Cannot see images on TV though AV Connection Kit

Hi,
I've just bought AV Connection Kit to plug my Ipod 30Gb 5G to my TV, but I just can hear the songs.
In an apple add I saw that, when a song is being played, the same image on the IPod screen can be seen on TV. Weel, I have connected everything (no misteries about it) and I always get a black screen on TV, although I can hear the songs.
Any help would be appreciated.
TIA,
Israel.

You can't display album/song artwork on the TV. Is that what you mean?
The only thing you can display are photos and movies.
I believe that there are some 3rd party docks that allow this, along with with the iPod menus.
I think Marantz make one.

Similar Messages

Azure Storage Blob error - AnonymousClientOtherError and AnonymousNetworkError (why cannot see images)

I have an mobile app and I put images in Azure Storage Blob. when tested by several of our own people (on test and beta), it is all good.
But when we released it to beta and had hundreds (maybe above one thousand) of users to use, lots of them report that they cannot see images. It happens on their iPhones and also on many different brands of Android phones. Sometimes, for the same image,
on one phone it is good, but on another it doesn't show.
When I check blob log, I saw a lot of errors, mainly these two:
AnonymousClientOtherError; 304
"Anonymous request that failed as expected, most commonly a request that failed a specified precondition. The total number of anonymous requests that failed precondition checks (like If- Modified etc.) for GET requests. Examples: Conditional GET requests
that fail the check." (From Microsoft)
AnonymousNetworkError; 200
"The most common cause of this error is a client disconnecting before a timeout expires in the storage service. You should investigate the code in your client to understand why and when the client disconnects from the storage service. You can also use
Wireshark, Microsoft Message Analyzer, or Tcping to investigate network connectivity issues from the client. " (From Microsoft) - a question here, this is an error, but why it is 200?
I wonder if these are the reasons that caused my problem?
For the first one, from my understanding, it is not actually an error, it just says that the version client cached is the same as server version. But when my client side sees this response, it thinks it is an error and throw an exception and thus no image
is shown? (I actually outsourced my client side, so I can only guess). I later tested with my browser to access these images and found that if I refresh the browser with the same URL of the image, I saw error 304 on the log but I still see the image. So I
guess this is not actually a reason for my problem.
For the second one, is it because my client side's timeout is shorter than the server side's timeout? But is the timeout a connection timeout or a socket timeout? what are the default values on client side and on Azure Blob? Or is it because the network
is not good? My Azure server is located in East Asia (Hongkong), but my users are in mainland China. I wonder if that could cause problem? But when a few users tested in China it is all good.
Many of the images are actually very small, just one to two hundred k. Some are just 11k.
I cannot figure out what is the reason...

Hi,
Does any people encounter this error when they access the small picture, if this issue is only caused by large picture, please try to improve the timeout, you can also monitor your storage account from the Azure Management Portal, this may be help us
to find out the detailed error information. see more at:
http://azure.microsoft.com/en-gb/documentation/articles/storage-monitor-storage-account/, hope it helps.
Regards

Apple TV cannot see my computer even though I have verified that both are set to the same home sharing network. I can see my music and Netflix but not photos.

Applw TV cannot "see" my computer even though I have verified that both are set to the same home sharing account. The router works OK as Netflix comes through as does access to music.

Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Homesharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image. I have uninstalled and reinstalled but same result. How can I get this reset to show selected image and crop handles?

That has fixed it, all working fine now, thanks.

SQL Developer - Cannot see list of tables in my connection

Hi - when I downloaded and started to use the SQL developer tool, once I connected, I could see all of the tables/columns in my connection on the left side of the tool, and I had my query panel, results panel, and SQL history stacked on the right. Suddenly something has changed, and I cannot see the list of tables, etc. in my connection anymore, so I have to rely on memory and SQL history to remember the table and column names. It has to be "hidden" somehow, but view-connections does not help, and trying to click and drag windows doesn't uncover it either.
Any suggestions?
Thanks!

Probably better to ask in the SQL Developer forum here: SQL Developer
I've been trying the version 2 beta though and it has quite a few bugs in. Table browsing is working fine for me, but all my functions and procedures have disappeared from the tree view. It does odd things with code formatting too.
I don't think it will be supplanting trusty old command line SQL Plus for me yet any time soon...

CANNOT SEE IMAGES INCERTAIN WEBSITES

Hi,
I cannot see some of the images in this website. Please help.
thanks

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Cannot see image when use sendRedirect

HI,
I have a little servlet that try redirct to external link
response.sendRedirect("http://wap.yahoo.com/");
I get the yahoo page but cannot see the image,
I look on the source of the page I got
<img src="/images/yahooicon.wbmp" alt="Yahoo!"/>
I cannot chage yahoo page :-(
any suggestions ?
Thanks

Hi,
The site http://wap.yahoo.com/ does not contain HTML. It contains WML scriptlets. It will not work if you are using a Internet browser. You need to have a Mobile browser to see the content properly.
I tried to redirect to http://www.yahoo.com/ and I am able to see the images in this site properly.
The problem is not with Yahoo site but the Browser you are trying to access it with. :D
Thanks and regards,
Pazhanikanthan. P

I can not see images on a HDMI TV connected my laptop Displayport

Dear all,
I need to connect the laptop to a HDMI TV and therefore I purchased a HP Display port to HDMI cable adapter P/N: 612873. It is not working.
I phoned HP service, they recommend to me to download the HP Softpaq download manager and update my laptop.
After doing this, still I can not see images on the TV.
I know the TV is working, because other laptops like Asus, Toshiba are connected to the TV and works fine.
Does anybody know what should I do?
Thanks in advance.
Ernest-bcn

@Ernest-bcn
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Cannot see image

No matter what I try I cannot see the 300x300 jpg I uploaded and described in my .xml file.
The xml is here:
http://www2.iteams.org/~meyerss/blog/wp-content/movies/mensbfast.xml
Could someone tell me what I'm doing wrong?
Dual 2.5G Mac OS X (10.4.5)

Hi Simon,
When you use itunes tags, you have to add some extra code to your feed. From the tech specs here:
http://www.apple.com/itunes/podcasts/techspecs.html
Defining Tags with the iTunes Podcasting Namespace
When using the iTunes tags, you must add a namespace declaration as the second line in your feed xml, like this:
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
The namespace declaration points to a document that defines the iTunes tags. Without the declaration, the tags are meaningless.

Time machine cannot see time capsule event though I have a green light

I have a green light on my time capsule but time machine on my macbook pro cannot no longer see the time capsule. i have gone through the procedures to find it and reset the time capsule, only again to get to the solid green light stage but time machine still cannot see it.
can anyone tell me what i am doing wrong? Thanks

I had the same problem this morning. Anyone have any ideas?

Cannot see images occassionally: "Out of memory"

Hi,
I love Lightroom, but have the problem that is really interfering with my work. When I look at a larger collection of images (100+), every now and then the image area will be greyed out, and it will say 'Out Of Memory' in red (upside down and back to front) in the lower left corner.
This never happens when I am looking at thumbnails in Library-mode. It does happen when I am looking one image in Library-mode, in deverloper mode, and frequently in the Slide-show mode. Interestingly enough: when an image is not visible in Library-mode, chances are it is visible in Developer-mode and Slide-show (and vice-versa).
I use Lightroom for a lot of subtle retouching, so I can imagine the files are large. I would understand in Slide-show that the CPU simply doesn't have the time to render the image with all the alterations I apply to it -- but in Developer and Libarary-mode I can wait and wait, and the image nevr shows up. Then I go to Developer, and there it is!
I store my images on a seperate dedicated external harddisk connected through USB 2.0. I have browsed through the forum already, and found a solution in changing the windows pageview setting. I did this, but it made no difference. The problem still occurs with the same frequency. I have not installed LR 1.1 yet; the negative reports on this forum have scared me: I really don't need my database messed up right now.
Any suggestions you might have will be greatly appreciated!
Rogier Bos
Rotterdam, The Netherlands.

Guys,
Before I start this rant... I LOVE LIGHTROOM... but no more ADOBE, I cannot stand it anymore... sort out the OOM errors now, before I put my Lightroom CD into the shredder and then post this SHAM on every ADOBE forum I can find.
I have experienced the out of memory error 11 times today. I am working with 30,000+ images in Lightroom 1.1 on XP, but only looking through 58 files while doing an import of 100 files I get the "OUT OF MEMORY A2" error. This looks suspiciously like another of the, now famous, debug errors used by the developers to track the 'pain' issues. I would challenge Adobe that they know EXACTLY why this happens, a limitation in the programming techniques for their chosen development platform is highlighting issues in the Windows Memory sub-system and they cannot do diddly squat about it... they are just 'attempting' to clean up memory leaks where they can, by putting markers (A2) into the code. It would seem that they are down a creek without the proverbial paddle.
Tom Hogarty & ADOBE listen up... stabilize the memory issues stop listening to your marketing bods who are probably leaning over your shoulder as I write these words. You are going to suffer at the hands of Aperture and Capture One if you dont get your act together. I have used both of the above with little or NO errors at all.
Tell us ADOBE why do none of your engineers or developers talk openly about OOM errors, stop silencing them... lets get a discussion going there are some very capable developers out there willing to help for FREE! Are you mad... admit the problems and get people to help... Open Standards could teach you guys a thing or two!
Remember for everyone of of us that actually has the balls to complain, there are a 1000 who just sit and suffer not knowing what to do!
Fix the OOM issues before you do anything else this week!! Provide an interim 1.1.x update and make people happy they bought ADOBE and above all else remember at the end of the day these people PAY your wages.
...Now where is my Capture One license key...
Damon Knight
Photographer
London

Moved files between project, lost thumbnails, cannot see images anymore

Hi,
I moved 1902 images from one Project to another, but that didn't work very successful.
I have now all the 1902 still in the original Prject but I see no thumbnails and selecting it says that it cannot show the image (red background).
I can neither see them in the new project, well some ~5% I can see, but the rest are just grey icons. If I try to edit one, it shows nothing.
Is there a way to sort of "check" the library and rebuild the thumbnails?

I am running 1.1.2 but have not yet upgraded to 10.4.7
I cannot export those pictures, because they now completly disappeared after I started Aperture with cmd/opt.
When I looked into the aperture library the missing pictures had the CR2 file missing in the folder. So I doubt I would have been able to actually export the original file.

Cannot see BEx Query in Creating Universe Connection

Hi,
I have a BEx query based on Multiprovider
I did check the box "Allow External Access to this query" from "Release for OLE DB for OLAP".
When I come to Designer create a connection, that query does not show up.
This has happened with some other query create on that Multi Provider too.
I checked the query for operators.
Note: Queries containing formulas with the operators %RT, %CT, SUMRT, SUMCT and LEAF cannot be released for OLE DB for OLAP. Mentioned in
http://help.sap.com/saphelp_nw04/Helpdata/EN/07/0ab63c71f41d5ce10000000a114084/content.htm
I cannot explain why.
What could be possible reason?
Thank you,

Check to make sure the BW role that is used has auth obj S_RS_COMP that provides Display access to the InfoProvider that your query is built on. The userid that runs the Bex query would also needs Execute access to that query. You may need to get your SAP security person to run a trace when you start designer and try to create your connection if you find that your BW role already has the auth I mentioned.
SAP made a recent change with 7.0 SP22 / 7.01 SP5 that applied BW security to the display of queries in the Designer. We could no longer see out BEx quereis in Designer after we applied SP22 until we added Display access to the role we use for our Business Objects service acct we setup.
From SAP Note 1364715 - MDX: Authorization check of BEx queries
Symptom
You use the BAPI "BAPI_MDPROVIDER_GET_CUBES" to read the BEx queries
available in the BW server that have been released for OLE DB for OLAP
(ODBO) (indicator "Allow External Access to this Query" is set in the Query
Designer).
Authorizations are ignored.
Cause and Prerequisites
The authorization check is ignored.
Solution
The authorization check is performed for the user that calls the BAPI. If
an RFC is used to call the BAPI, the check is performed for the RFC user.

SICK Ranger Camera Toolkit - Cannot see Image on indicator

Hey,
I understand the SICK Ranger Camera toolkit is not supported by NI and is a 3rd party toolkit, but I'm wondering whether anyone has used the toolkit to create their own applications with a SICK Ranger Camera?
I am having troubles integrating the toolkit's functions to simply grab an image from the camera. I have run the examples on the example finder, and they return an error code 400226: Framegrabber is empty and the wait has expired (due to timeout or external wake-up)".
So I developed a very simple VI, which still doesn't quite work. I get all the camera status' and information about the camera so I know the connection is established, but for the image indicator, it comes up empty. Has anyone had this problem before? When I keep the image indicator as an I/O indicator, it does display the name of the image. But when I replace it with an image display, it displays nothing.
I was thinking it may be to do with a palette display type, but I've tried all of them, which results in a blank indicator.
In this image, you can see the Image I/O indicator is indicating there is an image reference
Same indicator, just replaced the I/O image indicator with a Vision Image display, and run the code... nothing appears?
I've attached the code for reference.
Thanks,
Hans T

Hi Ed,
Thanks for the response.
My main aim is to get the examples up and running before I develop my own code in LabVIEW. My initialisation cluster has the right settings, I set this to Image mode, instead of Measurement just to simplify things, as this will output a quicker response (as it needs no onboard processing) - the camera just functions as a camera where it outputs just a grayscale image.
You are correct in saying that the camera is connected over the network. It is a GigE standard camera and I have the camera directed connected to the ethernet port in the back of my PC. I have calibrated the device (Coordinator), configured the device (iCon Device Config) and used Ranger Studio to ensure the camera is working as it should.
I have already used highlight execution and gone through the necessary debugging steps to see what is going on. If I set dispose of image to false, theoretically, the image should still be in the IMAQ buffer. I monitored the buffer using a VI which showed me that the reference to the image was still there. However the image has a xres and yres of 0 (which is very strange!). But I know the camera is working fine as it is acquiring images in the 3rd party application, Ranger Studio, so there is nothing wrong with the connection between the PC and camera.

Cannot see images on TV though AV Connection Kit

Similar Messages

Maybe you are looking for