Cannot see HTTP Header in Browser and in application trying to intergrate

I cannot see the HTTP header in browser using Fiddler and Liver Http Header add on in web browser. I tried with both IE and Firefox.
I can see the header value get set in OAM Diagnostics log.
We are using OAM 11gR2 with OAM 11G webgate for OHS 11g.
i have set response in authentication policies as OAM_REMOTE_USER Header and Value as $user.userid
Please let me know.
Akshay
Edited by: 993160 on Mar 12, 2013 1:07 PM

Hello,
ODATA is case sensitive, try:
https://mycompany.sharepoint.com/sites/pwa/_api/projectData/Projects/
Capital P on Projects
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Similar Messages

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Good point BDAqua, the Escape key helps get me back to reality in Lion.
While I've only dabbled around a little in Lion since it's release (I upgraded a 10.6 Clone to Lion on one of my FireWire Drives) now I'm currently downloading Mountain Lion (to upgrade a Clone of that Lion Clone) so that now I can continue to move forward in madness.
P.S. Trust me, I'm not laughing.

Cannot see form fields on EBay and Ad trader sites

cannot see form fields on EBay and Ad trader sites. when asked to fill a form with item details the boxes that you have to fill in are missing. using Firefox 3.6.2. i have contacted Ad trader with the question but have got no replies.
i have to use Internet Explorer to see them. does anyone have the solution to my problem? i hate explorer so much and Firefox is so quick i use it as my main browser.
== URL of affected sites ==
http://http://www.adtrader.co.uk/

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I have a Photoshop CC subscription but I cannot see it in "My products and services"

I have a Photoshop CC subscription but I cannot see it in "My products and services".
I tried to follow http://helpx.adobe.com/x-productkb/global/find-serial-number.html , but that DOES NOT HELP.
Thanks.

Hi ytwong,
I am Email ing you an link which you have already recieved in mail when your was placed & approved. By using that link you got in the mail or that I will Email you, you will be guided appropriately.
You have an active subscription.
Kind Regards,
Rajshree

My location service is not working from the day one the response is that (cannot able to determine the location) .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?

From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.

Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address.

Cannot see ESB designer on JDev10g and JDev11g

Hi all,
Help me, i cannot see ESB designer on JDev10g and JDev11g after update soa-jdev-extension.zip.
This is my extension log on Jdev11, pls help me fix this.
oracle.BC4J
Warning: Classpath entry F:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
oracle.bam
Error: Not loaded: Missing dependencies: oracle.bpm.modeler
oracle.bpm.ess
Error: Not loaded: Missing dependencies: oracle.sca.modeler
oracle.bpm.events
Error: Not loaded: Missing dependencies: oracle.sca.modeler
oracle.bpm.mapper
Warning: Classpath entry F:\Oracle\Middleware\jdeveloper\modules\org.jaxen_1.1.1.jar not found.
oracle.bpm.modeler
Error: Not loaded: Missing dependencies: oracle.sca.modeler
oracle.bpm.modeler.plugins
Error: Not loaded: Missing dependencies: oracle.bpm.modeler
oracle.bpm.workflow
Error: Not loaded: Missing dependencies: oracle.sca.modeler
oracle.sca.mediator
Error: Not loaded: Missing dependencies: oracle.sca.modeler, oracle.bpm.modeler
oracle.sca.modeler
Error: Not loaded: Missing dependencies: oracle.jdeveloper.asadapter.deploy
oracle.sca.modeler.plugins
Error: Not loaded: Missing dependencies: oracle.sca.modeler
oracle.xsqldt-ide
Warning: Classpath entry F:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
Thanks a lot

In 11g JDEV there is no ESB it has been replaced by Mediator. You create these in a composite.
10g JDEV doesn't require the extensions. What version are you using and what path do you use to look for the ESB?
cheers
James

TS2755 I cannot see contact names in messages and I cannot send or receive messages. This started last night. I have updated the latest software. I have rebooted several times.

I cannot see contact names in messages and I cannot send or receive messages. I have downloaded the latest software. This started yesterday.

What system is your mail in? Corporate Exchange? GMAIL?

I cannot see "iPhone" in the list of interfaces when trying to configure it in the network options. Do you know how to fix it ?

I cannot see "iPhone" in the list of interfaces when trying to configure it in the network options. Do you know how to fix it ?

When I go to SYSTEM PREFERENCES > NETWORK i don't see "iPhone" in the list of Services (AirPort, Ethernet, etc.)
If I try to add a new service (by clicking + ) iPhone doesn't show up in the list of "interfaces" available.
That sounds a bit weird because iTunes can normally sync-up, backup and recover my iPhone.By the way "Personal Hotspot" is already set.

Cannot see backups with Time Machine and Aiport Extreme

My MacBook Pro is backing up to to an Airport Extreme with a USB drive attached to it. The backing up seems to be working. ie time machine say's it backed up my machine.. eg at 1.57.pm today.
When I enter time machine to try and get a backup, it's not there... it has one finder window for "Now" (1st April) and then the next one in the list is 23rd of March. SO I cannot see any of today, yesterday or another other recent backups.
BTW, I had originally made a backup directly to the USB drive. I am not sure of the date but it could have been 23rd of March.
Any ideas?

Hey
I have the exact same problem. I have just switched from direct firewire-based Time Machine backup to an external drive, to said drive now connected to my Airport Extreme. I knew that it wouldn't accept the old TM backups, so I started up: Started the initial backup wirelessly, the unplugged it, and finished it via firewire. All worked fine, and the sparseimage was recognized and so on. After it was done, I attached the drive to the AE again, and it backup up as it was supposed to 3-4 times a day.
That was 3 days ago. But when I checked my TM yesterday, there was just the "today" window, and I couldn't browse anything. Today it's the same story. What gives?
Now, I opened the sparseimage on the TM drive to see if the incremental backups were there, and they were all there, but somehow TM doesn't read them. Can anybody who has a working TM wireless backup tell me if TM mounts the sparseimage to when launched and unmounts it afterwards?
TM worked great before when connected directly – never had a problem before and something tells me it's a problem with the sparseimage...Nevertheless, if it can't be fixed, I am back to friewire-based TM backup ;-<
Message was edited by: Hedemann

TS3989 I cannot see photo steam on icloud and I can't find a folder for photo stream on my pc

I cannot see photo stream on my icloud and I can't find a folder on my pc for photo stream as well. What is the problem?

For me the folder was generated automatically:
My Pictures > Photo Stream > My Photo Stream

Macbook Air cannot see Wifi but iPhone, iPad, and boot camp Widnows can

I just started living in an apartment with a shared wifi router. I have no control over this router and i'm fine with that since I'm just with my girlfriend here and don't have a lot of other uses for it other than simply downloading stuff and using a computer.
The problem is that literally every device I have (iPad, iPhone) can see and connect to the wireless network. Oddly, my Macbook Air 2013 cannot see this network. Some days I am actually able to connect and it works fine but then it'll just disappear and I cannot find it again. I have bootcamp installed on the Macbook Air and when I switch to Windows I can see the network and can connect with no problems.
I don't understand why the Mac OS side of things fails to even see the network when this is one of the devices with probably the most powerful network card considering it's 2013 and even has the ability to connect to ac wireless signals.
Any suggestions? I would prefer to use my Mac OS side of things rather than Windows due to battery life at least, among other obvious things.

I FIXED IT!!!!
I reset my airport express (for the umpteenth time) but this time I did a manual setup instead of going through the assistant. Changed the Channel to 10 (I am surrounded by other wifi networks using 1 and 11, so I just picked anything but 1 or 11) and configured it for 802.11g only (it defaults to b/g on the setup assistant).
So far, no problems, and both MBA and MBP connect.
I would guess this has started to happen recently due to one or both of
- recent Lion updates
- additional wifi networks popping up in my apartment building causing some kind of interference
That's my layman conclusion anyway.
Thanks for all your help! I feel like a heavy weight has been lifted off my shoulders.

Cannot see some of my downloaded and installed pro...

Hello!
I don't understand this - when I look in my Ovi Store and search my "Own Files", then I can find e.g. the Youtube app. I installed it today via Ovi Store.
When I look in my main menu under Programs, I cannot find it.
Also, if I search my memory card with the file manager.
I have the same behaviour with "Townsmen 6" - I downloaded and installed it long ago, and then my phone became a deep reset and software update at the Nokia Care Point - but the software was installed on the memory card, which of course was removed before deep reset.
I can find all this programs in the Program Manager, but not in the menu under Programs or any other folder and also not in the File Manager.
What's up with this phone? I didn't hack around with my phone - every app until now was installed via Ovi Store and removed via onboard tools from the phone.
Best wishes,
Schlaumy
"Two beer or not two beer?"

I can tell you another funny story:
I deinstalled all applications, which could be seen in the program manager, but not in the menu - this was Townsmen 6 and the Youtube app.
I reinstalled the Youtube app with Ovi Store - still it cannot be seen in the menu, and also not in the file manager.
BUT IT CAN BE STARTED IN THE OVI STORE! And it works completely!
What's this? A total inconsistency! I will try to search the phone, when connected to the PC.
What else can I do??
Best regards,
Schlaumy
"Two beer or not two beer?"

Cannot see Canon MP620 installed printer and Canon IJ Network

I try to install my new printer Canon MP620 on my iMac G5 (10.4.11).
The installation procedure seems ok according the documentation.
When I want to use the printer the "Canon IJ Network" is not available. This option should be present when I click on "More Printers" in the "Printer Browser" (others protocol like AppleTalk are listed).
The Canon MP620 driver is not visible in the driver list.
The printer can be use by other computers (XP, Vista) and is available on my LAN . I can see the printer with the "Canon Network tool" and the network scan function works fine.
I reinstalled, download the last version from Canon web site, repaired authorizations, ... without success.
Any idea and help are welcomed !

The printer is connected with a RJ45 cable 100 MBytes. I can ping it from the mac, the http service of the printer is reachable ... thus I guess this is not a network problem.

Cannot see OData code in browser

Hello,
When i go to "https://mycompany.sharepoint.com/sites/pwa/_api/projectData/projects/" to view the code and try to generate custom Odata, I get the following in my browser (I'm running IE 11):
<code
/>
<message xml:lang="en-US">Resource not found for the segment 'projects'.</message>
</error>
Would someone have an idea what is wrong? Thank you.

Hello,
ODATA is case sensitive, try:
https://mycompany.sharepoint.com/sites/pwa/_api/projectData/Projects/
Capital P on Projects
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Cannot see asp pages on browser

This is my umpteenth issue (I'm facing so many these last two
days and I fell exhausted) :
I can't see the result of my work on asp pages. After I
create a recordset, I save the page and put it on the remote
server, I press F12 to check the outcome on IE. But nothing... this
message is displayed:
"Internal Server Error
The server encountered an internal error or misconfiguration
and was unable to complete your request.
Please contact the server administrator to inform of the time
the error occurred and of anything you might have done that may
have caused the error.
More information about this error may be available in the
server error log."
Does that depend on something wrong I do? Or is it my server
provider responsibility? It's sunday and I cannot call them.
Somebody may say I should try my files locally but I've gained the
remote connection so difficultly that now I feel anguished at the
idea of studying hot to set a local connection. Maybe I have to
resign to this idea, but maybe some of you can skip it and still
advice me something.
Thank you very much,
Giuseppe,
Rome

no idea about your problem but believe me, working locally
will save you
a lot of headaches!
for somebody helping you to deal with setting a local
connection you
must post if you're using DNS' or connection strings. Access
or MS-SQL?
giuseppe craparotta wrote:
> This is my umpteenth issue (I'm facing so many these
last two days and I fell
> exhausted) :
>
> I can't see the result of my work on asp pages. After I
create a recordset, I
> save the page and put it on the remote server, I press
F12 to check the outcome
> on IE. But nothing... this message is displayed:
>
> "Internal Server Error
> The server encountered an internal error or
misconfiguration and was unable to
> complete your request.
> Please contact the server administrator to inform of the
time the error
> occurred and of anything you might have done that may
have caused the error.
>
> More information about this error may be available in
the server error log."
>
> Does that depend on something wrong I do? Or is it my
server provider
> responsibility? It's sunday and I cannot call them.
Somebody may say I should
> try my files locally but I've gained the remote
connection so difficultly that
> now I feel anguished at the idea of studying hot to set
a local connection.
> Maybe I have to resign to this idea, but maybe some of
you can skip it and
> still advice me something.
>
> Thank you very much,
> Giuseppe,
> Rome
>

Cannot see HTTP Header in Browser and in application trying to intergrate

Similar Messages

Maybe you are looking for