Cannot see images in Contacts

Hi'
     Just got iPhone 5, updated software via iTunes. Synched contacts with itunes. I do not remember doing anything that should/could have deliberately wiped out all the images in Contacts on iMac, but just realized all the contacts images are not visible, on either device. Checked the Home Library, and there is a folder called Images in the AddressBook folder within Application Support that contains lots of images, so they are not gone. However I cannot figure out how they stopped being included with the cards in Contacts and how to return them to either device.
    Also is this process called Contacts or AddressBook. Seems a bit confusing, like it has two names.
     Thanx for the help

Well for what this worth, I made a set of vcf cards and replaced the entire set of cards. The images reappeared in the Addressbook/Contacts file and then synched via iTunes to the iPhone. The cards I put in the phone have images. Whether this makes sense or not, maybe the process I used will be helpful to someone else someday.

Similar Messages

Azure Storage Blob error - AnonymousClientOtherError and AnonymousNetworkError (why cannot see images)

I have an mobile app and I put images in Azure Storage Blob. when tested by several of our own people (on test and beta), it is all good.
But when we released it to beta and had hundreds (maybe above one thousand) of users to use, lots of them report that they cannot see images. It happens on their iPhones and also on many different brands of Android phones. Sometimes, for the same image,
on one phone it is good, but on another it doesn't show.
When I check blob log, I saw a lot of errors, mainly these two:
AnonymousClientOtherError; 304
"Anonymous request that failed as expected, most commonly a request that failed a specified precondition. The total number of anonymous requests that failed precondition checks (like If- Modified etc.) for GET requests. Examples: Conditional GET requests
that fail the check." (From Microsoft)
AnonymousNetworkError; 200
"The most common cause of this error is a client disconnecting before a timeout expires in the storage service. You should investigate the code in your client to understand why and when the client disconnects from the storage service. You can also use
Wireshark, Microsoft Message Analyzer, or Tcping to investigate network connectivity issues from the client. " (From Microsoft) - a question here, this is an error, but why it is 200?
I wonder if these are the reasons that caused my problem?
For the first one, from my understanding, it is not actually an error, it just says that the version client cached is the same as server version. But when my client side sees this response, it thinks it is an error and throw an exception and thus no image
is shown? (I actually outsourced my client side, so I can only guess). I later tested with my browser to access these images and found that if I refresh the browser with the same URL of the image, I saw error 304 on the log but I still see the image. So I
guess this is not actually a reason for my problem.
For the second one, is it because my client side's timeout is shorter than the server side's timeout? But is the timeout a connection timeout or a socket timeout? what are the default values on client side and on Azure Blob? Or is it because the network
is not good? My Azure server is located in East Asia (Hongkong), but my users are in mainland China. I wonder if that could cause problem? But when a few users tested in China it is all good.
Many of the images are actually very small, just one to two hundred k. Some are just 11k.
I cannot figure out what is the reason...

Hi,
Does any people encounter this error when they access the small picture, if this issue is only caused by large picture, please try to improve the timeout, you can also monitor your storage account from the Azure Management Portal, this may be help us
to find out the detailed error information. see more at:
http://azure.microsoft.com/en-gb/documentation/articles/storage-monitor-storage-account/, hope it helps.
Regards

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

I can see my contacts in my iPad using the contacts app, but i cannot see a single contact being synced to the iCloud contacts section when i use my computer to log into the iCloud website?

i can see my contacts in my iPad using the contacts app, but i cannot see a single contact being synced to the iCloud contacts section when i use my computer to log into the iCloud website?

I am signed into the iCloud and contacts are turned on in the iCloud settings on my iPad. the iCloud account is checked in the groups area of the contacts settings. the calendar is turned on the same way and that syncs to iCloud...just not contacts.

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image. I have uninstalled and reinstalled but same result. How can I get this reset to show selected image and crop handles?

That has fixed it, all working fine now, thanks.

CANNOT SEE IMAGES INCERTAIN WEBSITES

Hi,
I cannot see some of the images in this website. Please help.
thanks

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Cannot see image when use sendRedirect

HI,
I have a little servlet that try redirct to external link
response.sendRedirect("http://wap.yahoo.com/");
I get the yahoo page but cannot see the image,
I look on the source of the page I got
<img src="/images/yahooicon.wbmp" alt="Yahoo!"/>
I cannot chage yahoo page :-(
any suggestions ?
Thanks

Hi,
The site http://wap.yahoo.com/ does not contain HTML. It contains WML scriptlets. It will not work if you are using a Internet browser. You need to have a Mobile browser to see the content properly.
I tried to redirect to http://www.yahoo.com/ and I am able to see the images in this site properly.
The problem is not with Yahoo site but the Browser you are trying to access it with. :D
Thanks and regards,
Pazhanikanthan. P

Cannot see image

No matter what I try I cannot see the 300x300 jpg I uploaded and described in my .xml file.
The xml is here:
http://www2.iteams.org/~meyerss/blog/wp-content/movies/mensbfast.xml
Could someone tell me what I'm doing wrong?
Dual 2.5G Mac OS X (10.4.5)

Hi Simon,
When you use itunes tags, you have to add some extra code to your feed. From the tech specs here:
http://www.apple.com/itunes/podcasts/techspecs.html
Defining Tags with the iTunes Podcasting Namespace
When using the iTunes tags, you must add a namespace declaration as the second line in your feed xml, like this:
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
The namespace declaration points to a document that defines the iTunes tags. Without the declaration, the tags are meaningless.

Using Firefox V4.0 I cannot see my emails/contacts in my Talktalk email account

Since upgrading to Firefox 4 on Windows 7 I can no longer see my emails/contacts when accessing my talktalk email account. I could when using Firefox V3

Download the app My Contacts Backup. Use this to backup the contacts on your phone as they are now as a vCard attachment to an email. Send this email to yourself and with the subject line "Original Contacts". Confirm that you have the email and that the backup file is attached. This is a precautionary backup and should not be needed. DONE
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted. DONE
Use the My Contacts Backup app a second time to back up the contacts on your phone and send this email to yourself again. This time use the subject line "Yahoo contacts". Confirm that you have this second email and that the backup file is attached. DONE
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), set this to iCloud. in contacts section, I have following options: Sort as, show as, my data and default account: in this option are: IBM Lotus notes (already checked) and Yahoo. Icloud option does not appear. Can´t continue.
Additional info:
In Settings>Mail,Contacts,Calendars>accounts I have icloud:
account:
Can I have there a yahoo account?
Thanks!
<E-mail Edited by Host>

Moved files between project, lost thumbnails, cannot see images anymore

Hi,
I moved 1902 images from one Project to another, but that didn't work very successful.
I have now all the 1902 still in the original Prject but I see no thumbnails and selecting it says that it cannot show the image (red background).
I can neither see them in the new project, well some ~5% I can see, but the rest are just grey icons. If I try to edit one, it shows nothing.
Is there a way to sort of "check" the library and rebuild the thumbnails?

I am running 1.1.2 but have not yet upgraded to 10.4.7
I cannot export those pictures, because they now completly disappeared after I started Aperture with cmd/opt.
When I looked into the aperture library the missing pictures had the CR2 file missing in the folder. So I doubt I would have been able to actually export the original file.

Cannot see image when scanning check for neteller OS X 10.10

I am trying to use my bank's electronic deposit app. When I scan the check I do not see the image and cannot submit it to the bank. So far I have to use my Windows PC to do this. Will HP provide full software for the MAC ever or must I keep using a PC forever so I can deposit my checks?

Hey there @iMACguy13!
Thanks for posting on the HP Forums!
I can see that when scanning cheques to your Mac running 10.10 your unable to see the image. I may be able to provide some helpful suggestions!
From what I can see there is no full feature software and drivers for the Photosmart C410a on Mac OSX 10.10. You should still be able to scan using the application in the Mac called Image Capture. Image Capture is located in the Application folder of your Mac. Using Image Capture your should see your scanner on the left side. It may be listed under shared. Once you select your scanner you should see settings on the right side for scanning. There is also an option to preview the scan before you save it.
Within Image Capture you can also change the DPI settings to increase the resolution of the image. This may help fix the quality issue!
Please post back and let me know how it goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Cannot see images occassionally: "Out of memory"

Hi,
I love Lightroom, but have the problem that is really interfering with my work. When I look at a larger collection of images (100+), every now and then the image area will be greyed out, and it will say 'Out Of Memory' in red (upside down and back to front) in the lower left corner.
This never happens when I am looking at thumbnails in Library-mode. It does happen when I am looking one image in Library-mode, in deverloper mode, and frequently in the Slide-show mode. Interestingly enough: when an image is not visible in Library-mode, chances are it is visible in Developer-mode and Slide-show (and vice-versa).
I use Lightroom for a lot of subtle retouching, so I can imagine the files are large. I would understand in Slide-show that the CPU simply doesn't have the time to render the image with all the alterations I apply to it -- but in Developer and Libarary-mode I can wait and wait, and the image nevr shows up. Then I go to Developer, and there it is!
I store my images on a seperate dedicated external harddisk connected through USB 2.0. I have browsed through the forum already, and found a solution in changing the windows pageview setting. I did this, but it made no difference. The problem still occurs with the same frequency. I have not installed LR 1.1 yet; the negative reports on this forum have scared me: I really don't need my database messed up right now.
Any suggestions you might have will be greatly appreciated!
Rogier Bos
Rotterdam, The Netherlands.

Guys,
Before I start this rant... I LOVE LIGHTROOM... but no more ADOBE, I cannot stand it anymore... sort out the OOM errors now, before I put my Lightroom CD into the shredder and then post this SHAM on every ADOBE forum I can find.
I have experienced the out of memory error 11 times today. I am working with 30,000+ images in Lightroom 1.1 on XP, but only looking through 58 files while doing an import of 100 files I get the "OUT OF MEMORY A2" error. This looks suspiciously like another of the, now famous, debug errors used by the developers to track the 'pain' issues. I would challenge Adobe that they know EXACTLY why this happens, a limitation in the programming techniques for their chosen development platform is highlighting issues in the Windows Memory sub-system and they cannot do diddly squat about it... they are just 'attempting' to clean up memory leaks where they can, by putting markers (A2) into the code. It would seem that they are down a creek without the proverbial paddle.
Tom Hogarty & ADOBE listen up... stabilize the memory issues stop listening to your marketing bods who are probably leaning over your shoulder as I write these words. You are going to suffer at the hands of Aperture and Capture One if you dont get your act together. I have used both of the above with little or NO errors at all.
Tell us ADOBE why do none of your engineers or developers talk openly about OOM errors, stop silencing them... lets get a discussion going there are some very capable developers out there willing to help for FREE! Are you mad... admit the problems and get people to help... Open Standards could teach you guys a thing or two!
Remember for everyone of of us that actually has the balls to complain, there are a 1000 who just sit and suffer not knowing what to do!
Fix the OOM issues before you do anything else this week!! Provide an interim 1.1.x update and make people happy they bought ADOBE and above all else remember at the end of the day these people PAY your wages.
...Now where is my Capture One license key...
Damon Knight
Photographer
London

Cannot see images in Project

OK, I just finished up importing all my images that were stored on DVD's into separate projects in Aperture. Now I am working on the tedious task of going thru and keywording the images, ranking them, etc,,,
Anyway, in one of my projects (DVD02) none of the images appear. I know they were imported, (In finder, I can view the contents of the Library, and then the DVD02 folder) So why aren't they showing up in the browser?
Thanks in Advance!

You haven't by accident typed anything into the search field next to the Query HUD in the Browser? (if you don't know where it is, see page 296 in the user manual).
Regards
Paul K

I cannot find images for contact sheet printing.

I have been printing hundreds of contact sheets and from time to time when I add pictures for contact sheet, I am unable to find the images I want even though they are open and in the project bin and in the same folder. I may find two but not the other two and so on. They all are the same size. Thanks.

You need to go into more detail about your problem. Perhaps you can provide screenshots of your dilemma with the software and provide more information that may help people answer your question. If not, you can always try reading the manual.

SICK Ranger Camera Toolkit - Cannot see Image on indicator

Hey,
I understand the SICK Ranger Camera toolkit is not supported by NI and is a 3rd party toolkit, but I'm wondering whether anyone has used the toolkit to create their own applications with a SICK Ranger Camera?
I am having troubles integrating the toolkit's functions to simply grab an image from the camera. I have run the examples on the example finder, and they return an error code 400226: Framegrabber is empty and the wait has expired (due to timeout or external wake-up)".
So I developed a very simple VI, which still doesn't quite work. I get all the camera status' and information about the camera so I know the connection is established, but for the image indicator, it comes up empty. Has anyone had this problem before? When I keep the image indicator as an I/O indicator, it does display the name of the image. But when I replace it with an image display, it displays nothing.
I was thinking it may be to do with a palette display type, but I've tried all of them, which results in a blank indicator.
In this image, you can see the Image I/O indicator is indicating there is an image reference
Same indicator, just replaced the I/O image indicator with a Vision Image display, and run the code... nothing appears?
I've attached the code for reference.
Thanks,
Hans T

Hi Ed,
Thanks for the response.
My main aim is to get the examples up and running before I develop my own code in LabVIEW. My initialisation cluster has the right settings, I set this to Image mode, instead of Measurement just to simplify things, as this will output a quicker response (as it needs no onboard processing) - the camera just functions as a camera where it outputs just a grayscale image.
You are correct in saying that the camera is connected over the network. It is a GigE standard camera and I have the camera directed connected to the ethernet port in the back of my PC. I have calibrated the device (Coordinator), configured the device (iCon Device Config) and used Ranger Studio to ensure the camera is working as it should.
I have already used highlight execution and gone through the necessary debugging steps to see what is going on. If I set dispose of image to false, theoretically, the image should still be in the IMAQ buffer. I monitored the buffer using a VI which showed me that the reference to the image was still there. However the image has a xres and yres of 0 (which is very strange!). But I know the camera is working fine as it is acquiring images in the 3rd party application, Ranger Studio, so there is nothing wrong with the connection between the PC and camera.

Cannot see images in Contacts

Similar Messages

Maybe you are looking for