Cannot see in finder Canon raw 5D III thumbnails (image, size, etc)

Any hint? Thanks

I'd first update to 10.6.8 and also do any RAW software update as well.
http://support.apple.com/kb/DL1513
and then see if they appear in Finder.

Similar Messages

ITunes is backing my iPhone, however it cannot see or find those backups?!

Hello
I'm running the latest version of iTunes with my iPhone 4. Until recently (but I"m not sure when), I was able to back up and restore fine. However there is now a problem. Please help as I've spent hours chasing leads on Google and nothing has worked!
Notes. This is on my iMac - my Windows Laptop doesn't have this problem, I checked. But I hardly ever use that machine, and need it to be working on my Mac really.
So:
When I hit back up in iTunes, it backs up ok. The files are there in the proper folder in MobileSync and there doesnt appear to be a problem. But (its as if) iTunes cannot see the backup. The backup is not listed under Devices in preferences, in fact nothing is. Plus on Summary Page, is says "Last backed up to this computer: Unknown" (Although I can see the last back up there in the folder). I also tried clicking "Restore Backup" on the Summary Page and did a right click on iPhone in devices and selected "Restore from backup". However, when I do either of these, nothing happens and I mean nothing.
NB. I've also tried Backing up to iCloud and this too seems not to work.
Any ideas would be great, am willing to try anything!
Thanks

Found this article
Troubleshooting: iPhone Backup Problems
written by: Shane Burley • edited by: Simon Hill • updated: 9/11/2010
Have you run into the problem with iTunes not being able to backup your iPhone? Here is a look at how to troubleshoot different issues if you have.
Back-It-Up
Part of what happens when you sync your iPhone to iTunes is that iTunes will back up your iPhone, saving some of the content and settings that are on the device. This iPhone backup is especially important when you are updating your iPhone, such as to a new iOS. This is done so that if anything happens to your iPhone, or if you need to restore your iPhone, you can maintain your media, contacts, iPhone apps and the rest. Just like everything else with the iPhone technology, sometimes there are problems. You may find that iTunes could not backup the iPhone, and there could be a whole range of reasons for this. Here are some ways to troubleshoot the problem if you do find that iTunes could not backup the iPhone.
Manual Back Up
If you find that the automatic iPhone back up is not working with iTunes it doesn't necessarily mean that iTunes could not back up your iPhone. First, you need to make sure that there are no internal software problems, iPhone apps, like firewalls, that are going to interfere with iTunes functions. Go ahead and locate your iPhone under the Devices heading in iTunes and right click it. From the right click menu select Back Up, which should initialize it. This is also the first option you should take if you get a "backup session failed" message when trying to back up the iPhone.
Delete Old Backup
If you find that iTunes persistently cannot backup your iPhone then you may want to delete the old backup files, which may be causing the problem. Go to the folder Preferences –>Devices –> Delete Backup and identify these files, and you should start by copying them to another location just in case you need them if there is an iPhone content problem. The backup files are going to be in:Users/[username]/Library/Application Support/MobileSync/BackupWhen you are working on your Mac computer. If you are working on a Windows based PC then they are in:C:\Documents and Settings\[username]\Application Data\Apple Computer\MobileSync\Backup

Viewinging RAW files as thumbnail images when opening from Photoshop - not working?

I have just installed Photoshop CC on my new Windows 8.1 OS computer and when I try to open one of my RAW files into Photoshop from the Photoshop 'open file' menu item I can only see file icons rather than the thumbnail pictures that are in the folders? I can view the thumbnails just fine from Bridge but not when opening directly from Photoshop? I can view all jpg's but no RAW files (both Canon and Sony RAW). I tried installing the Microsoft Camera Codec for Windows 8.1 but it won't install - error message says "not intended for this operating system" in spite of the fact that it explicitly states it is for Windows 8.1? Any ideas on what to do to be able to view the thumbnail images?
Thanks in advance.

I have just installed Photoshop CC on my new Windows 8.1 OS computer and when I try to open one of my RAW files into Photoshop from the Photoshop 'open file' menu item I can only see file icons rather than the thumbnail pictures that are in the folders? I can view the thumbnails just fine from Bridge but not when opening directly from Photoshop? I can view all jpg's but no RAW files (both Canon and Sony RAW). I tried installing the Microsoft Camera Codec for Windows 8.1 but it won't install - error message says "not intended for this operating system" in spite of the fact that it explicitly states it is for Windows 8.1? Any ideas on what to do to be able to view the thumbnail images?
Thanks in advance.

10.9.3 finder cover flow doesn't save image size

I went from Snow Leopard 10.6.8 to Mavericks 10.9.3. Everything went ok, but I have one annoying problem though.
Everytime I open a cover flow window in Finder I have to resize the image preview section. The Finder window size is saved,
but not the actual image size of the cover flow. It always goes back to a default, very small, size everytime I reopen the Finder window.
Didn't have this problem in Snow Leopard. It worked great. I just know one other person with the same problem. He just bought his MacBook Pro with Mavericks
and I am on a late 09 MacBook. So it shouldn't be a problem with just my Mac and Mavericks.
So my question is;
Will there be any solution to this soon? Maybe a program update to be released, regarding this issue?
Thank you for any feedback!

Ok, more information for anyone that might care. The wake-up seems to be the familiar dark wake in order to go into hibernate mode. Except now, it's a death wake. Looking at the logs, I see that it happens exactly 70 minutes after sleeping, even though hibernatemode = 0 (which shouldn't hibernate at all!)
So my power settings look like this:
Currently in use:
standbydelay         4200
standby              1
halfdim              1
hibernatefile        /var/vm/sleepimage
darkwakes            0
gpuswitch            2
disksleep            10
sleep                10
autopoweroffdelay    14400
hibernatemode        0
autopoweroff         1
ttyskeepawake        1
displaysleep         2
acwake               0
lidwake              1
standbymode is 70 minutes, what a coincidence. I'm going to try setting it to 0 and see what that does.

Can't access title inspector. I can only see the left half that lists the names of all the settings but cannot see or adjust any of the settings like font size or color. I can click on a triangle and expand a setting but can't see setting or change it.

This screen grab actually cuts off the right side a little bit but this is basically my issue. I can move the whole window but I still can't see or access the parameters for each of the title settings. Is this just a bug I have to live with until Apple fixes it or does anyone have a solution?

I'm on a MacBook Pro with a 15.4" screen. Resolution = 1024x768 (stretched).
I've tried moving the window but it cuts off the inspector in the same place and I am unable to resize the width of the window.

JDeveloper 11g:Cannot see all the content of a page, because of size screen

Hello all!
I am developing an application with JDeveloper 11g, using ADF 11g.
I created a page (all content is in a PSL), but when I deploy the application, if someone has a small screen, he can not see all
information on the page.
I want to know what I can do for him to descend, or turn left to see the entire contents of the page.
Thank's,
Nystan

It kind of depends on the layout component you are using.
A panel stretch layout should be able to adjust the size - unless you hardcoded values into its size.
You can use a panel group with layout set to scroll to enable scrolling of the page content.

Aperture Canon 5D MK III

I am getting unsupported images error. Is this because an Aperture RAW update is needed to support the new camera?

See his thread Canon 5D Mk III - RAW update?

Mac OS 10.6/Time Machine cannot 'see' HD to re-install or restore

Upgraded my Mac Mini to Snow Leopard a couple weeks ago and had no problems. Then yesterday the computer froze up (the mouse still moved and icons in the dock expanded with the mouse but NOTHING was acknowledged when clicking to tabbing to any commands; could not even click from screen to screen for various functions that were currently open ... yet the mouse moved fine). Tried to restart computer and all I get now is a gray screen with a flashing file folder with a question mark in it.
Have tried all attempts listed here and in Support to (1) re-install Mac OS X 10.6 from the original disk, and (2) restore my computer from my Time Machine. Have tried many, many times now for both options and in ALL cases the computer cannot see or find my computer. The only disks it can find to re-install or re-store to are the 2 external hard drives I have. If I disconnect these, the computer can find NO disks to re-store to. (I've now let my system search for disks for over 3 hours this time around, and it still cannot find any disks to install to.)
So what's happened to my Mac Mini and "where" has this disk gone to? Why can't my Time Machine or Mac OS X installation disk find (or see) my Mac Mini?
(Really do need a new computer and was seriously thinking about just buying the new iMac this week, so maybe this is the sign. But would still like to get the last few files off my Mac Mini that I was working on when it crashed -- don't think Time Machine actually had time to back these up ...)
Cheers, and thanks for any suggestions and help!

Karl
It sounds like you are having trouble with your internal Hard Drive.
Whilst this is quite serious, sometimes you can fully recover from the situation, depending on what happened.
One of the most useful and reliable rescue utilities is DiskWarrior:
http://www.macupdate.com/info.php/id/11707/diskwarrior
If you are lucky it may be something as simple as a damaged HFS+ wrapper, which can be repaired and have you back up on your feet again in relatively short order.
It pays to periodically check the *S.M.A.R.T. Status* of your drive, at the bottom of *Disk Utility.*
This is a self diagnosis function that may indicate impending problems. However if the disk has sustained physical damage, such as caused by a hard knock, nothing will redeem it.
Peter

Cannot see instrument editor

New to this version of Logic Pro, I am now using version 8. As you know, when I click on EXS24 button under I/O it opens the semi-transparent gray window that says Inst 1 which is my EXS24. In the gray window I see that there are two options under view: controls and editor. When I choose controls I see all of the sliders and settings. However, when I click on editor, the gray window is blank (it does say EXS24 at the bottom) but shouldn't I see the instrument, kind of like I used to see it in Logic Pro 7? Almost like a pedal board view?
Help! I prefer to see the instrument as I used to.
What am I doing incorrectly?
Any assistance will be much appreciated!!

Thanks.
Actually, I'm already running 10.6.7, just had not updated my profile. Might it have anything to do with the fact that I have both Quicktime 7 and X on my computer? It's weird, all aspects of the program work fine, I just cannot see any interfaces for the built-in interfaces, EXS24, EVD6, etc.
But your Quicktime idea has me wondering if two versions might be an interference. For the record, I have temporarily trashed both versions individually to see if that would work, but to no avail.
Really frustrating. Let me know if you can think of anything else. I've already reinstalled, so I don't know that that will make a difference.

Have CS6, but my Mark 5D III CR2 images won't load, can't install plug in 6.7!

I just upgraded to CS6, but my Canon Mark 5D III CR2 images won't load, and everytime I try to download the 6.7 plug-in, it tells me it is "not for me." Help!

Get the ACR 7.1 RC (beta) at Labs.Adobe.com.

Opening jpgs as raw... image size

My office color corrects thousands of images per day for newsprint. These come in mostly as jpgs and some tifs and eps files. Most of these need a lot of color correction work, and I've found that opening jpgs with the RAW dialogue box and tweaking them there can be a huge time-saver (one menu with a bunch of sliders, versus opening curves, shadow highlight, hue/sat, color balance, etc.)
However! There are two things preventing us from utilizing the ability to open jpgs and using the raw dialogue box:
1. Image size. We are dealing with images from several customers who need us to maintain their original image size and dpi, whatever that may be. Other customers want us to maintain the width/height and rasample the image down to 200dpi. (example: take this 3x5" @ 956dpi and make it 3x5" @ 200dpi) If I open one of their images in raw, I don't know what the original width/height were because the file has been resized to whatever I used on the last image. I've noticed it defaults to 240. The original jpg dpi changes with each image we get. Is there any way to make the raw dialogue box not change the image size? Which leads me to...
2. Once I've opened a jpg using the raw dialogue box it will always open up again in raw (always changing the image size.) If I want to just open my jpg as a regular image in photoshop, I have to go to camera raw preferences and disable the ability to use raw on jpgs. Is there a faster way to ignore the raw settings on a jpg once it has been altered as raw?
So this is why we don't use raw, even though it'd be a huge advantage for us to be able to make these color corrections. If anyone has any ideas how to get around these, or even an easier workflow, I'd appreciate it!

For #1, if you look at the image in Bridge you can note the dimensions and resolution...you would then need to put that same resolution in the ACR resolution field.
For #2, no...as you note the ACR Preference controls whether or not Camera Raw will be used to open the image. You can use the Shift key when double clicking in Bridge to open the image directly into Photoshop and bypass the ACR dlog, but Camera Raw will still be used if it's set to be used in the Preferences...
You'll need to keep your image resizing just in Photoshop because Camera Raw is not designed to do that sort of resize/resampling...it's designed first and foremost as a raw processor and later added the ability to open and process camera JPEGs and TIFFs. Putting those kind of controls into Camera Raw wouldn't make sense since the end result of an image opened into Camera Raw is supposed to be an image processed and opened into Photoshop. So, what you are wishing for is really outside of the scope of the development design...sorry.

When will finder show a thumbnail or preview of the raw file images from the Canon 5d mark iii?

I am wondering if anyone has an update on when finder will show a thumbnail for the raw files from the Canon 5d mark III? I've done all the updates possible and nothing has changed, I can't do a quick preview either, it just shows the extension image, not the actual image taken. (The symbol for crw).

I had the same problem for a Canon EOS-1D X and finally got around it by viewing the images in Adobe Bridge. Worked beautifully!

I cannot see Nikon D610 raw file preview in Finder.

I can see and develop my Nikon D610 RAW file in iPhoto (latest version v 9.4.3) but surprisingly I cannot see them in the Finder (preview, icon preview, etc).
I have tried to fix it by downloading the latest Digital Raw upgrade file (5.0.2 and even 5.0.1) but the setup program refuses to launch arguing I don't have iPhoto 9.4.3 or Aperture 3.4.5
But I have iPhoto 9.4.3. I have even redownloaded it from Appstore and reinstall it but without sucess.
And to add to the complexity, I tested the NEF file with another mac (same OS version, same iPhoto version) and it works well. So I don't understand what is going wrong with my iMac
Any idea how to solve this issue ?
Many thanks in advance for your help
Emmanuel

Problem solved. My iPhoto application was in a folder, which is preventing Digital Raw update from seeing it and therefore preventing the install.
After having put back iPhoto into the main Application folder, I have been able to reinstall digital raw update (5.0.1 and then 5.0.2, as 5.0.1 deals with my d610 and 5.0.2 is the latest version). Once install, I can see the preview in the finder as I wanted

Canon 5D Mark III Raw Files Not Viewable in Finder for Snow Leopard 10.6.8

System specs:
Computer: Mid 2008 Mac Pro - Dual Quad Core
OS: OS X 10.6.8 (includes the most recent Digital Camera Raw Updates)
Camera: Canon 5D Mark III
Problem:
Finder can not preview the thumbnails from this camera. While not that big of a deal (I can use Lightroom, Bridge, etc to view these) it is a bit of an annoyance when transfering files around from one volume to another.
According to this Apple support page - http://support.apple.com/kb/HT3825?viewlocale=en_US&locale=en_US - I may need to update iPhoto, in order for the Digital Camera Raw Updates to work (specifically 3.12 from last year that addressd the 5D3's raw files).
As a pro photographer, I have ZERO use for iPhoto. But, I would be willing to spend the $15 for the newest version of iPhoto, if I knew that would solve the Finder thumbnail problem.
I would love a definitive answer, without having to call Apple and paying the "per-incident support fee."

I manually installed the latest RAW update (3.13 I think - for 10.6.8) .... worked for me.
(auto-update didn't do **** about raw update)
now aperture and os-x (10.6.8) show the 5dmk3 raw's.

Aperture 3.1 can't find/see my Canon RAW files when importing

Aperture 3.1 cannot see my CANON RAW files when doing import!!!
Do I really have to re-reference each image in the library if I have moved the library to a different volume? Images are not moved to the library, only referenced.

You don't want to re-import files if you move the library. You just need to reconnect the masters.
If you moved the whole thing over at once it should be easy; if you monkeyed with the folder names you could have a lot of work on your hands.

Cannot see in finder Canon raw 5D III thumbnails (image, size, etc)

Similar Messages

Maybe you are looking for