Cannot see/find the standard IDOC/BAPI in imported Business system

Dear Friends ,
We have installed the PI 7.1 and registered the CRM 7.0 via RZ70 in SLD of PI as techincal system and created the business system as well . Then i have mapped to the corresponding product and SWCV.
But when i import the business system in ID , i couldn't find the standard(pre-delivered) sender and receiver interfaces ( like IDOC etc., ) .
Please provide your valuable inputs .

Rangarajan,
Have you added the correct SWCV to the BS and TS?
i think you have not linked the TS and the Product correctly .
Create a Product->for this product create a SWCV->go to technical system reference the
created product there->Go to BS and check select the TS created earlier.
after doing above step , refresh sld cache and check again.
Please refer this wiki post :
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
Regards,
Srinivas

Similar Messages

How to find the standard Idoc for Transfer Order (LT03)

hi
How to find the standard Idoc for Transfer Order (LT03)
How to create the Idoc on LT03
plz help me out
Thank u
Ram

Someone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
Please reward points

What is the Way of finding all standard IDOC avilable in SAP R/3 modulewise

Dear Experts,
How to know list of all avilable standard IDOCs present in SAP R/3 Modulewise(i.e. HR,MM etc)?is there any standard tcode to see all the standard IDOC(or we have to follow some other way) ?
Eagerly looking for your valuable opinion.
Regards,
Rasmiraj Tripathy

Hi,
I am not sure that it is possible to see module wise.Just go through this we81,we82.
Regards,
Madhu.

How to find the Standard Program associated with a Standard IDOC

Hi,
I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

Hi,
For outbound IDoc the program can be found:
1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
For Inbound IDoc the program can be found:
Via WE42 where inbound process and its related inbound function module is maintained.
In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
For extending IDoc look at the following links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
It can be summarized as follows:
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
Hope this helps.
Regards,
Gajendra.

What are the standard IDOC's available in IDES? where can i see in IDES?

Dear All,
Can any body let me know what are the standard IDOC's available in IDES? What is the path for the same?
Thanks in advance for replies
regards
srikanth

Hi,
IDOCs are intermediatery Documents, we can check for IDOCS using Tcode
WE01 : Create IDOC
WE02 : Display IDOC
WE19 : Reprocess IDOC
etc
Thanks
Kalyan

Standard IDOC/BAPI to create work order in CRM from ECC PS

Hello Guys,
Any input on any standard IDOC/BAPI I could use to create a work order in SAP CRM based on the data feed from SAP ECC (Project systems)?
Any help on this would be really appreciated.

Hii.
Did u get answer of SAP-> XI->CRM. IF so, share wid us.
I m stuck in same kinda scenario

Error Message= x Cannot find the HTML help browser installed on your system.

Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!

Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

How to insert the standard idoc segment in the idoc

Hi Experts!
We are using SRM 7.0.Wo got a requirement as below:
In our organiation there will be both regular employees and the non-employees.For non-employees address will not be maintained in Tcode PA20 in backend ECC HR system.Where as for employees address will be maintained.
As the HR replication will be done by scheduled jobs, in case of non employees replication is not happening due to the missing address in PA20.In order to avoid this we are building some logic and as part of it we need to add the standard IDOC segment 'E1P0006' in the main idoc as this particular segment is for address and it is missing due to the missing address in PA20 for non-employees where as this idoc segment will be there for employees.
As am very much new to idoc concept can some one help me how to handle this if any one of you came across this kind of scenario.
Please find the attached document for the idoc seq we have.
Thanks in advance.
Regards,
Kalyani

1. Open the form
2. Choose Tools--> Diagnostics
3. In the block field choose $DESCRIPTIVE_FLEXFIELD$
4. Field will show the list of all the DFF's enabled for that form.
5. Choosing one will display the name of the DFF in the value field.
Thanks
Nagamohan

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

How to find the Standard DFF Name In oracle apps

hi,
How to find the Standard DFF Name In oracle apps
thanks

1. Open the form
2. Choose Tools--> Diagnostics
3. In the block field choose $DESCRIPTIVE_FLEXFIELD$
4. Field will show the list of all the DFF's enabled for that form.
5. Choosing one will display the name of the DFF in the value field.
Thanks
Nagamohan

Finding the correspponding IDoc No's for values in a segment of the Idoc

Hi,
I have around 100 work order numbers, based on which I want to find out the failed Idoc numbers. These work order numbers are part of one of the segment fields in IDocs. I know the message type of the IDocs.
I do not want to use transaction WE09 as it would be too time consuming, entering one work order number and finding the correspponding IDoc. Is there a way of finding all the correspponding IDoc numbers for the work order numbers that I have at one go.
Any help would be greatly appreciated.
Thanks and Regards,
Mick

Thanks Raja.
But I dont want to write a report. I was just want to get the IDoc numbers using a table or a function module. Any idea if using Transaction SE16N can help?
If yes how should I go about it, as I have already tried querying table edid4 passing all the work order numbers. But no result. What I have observed is that the data is stored in the field application data in the table and to get data querying the table, passing the work order number might not be possible. As the application data contains a lot of other data also.
Regards,
Mick

How to find the standard Layout(Forms) list in India Baseline version

Hi,
Can anyone suggest me how to find the standard layout(forms) in the India baseline version.
i want total standard form(Scripts/Smartforms) name available in India baseline.
Thanks in Advance!!

Hello,
Goto Se710> Do F4 in form. In next screen goto Find->Technical Search function and execute it. It will show no. of forms in the status bar at the bottom.
Cheers,
Balaji

Can't find the standard infoobject/infocube in BW system

I have studied BI for only 2 months. When I try to extract data from R/3 system, I find that I can't find the standard Infoobject/infocube such as 0plant, 0purchaseorganize both in RSA5 and RSA6. Our basis team advice me to install a patch for my SAP gui. So could anybody tell me which patch should I install
Best regards
Edited by: Yang12 on Sep 16, 2009 4:04 PM

Hi expert,
I also has met this kind of issue , i can't found out infoobject( 0CO_AREA,0BUS_AREA,0RESP_PERS...) in BW(ECC6),
And i have perform the steps base on your instruction,but still can't found 0PLANT(i have not install datasource),
Please help me;
By the way,
Do we need install datasource at frist,then go to RSA1-> click on BI Contenct button on left -> click ........
If yes,how does i know which datasource need be install;
for installing 0PLANT - go to RSA1-> click on BI Contenct button on left -> click on object types -> Expand infoobject -> click on select objecst and clifk on find and type 0PLANT and click on transfer selections
Edited by: 350761380 on Sep 16, 2009 4:50 PM

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos?

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.

Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed.

Cannot see/find the standard IDOC/BAPI in imported Business system

Similar Messages

Maybe you are looking for