Cannot see ICC profile when Proofing ?

Hi All, using PSP CS3
I am trying to get a ICC profile to appear as 'Device to Simulate when soft proofing in CS3. This ICC file is from Adoramapix.com, to simulate their printers. When I drop down the list of 'Devices,' there is a older Adoramapix prifile, but I can't seem to get rid of it or remember how I added it?.I have already right clicked on the ICC and selected 'Install Profile.' Not really sure what I was doing, but I also tried to add it under Display Properties>Advanced>Color Management. But I would get an error 'This is a printer profile which cannot be associated with this monitor.' I do have a canon printer at home, but never use it for printing photos.
Anyone have an idea of how to make this ICC profile appear when soft proofing?

Are you an a Windows machine ? If so these ICC profiles are stored in c:/windows>system32>spool>drivers>colour and new ones should be installed there and old ones deleted from there.

Similar Messages

ICC Profile when saving in PSE9

How do you change the ICC profile when you save a file in PSE9? I need to change the profile to the downloaded version from my photo Lab before they make prints.

To chabge profile of any image you can change it from Image menu.
Steps:-
1. Launch PSE and open the image.
2. For changing mode Go to image menu Image -> Mode and convert the mode as you require.
3.For converting color profile Go to image menu Image -> convert Color Profile and change it as per your requirement.
cheers,
Sam

Recently my iTunes has stop opening but i hear my music just find. Was wondering y i cannot see my iTunes when click on it from my dock?wh

Recently my iTunes has stop opening however i hear my music just find. Was wondering why i cannot see my iTunes when i click on it to open from my dock? It never was an issue before - it just stopped opening all of a sudden.

Hi Bink Wills,
If you can't click Window and then iTunes to bring the Window to the Front, try suggestions in the following article.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
-Jason

Cannot see items move when dragged

All of a sudden I cannot see objects move when dragged in Photoshop CC Mac. They wind up in a new position when dragged but I just can't see them move as I drag them. This would seem to be a preference but do not know where to change it.

When confronted with unexplainable Photoshop behaviour restoring Preferences (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved) is an option:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

I updated photoshop cc but I cannot see the updates when I launch photoshop? I have restarted the computer and that still doesn't help.

I updated photoshop cc but I cannot see the updates when I launch photoshop? I have restarted the computer and that still doesn't help.

Installing the "Update" installs a totally new version. The old version of Photoshop CC is still installed. It is likely you are running the old version.

How Important are ICC Profiles when Importing Stills into Premiere Pro?

Hello,
I came across the following troubling language in a review of one of Steven Hullfish's books on Color Correction:
"I also felt as though the author neglected to give ICC profiles enough attention.
Granted, they are seldom used in pure video workflows, but there are an awful lot of folks out there compositing still images into video content who need to know how to soft-proof against the right destination space in Photoshop so they aren't surprised by the color shifts they see in their ICC-unaware video software. Surely that should merit a pull-quote of its own somewhere."
My photos have been saved in PhotoShop in the ProRes color space. Is this going to cause unpredictablility in how my colors look when shown on a 30 foot screen?
Is Premiere Pro a type of what this author describes as "ICC-unaware" video software?
If so, what steps should I be taking?
Thanks,
Matt Dubuque, 100 Trees

Premiere Pro does not use ICC color profiles at all. Photoshop and After Effects do.
When you are working with non-color-managed applications, it's especially important that you preview your work and check your output on the same sort of device on which your audience will be viewing it.

Where can I see ICC Profile used by scanner?

Friends:
How can I see which ICC profile my scanner used when it scans and the scan opens in photoshop CS5?
Note: Edit>Color Settings does not show it.
Thanks
Migs

Yes, actually the little triangle bottom left can show the profile. Oddly enough my scan didnt enter PSCS5 with a profile, even though the triangle shows profiles for the scanner...
Thanks!
Migs

Elements 7 - Using Custoim ICC Profiles when Printing in Editor

I have downloaded some custom ICC profiles specific for some papers I use. They are there - I can select the profile printing from the organizer - Color Management>Print space - but they do not appear in the list of options if printing in Editor. Am I forced to print thru Organizer now?

>When you open the box in Editor>Print for the ICC profiles, the box doesn't scroll easily. You have to hold the left mouse button down as you scroll to see the entire list.
Try moving the Print window all the way to the left. If you have a small screen, move it further so that the left half of the Print window is off-screen. Then you should be able to see the scroll bar of the drop-down list of profiles.
This bug was identified in PSE 6, and I had thought it was fixed in PSE 7. But evidently not I was just able to reproduce it on my laptop.

My friends cannot see my profile changes

Since the last skype update when I change the information in my profile there is nowhere for me to save the changes and as a result my contacts cannot see the changes. I have moved countries so would like to be able to update all my contact info. Thanks

try rebooting
hold down the home and power buttons untill the apple appears

Startup error: Distiller cannot find ICC Profiles

I'm on Windows 7 with Adobe CS5 Design Premium. This has just started happening recently, and only occurs occasionally, usually disappears after a reboot.
Full message: Distiller cannot find its standard ICC profiles. Please reinstall Adobe Acrobat to correct this problem.
Thanks for any input!

Adobe Tech support was most helpful on this. First download the updated
Distiller ICC profile files at:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4075&fileID= 3790
Unzip the file and copy only the *.icc files (without regard to the subfolders that they are in - in other words, take the files out of each of the subfolders) to the followng folder in Windows 7:
c:\windows\system32\spool\drivers\color
These new files will probably overwrite some old ones.
This solved the problem for me.
This is actually the best solution though I found that instead of copying all the .icc files to the windows\sys... folder, all you need to do is copy the 3 Video files from the RGB folder (VideoHD.icc, VideoNTSC.icc, and VideoPAL.icc). Once you add these three files to c:\windows\system32\spool\drivers\color you will be good to go.
It seems that this was an error on the part of Adobe in that there is no reason to include Video files for printing. Nevertheless, the distiller will look for these and return the ICC profile error message if those files are not present.

Cannot see Airport Express when connected to Cisco corporate wireless - used to work, stopped cooperating recently

I have had an Airport Express at my office for several years to stream iTunes. It has worked fine, including through an upgrade to a new Cisco wireless network. Then it just stopped. I have reset, and then purchased a new AE with updated firmware. I have a green light, and when I connect via an ethernet cable I am getting all green lights, and can see that I have a valid IP address on the network, the router address is correct and the DNS servers appear to be correct. I still cannot see the AE on any Apple device connected to the wireless network....... any ideas? Is this connected to any recent IOS updates? Thanks for any insights......

Found similar (unsolved) issue in the thread below.
http://discussions.apple.com/thread.jspa?messageID=6514677&#6514677
Please reply to the above thread.
thanks

Exchange 2013 EAC Service Pack 1 New mailbox cannot see all OUs when selecting Browse with "Exchange Organization Management " permissions

Single forest 2 Domains. When I go to create a new mailbox in the Exchange Admin Centre and "Browse" the Organizational Unit. I can only see a few OU in the Parent Domain and most in the Child Domain. I have tried "expand All" and
cannot see anywhere in the EAC to set a "Recipient Scope". The account I am using has "Exchange Organization Management " rights and is a Domain Admin as well.
The Exchange servers are members of the Root Domain.
In the "Select an Organizational Unit" menu there is a message "There are more results available than are currently displayed". I have tried searching as well and cannot find OUs that I should be able to.
All the servers have had Exchange 2013 Service pack 1 installed.
Any suggestions?
Regards,
John

Changing that setting resulted in the ECP site being inaccessible. So I changed it back
I have copied the user accounts to test with.
Originals:
User1: can see OU's when making a new user through the ECP (access: domain, exchange recipient admin)
User2: cannot. (Enterprise, domain, exchange, schema admin)
Test users:
test user1: copied from user 1, cannot see any OU's when creating a new user.
test user2: copied from user 2, can see all OU's when creating a new user.

ICC profiles when sending pics to outside labs

I take pics with a Pentax K10D DSLR.
I calibrate my screen with a Huey Pantone unit.
I upload the pics to Iphoto.
I adjust the pics to look great on my screen.
I upload the pics to Costco photo center for printing.
I get back incorrect colors and muddy prints.
Costco tells me I need to upload to them using their ICC printer profiles and that will insure that I get back what I see on my screen.
I downloaded their profiles, but for the life of me, I am unable to determine how to impliment them when uploading the pics to Costco.
I know that professional photographers use photoshop to get great prints from Costco but that is not in my budget.
Please help

1 - iPhoto is a consumer level program designed around point and shoot digital cameras - it does support RAW but if you want to do LOTS with RAW then you need an appropriate program - like aperture for one
2 - You may want to look at PhotoShop Elements which does almost all that PS does for a lot less money
3 - you also may find that updating your software will assist - iPhoto 6 is at least 3 or 4 years old now - there have been two major new versions since it was released
LN
Message was edited by: LarryHN

Cannot see music playlists when trying to update ipod

hello, i've had lots of problems with itunes 7, stuttering music, lock ups etc.- wish i hadn't upgraded!
latest issue is when eventually i updated ipod to 1.2 software and tried to update it i can see playlists for movies and podcasts but not for music.
any ideas how to solve please.
i thinks its bad that apple haven't posted at least a note saying they'll look into these issues

hello again,
i know i can use the black arrow to view playlists on my ipod, but there arn't any - i did a restore on this ipod and so it hasn't got any playlists on it now, and i want to get them back on, i only did the restore because i was having the same problem when i upgraded to 1.2 as i'm having now and i hoped restore might solve it but it didn't!
to get playlists back on the ipod i was hoping to open up the music tab on the large ipod menu and select various playlists from the list inside the rectangle as i used to on itunes 6 and the ones before, but the playlists don't show up for me to select to copy to my ipod, the playlists are still in itunes and i can play them on the computer albeit with bad sound quality since upgrade.
i can see playlists under the movies and podcast tabs and i can copy these to ipod but no music playlists.
as i've said i can copy playlist the long way by dragging the playlist from the grey list on the side of the screen and dropping them on the ipod under devices but this will take days
thanks

Reset my airport extreme to factory settings, now getting flashing amber. Airport utility cannot see the unit when it scans. How do I access the unit?

Reset my airport extreme to factory settings, now getting flashing amber light. Airport utility scan does not see the device, so I cannot access any setup.
How do I make contact with the unit?

I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

Cannot see ICC profile when Proofing ?

Similar Messages

Maybe you are looking for