. using Firefox 3.6.2. i have contacted Ad trader with the question but have got no replies.
i have to use Internet Explorer to see them. does anyone have the solution to my problem? i hate explorer so much and Firefox is so quick i use it as my main browser.
== URL of affected sites ==
http://http://www.adtrader.co.uk/

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Custom field in infotype: Cannot see in T588M

Hi ,
I created a new field in CI include of infotype 0008. I can see the field on infotype screen, but i cannot see the same in infotype screen control T588M. I have activated and adjusted the database (se14) after making changes . Please advice..
Thanks
Arun.

Hi,
Solved it myself.. The problem was that I had not assigned screen group to the new fields in the module pool layout.
Thanks
Arun.

Pdf with filled in field that I cannot see...

I've a pdf file where the highlight fields are filled in, but that I cannot see untill I click on the field.?
Is there an option to see the values in the highlight fields?
Thanks for your help. Kind regards, th

The most likely cause is using the Preview application on a Mac to fill-in and save the PDF form. For more information and a partial fix, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

Cannot see the appended fields on BW side

Hello all,
I appended the extract structure of a datasource (added two fields), I can see those field in RSA6 and can see the data in RSA3. Then I replicate it on BW side and am trying to create transformation between that datasource and DSO but I cannot see the added fields in the transformation rules so that I can map it to the infoobjects in DSO. When I see the fields tab of datasource (in datasource tab in RSA1) I can see those two fields but I am not getting now how do I map it with DSO objects.
Can someone throw some light please.
Thanks,
Kiran

hello all,
I tried same thing completely by using 3.x method transfer rules and update rules and it works good.
I finally can see the appended fields. I did the whole process as the 3.x method, transferred the fields in transfer structure, added my infoobjects in communication structure and then did the transfer rules. So now finally I am able to see the fields in datasource and now I am able to map the source fields to the target fields (Z infoobjects) in DSO.
I can see the data in PSA, so I just went ahead and did a direct assignment so that data will go to the target infoobjects but for some reason still those columns are blank, so basically there is data in PSA but its not getting to DSO.
Do we have to anything different in this new version like write a routine or something in transformation rules?
Are these steps right for the new version NW 2004s, or is there any additional step in this new version.
Thanks,
Kiran
Message was edited by: Kiran Mehendale

Apex 4.1. cannot see the details of not null validations generated by apex

Hi there,
I have worked with APEX 3 quite a while. Now I move to new place, and they use APEX 4.
I am currently doing the Advanced Tutorials - Issues Tracker (written for 3.2 ) on an APEX 4.1.
I am quite impressed with a lot of enhanced features of APEX 4.
However, I think I got quite confused about the NOT NULL vaildations.
In the tutorials, they said when creating a form based on a tablle of which the columns have NOT NULL constraint, it will automatically generate NOT NULL validation.
But when I extend the validation section (in both Component View and Tree View), I cannot see any vaildation there.
So I go a head and create some NOT NULL validations for all NOT NULL fields.
Guess what, when I test the form, I got duplicate error messages.
I get these
6 errors have occurred
Project Name must have some value. (Go to error)
Start Date must have some value. (Go to error)
Target End Date must have some value. (Go to error)
Please provide project name. (Go to error)
Please provide project start date. (Go to error)
Please provide target end date. (Go to error)
My validation has error message "Please provide project name" while the automatic one has "Project Name must have some value".
The issue is I cannot find where the automatic validation is.
What if I want to customise the error message rather than just "#Label# must have some value".
Do any of you have any ideas why ?
I guess I must have chosen something wrong during page generation.
It could be quite simple but I don't know where to find the place that turn on/off the automatic not null validation, or at least customize these automatic error messages.
I currenly develop the application using workspace admin account.
Thanks a lot in advance.
Ann

I found it. Turn out to be the Settings, choose No for Required Value.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

Cannot see PI receiver(Proxy) adapter - advanced adapter specific message

Hello Friends,
I cannot see adapter specific message attributes in receiver adapter XI (abap proxy) for enabling. I want to use these properties for getting a file name dynamically in a receiver structure.
I had seen a blog by Mr.Michal but that gives details for file to file. Here my target is abap proxy so I cannot see advance tab properties in XI adapter used communication channel.
Clearly my interface is file to ecc (using proxy), where i will have to read a file name which my interface picks and has to update in ecc.
I have enabled the sender side File adapter - ASMessage attributes but am not able to find the attributes in receiver side. Does it make any diffrence if am not enable the attributes at receiver adapter.
Thanks very much.

Swarna,
in your scenario in order to have the file name updated on ecc, you must:
1. Set the ASMA properties on sender channel
2. Read the property in mapping and put the value in a custom field on the proxy structure. Create an UD like this:
UD
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String onixdataset = conf.get(key);
--- END UD
3. Manage the filename in the proxy class with your requirements
Regards,
Andrea

Nokia X6 - Cannot see contact number in text messa...

Hi all,
When I am sending a text message, I cannot see the contact telephone number in the To: field. Is there a setting somewhere that I have missed ?
In my previous nokia phones, you can always see the contact name and the number you are using.
Thanks.

1 : Assume that you have entered the different nos. (mobile, Landline, etc)for ONE person under a single Phone book entry..
2 : If you have done the above you will get the pop-up box for selecting the phone no.
3 : When you select the no. from the list you know which one was selected (... and it is not a landline no..)
Then why do you need to see the no. in the 'To' field once again ?
And you can first write the Text message and then add receipients in the 'To' field...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Cannot see my schema in Catalog

Hi !
Any ideas why i cannot see my schema in Catalog of sap sandbox system ?
I can find my tables only wtih find tables button.
Thanks!

Right click on the system name in the Navigator window of the HANA studio (DCC (<USER ID>))
- Select Properties
- Make sure you are in “Database User Logon” section of Properties dialog
- On the General tab, enter your password () into the Password field
- Click OK
I Hope it helps
G

New custom field in MCVBAK not available for selection in RSA5

I added a custom field to the communication structure MCVBAK. When I go to RSA5 and select the Maintenance button to select it, it is not visible in the list. Do I need to do something other than add to MCVBAK to make it available for selection?
Thanks.

Hi Boater,
Have you included this new field from MCVBAK in the extract structure from LBWE T-code? If you haven't, you need to do this and it will be available in RSA6. Hope this helps.
Thanks and Regards
Subray Hegde

Google search is grayed out and I cannot see what I am typing

FF 6.0.2, Google search bar is grayed out and I cannot see what I am typing. The Search bar works but It is annoying.
Please help and Thanks in advance
Mike Sousa
[email protected]

Site url field has a grey text as "www.yoursite.com" , the OK button will only be active once site url is entered.
Try to type in the site url and then check.
Thanks,
Sanjit

Cannot see WM stock

Hi
I have assigned a WM to a Sloc in the Ent. Struct and done all the related customizing.
Posted some unrestricted stock to the plant/sloc. But still in MMBE i cannot see any stock in the WM.
When I create a delivery in vl02n, i can see that the picking field is grayed out meaning the config for WM is correct,
I try to create the transfer order for the delivery so that the item can be picked.
I get the error
Storage location is assigned to lean WM
Message no. L3434
How do i resolve this problem?
Thanks

Hi,
You assigned to Lean warehouse the storage location in IMG.
Assign plant,storage locations to central warhouse. Then it will work.
Thanks

Cannot see fields of MCVBAK in LBWE

Similar Messages

Maybe you are looking for