Cannot see files burned with Vista

I burned some photos to a DVD using Windows Vista, but I cannot see them in Finder. All I see in Finder is a "Recordable DVD" with nothing in it. If I do "Get Info" I see the following:
General:
Kind: Folder
Size: Zero KB on disk (Zero bytes)
Name & Extension:
Untitled DVD.fpbf
Burning:
Device: HL-DT-ST DVDRW GSA-S10N
Media capacity: 4.37 GB
Content size: 1.3 MB (i.e. the photos are there! somewhere ...)
Now, "Disk Utility" shows the following info:
Name : HL-DT-ST DVDRW GSA-S10N
Type : Disk
Disk Identifier : disk1
Media Name : HL-DT-ST DVDRW GSA-S10N Media
Media Type : DVDROM
Connection Bus : ATA
Connection Type : Internal
Connection ID : Device 0
Device Tree : /PCI0@0/PATA@1F,1/PRID@0/@0:0
Locked : Yes
Writable : No
Ejectable : Yes
Mac OS 9 Drivers Installed : No
DVDROM : Yes
Optical Media Type : DVD+R
Device Type : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW
Location : Internal
Total Capacity : 4.4 GB (4,700,372,992 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Any ideas of how to solve this?
Thanks!

I have a similar problem with CD's created with Vista, but if the preferences are set correctly in Vista, compatible CD's and DVD's can be created.
Following is from Microsoft:
http://windowshelp.microsoft.com/Windows/en-US/Help/2af64e60-60aa-4d79-ab6c-3a5d b5806cbe1033.mspx
Understanding the difference between the Live File System and Mastered disc formats
If you have burned CDs using Windows XP, you are already familiar with the Mastered format. The latest version of Windows offers a new format, called Live File System. Discs that use the Live File System format are often more convenient because you can copy selected files immediately and as often as you want, as if the disc were a floppy disc or USB flash drive. On the other hand, Live File System discs can’t be used in all computers and devices. Use this guide to understand the difference between Live File System and Mastered discs:
Discs formatted with the Live File System option:
• Work like a USB flash drive or floppy disk, meaning you can copy files to disc immediately without having to burn them.
• Are convenient if you want to keep a disc in the burn drive and copy files whenever the need arises.
• Are only compatible with Windows XP and later versions of Windows.
Discs formatted with the Mastered option:
• Don’t copy files immediately, meaning you need to select the entire collection of files that you want to copy to the disc, and then burn them all at once.
• Are convenient if you want to burn a large collection of files, such as a music CD.
• Are compatible with older computers and devices such as CD players and DVD players
Why are there different versions of the Live File System format?
Each version of the Live File System format is compatible with different operating systems. Depending on which computers you plan to use a disc in, you might need to select a different version of Live File System. If you plan to use your disc on the latest version of Windows, however, you will never need to change the version of Live File System you use. If you need to make discs that are compatible with earlier versions of Windows, use the table below to select the right Live File System version for your needs:
The following table describes Live File System versions and their appropriate uses.
Live File System version Best for
1.02
This format can be read on Windows 98 as well as many Apple computers. You should use this version if you need to format DVD-RAM or MO (Magneto-optical) discs.
1.5
This format is compatible with Windows 2000, Windows XP, and Windows Server 2003. It might not be compatible with Windows 98 or Apple computers.
2.01
This format is compatible with Windows XP and Windows Server 2003. It might not compatible with Windows 98, Windows 2000, or Apple computers.
2.5
This format is designed for the latest version of Windows and might not be compatible with earlier versions of Windows.

Similar Messages

  • DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS.

    DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS. Same goes for older versions of DNG.  I use the same setup of security on both systems.
    Can anyone help?

    Run an Apple Hardware test.  That may provide a clue:
    http://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    If you have all of your data backed up or an external clone HDD, I would try erasing the internal HDD,  reinstalling the OSX and then upgrading the software to 10.6.8.
    Ciao.

  • I can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks

    i can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks

    They are DVDs with video files from a little more than 2 GB per file, were burned in Snow Leopard, with UDF file system, now that I updated to Mavericks when I try to read disks displays the directory in the finder a moment and then disappear and does not display them show them more. It is impossible to read the discs, but only those who were burned with UDF file system. Thank you for your help.

  • Need help setting up a file sharing with VISTA

    Hi,
    Can somebody help me with setting up a connection to a Windows Vista computer. I followed all the instructions from this forum but still it doesn't work.
    Here is what I'm doing:
    1) Sharing -> File Sharing -> enabled
    2) Sharing -> Options -> activating SMB
    3) Network -> Options -> WINS -> "WORKGROUP"
    4) Network -> Options -> 802.1X -> activating 802.1X
    Under Sharing I see a lable which tells me that Windows user can access my computer via the address smb://x.x.x.x
    In Windows this address doesn't work and I cannot see my Mac computer nor can I see the windows computer on the mac.
    It worked so well with TIGER.
    Do you have set the DHCP to automatic address on both, Mac and windows or do you use a static ip address?

    In windows when you do "map network drive" you need to enter "\\server\share" (without quotes).
    In Vista, go to the Windows Button > Computer. The "map network drive" option is in the bar in the top of the window. You may need to enlarge the window or click on the little expand arrow to see it.
    smb://server is used when you're connecting to a windows share from the MacOS.

  • Cannot reduce file size with PDF X

    Hi, have created a 1 page document in pages that has some hi-res digital SLR shots, so 5pics has pushed file size to 21mb. I cannot email this around, so went help hunting and determined that pdfx was the answer to my dreams. It all works in principle, except the vital bit, i.e. after pdfx'ing, my new file, it was still around 21mb......managed to then use GRABIT as a bodge to get the file out the door. Any clues? Mac Help indicates that this should work or am I missing something? The aperture brochure is over 700 pages and full of images and that weighs in at only 20.4mb !!!!!
    Hopefully its me missing something obvious, or do I need Adobe writer !!!!

    I kinda figured that as an option, but I just want to be able to slot items in and then decompress on mass to minimum file size. The pro tip of the week eludes to opening text edit but I cannot open a pages doc or pdf with text edit. Just looking for the least number of key strokes and things not to have to remember when I am banging a document together. There must be a faster way. It also shows the quartz settings on line, but cannot see this anywhere in Leopard......

  • Windows user cannot see files copied into a folder

    File share is on a Windows 2008 (R1) server.  
    We use shared folders as mailboxes for users.  When the file scanning person (Heidi) scans the incoming paper mail, it is placed in each user's individual mail folder on a shared drive.  Each user has full control permissions on their mail folder.
     All of our users are running Windows 7 Pro x64, with the exception of two people who run Windows XP SP3.  Heidi is one of those users.  
    Angela has a mail folder with full control permissions.  When Heidi scans something from her desktop and places it in Angie's mail folder, Angela cannot see it from her computer.  Anyone else can see it fine.
    I set up a Windows 7 VM and logged in as Angela and I can see the file with no problems.  So the only time Angie can't see her files is when she's logged in to her computer in her own office.  Anyone know why?  

    Hi,
    You did not mentioned the system version of Angela so I assume it is a Windows 7 system.
    There is a known issue when Windows 7 users accessing a folder, newly created or deleted files are not updated immediately. Please test the following hotfix.
    SMB2 directory cache is not updated correctly if a file is deleted in Windows 7 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2646563/en-us
    Also the rollup update is always recommended to be installed:
    An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1
    http://support.microsoft.com/kb/2775511/en-us
    If you have any feedback on our support, please send to [email protected]

  • Wireless file sharing with vista?

    I have a powerbook g4 running 10.3.9 and have been give a vista machine from work, now there are files I need to transfer between the 2 computers, my IT guy is mac stupid and blew me off, I am vista stupid, so you get my dilema, I have turned all the file sharing on and yet cannot see the vista machine on the mac nor the mac on vista? Any helpful experienced advise would be grand, thank you!
    Shawn

    This should get you started: http://www.ifelix.co.uk/tech/3024.html

  • Standart Portal User cannot see Website created with WPC?!?

    Hi there,
    just a new Question.
    I created a Website with WPC as shown in this Blog:
    https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5924
    Web Page Composer u2013 how easy it is to create and publish a web page (Part III)
    I created also a User that have rights:
    Groups:
    Everyone
    Authenticated Users
    Roles:
    Testrole  (That one i created for the Website)
    But my user cannot see the Website after Logging in.. In the Menu there is a Menuentry called: Website
    Thats correct. But the Site do not load.
    After i put the User in: Group - Administrators i can see the Website... whats wrong here?
    Regards
    Bjoern

    OK i am a step forward.
    i checked help.sap.com and find a hint to the Security Zones.
    Defining Permissions for Security Zones
           1.      Navigate to Security Zones ® com.sap.nw.wpc ® wpc.
           2.      In the context menu of the following folders, choose Open Permissions and define the permissions specified.
    Permissions for Security Zones
    Folders
    Roles/Groups
    Permissions
    medium_safety
    Site owners, editors, and authors (for example, the wpc_editor_role role)
    Select the End User checkbox.
    You can leave the default entry for the Administrator column as None.
    no_safety
    Visitors (for example, the everyone group)
    Select the End User checkbox.
    You can leave the default entry for the Administrator column as None.
    I changed the no_safety (i added Group - Everyone)
    Now i can see the Page.. but i also see at the top right of the page: EDIT PAGE
    And a Standart EndUser should not see: Edit Page
    What can i do here?
    Regards
    Bjoern

  • Second system User cannot see files for first system User

    For reasons too complex to go into, I had to set up a second system User. (Okay, an Apple tech at the Apple Genius Bar did this, to fix corrupted Apple Mail)
    I am both Users. Both are admins.
    According to the documentation, User2 should be able to see files belonging to User1 (and vice versa, I presume), but this is not happening. It looks like I have to manually transfer files from User1 to User2. (Once I do this, I will abandon User1, so I don't have to keep them in sync.)
    How to set up so User2 has access to User1's files (and vice versa)?

    Once you enable sharing, you use the Finder window to go to the other user home folder/directory. For example, if you're logged in as user1 and you want to see the user2 tree, just tell Finder to open /Users/user2 (via the Go command). This assumes that all your user folders are located in /Users - if you have for example a separate disk for user folders then you would substitute that volume name - for example you have all your user home directories on /Volumes/Users, you would tell the Go command /Volumes/Users/user2
    Also, just to make something clear - don't spread your files across the two user accounts - copy all the stuff from both into one of the user accounts and then when you have everything you need, you can get rid of the account that is no longer needed. The only problem you might run into is that you have files owned by an account that is different from where they are physically located. But if you copy things (don't move them - copy them) you should not run into this issue. But if you do run into this issue, it is easily resolved with a couple of Terminal commands usually. Do you know how to copy things with Finder as opposed to move them?
    Does that help?

  • The burn with Vista

    My burn quility with vista *****, I've tried slowing the speed. Doesn't work. i had the same problem with my XP machine, slowing burn speeds hepled.
    Any help.....

    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Dell Inc. Inspiron 5721
    iTunes 11.1.3.8
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002FB7200B6E2500
    Current user is not an administrator.
    The current local date and time is 2014-01-01 16:14:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.3.8 (x64) is currently running.
    iTunesHelper 11.1.3.8 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    D:   PLDS DVD+/-RW DU, Rev 
    Audio CD in drive.
    Found 15 songs on CD, playing time 55:35 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:13:47
    Track 3, start time 07:40:44
    Track 4, start time 11:32:54
    Track 5, start time 14:33:34
    Track 6, start time 18:24:06
    Track 7, start time 22:00:28
    Track 8, start time 25:36:27
    Track 9, start time 28:47:47
    Track 10, start time 32:56:24
    Track 11, start time 37:07:54
    Track 12, start time 40:11:29
    Track 13, start time 45:02:62
    Track 14, start time 48:42:65
    Track 15, start time 51:56:11
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are:   24.
    The drive CDRW speeds are:   24.
    The drive DVDR speeds are:   24.
    The drive DVDRW speeds are:   24.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DU on CDR media at speed 24X.

  • WVC80N cannot see the image with VLC when multicasting

    I am using the WVC80N camera and have set the multicast address to 225.0.0.6 and the port to 2006 but when I try to view the image with VLC I cannot see and image. HTTP and rtsp both work but I need to use multicasting, has anyone gotten this to work?

    When you talk about the multicast , may I know if where is it set? Is it set on the route,server or computer? When you talk about VLC, where you referring to the VLC media player? Is also possible if you will show us a complete diagram on how your network has been setup so that we will be able to provide you the right recommendation.  

  • Cannot see Transaction replication with updatable subscription in new publication wizard-sqlserver 2005 standard edition

    Folks,
    I am planning to implement transactional replication with updatable subscription between two sql2005 Instance .I am surprised that i cold see this type of replication in the new publication wizard in the source server instead i see peer-to-peer replication.
    Could you please help me in understanding how to setup  transactional replication with updatable subscription in sqlserver 2005 standard edition.
    Thanks.

    Hi soories,
    In addition to Ashwin’s post, peer-to-peer replication is available only in SQL Server 2005 Enterprise Edition. Please
    execute ‘Select @@version’ in SQL Server to verify the version and edition of your SQL Server instance.
    Also if you cannot see the option “Transaction replication with updatable subscription” in New Publication Wizard, you can use T-SQL to achieve this requirement.
    How to: Create an Updatable Subscription to a Transactional Publication (Replication Transact-SQL Programming)
    https://technet.microsoft.com/en-us/library/ms146922(v=sql.90).aspx
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Cannot see file and folders copied from other windows 8

    Hi everyone,
    The problem is the next:
    I have new PC for that i was asked to setup and install software, i perform on it clean windows 8 install, it have single HDD 1TB that was partitioned by regular windows setup option to system drive C: 100GB and all left space was partitioned as drive D:
    After setup finish i only boot to system to check that everything is OK and without to make ANY change to windows shut it down.
    I physically disconnect HDD from new PC and connect it via standard USB 3 docking device to my own PC that also run windows 8 i can see the new connected HDD with all partitions without any problem! Than i create on second partition on new drive folder and
    copy there some files, after copy finished i disconnect the drive in safe way by performing "eject" option in windows.
    i connect new drive back to new pc, boot to windows and access the second partition and it ... empty, no folder or files on drive, it also show like no space was used !!!
    MOST IMPORTANT ! - Why it don't looks like security or permission or even hardware problem - NO any major security changes was performed on my own (old) PC, but most important fact when i connect other hdd to same dock station and create folder and copy some
    files and then connect it to NEW PC - problem does not exist !!! i can see and access without any problem the folder and files on both PC's !
    I also tried:
    to reinstall windows on new pc
    to create or delete partition after setup in both PC's
    to check folder and drive permissions and adding "everyone" with "full control"
    to turn on "show hidden files and folders" and "system files" too
    to copy or create new different type files
    Interesting - if i create a folder in NEW PC i can see this folder on OLD PC and copy files to it, but whet i connect drive back to NEW PC it sometimes show the folder have those files and even use the appropriate space and programs even try to open those files
    without any security warnings but it cannot be open properly because files looks corrupted !
    Thanks for any help !

    Hi,
    According to your description, I don't think this is system problem. More like HDD or its interface problem.
    Have you tried to reconnect your new HDD to your own computer again after you copy some file to it but couldn't find anything on new computer. If there is problem in new PC, how about your own PC?
    Please have a try, If there was any progress, feel free let us know.
    Roger Lu
    TechNet Community Support

  • Can't see files burned to CD from windows machine

    I'll keep it short.
    CDROM burned on a windows PC has files that I want to view on my imac G4. When I put the CD into my mac, there are no files...only folders. If I do "get info" on the folders, they are all at zero KB. If I then take the CD to any windows PC, all of the files are viewable, and the folders show their true sizes. I can then put the files and folders on a USB drive, go back to the imac and see all of my files at that point. This has been tested thee times with the same result every time.
    Any ideas?

    The problem may be how the CD was formatted. Macs support ISO-9660 better than any other crossplatform format.
    Recently Software Architects has improved UDF support on the Mac, though I have yet to test it to see how true their claim is:
    http://www.softarch.com/us/products/rdvd.html

  • Cannot set File Association in Vista to Acrobat Reader 9.0

    After installing Acrobat Reader 9.0 on Vista Ultimate SP1, I am no longer able to associate the pdf extension with Reader. When attempting to change the pdf file association, Reader is not offered as an option. When clicking the Browse button and pointing to the Reader 9.0 file, it still is not offered as an option. Reader works fine when loading files from within the application.
    Do I need to edit the Registry? Which key and what value?

    Have a look at
    http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
    It looks like you have to remove any existing associations before
    trying to apply the correct ones.
    Noel

Maybe you are looking for

  • Flat-panel display that did work... please help!

    Hi everyone. Your help on a little problem I've got would be muchly appreciated. Please allow me to explain. I bought my Dad a Mac mini as his first computer, about eight months ago. We couldn't afford to get him a new monitor with it - so I picked u

  • Document entry report

    Dear Friends Is there any report  to view  the  only document entry of particular GL account that has been posted for a period.( Only document entries) Eg; When we post a document. The line items will be recorded into GL account. What we are looking

  • OVD Adapter Configuration

    We have created two different OU using LDAP adapters for two separate AD's and configured under one Tree Top adapter in OVD. In user profile we have a user attribute email which is common in both the OU's. As a requirement, we want to populate the us

  • HT4753 Can auto save work with Photoshop 5.0?

    Can auto save work with Photoshop 5.0? [email protected]

  • Apache in OS X Leopard

    As I was browsing through System Preferences, I realized that I could make my own website using Apache! I have made my web content using iWeb, saved it to the folders User/Sites and /Library/WebServer/Documents. It works great on my local network, bu