Cannot see kids safari data anymore?

My wife and I have two children and we have always been able to see the safari searches they are doing.  We recently had our niece move in and we can now see her safari searches, but not our childrens.
My wife and I share the same user name.  We recently set up family sharing.  My kids have ipods 5th Gen and my niece has a 4th Gen Ipod.
Can I please get a little insight as to how I get this information back?

My wife and I have two children and we have always been able to see the safari searches they are doing.  We recently had our niece move in and we can now see her safari searches, but not our childrens.
My wife and I share the same user name.  We recently set up family sharing.  My kids have ipods 5th Gen and my niece has a 4th Gen Ipod.
Can I please get a little insight as to how I get this information back?

Similar Messages

  • Excel - Cannot see any new data in Excel Workbook

    Hi There,
    Wonder if anyone can help, we have a .xlsx file, we have it setup so that only one person at a time can edit the workbook.
    When a colleague edits some data and saves the change, I go into it but cannot see the new data. I then do the same but she cannot see the changes and neither can a 3rd colleague. In effect, whenever any one
    makes a change in the workbook, no one else can see the new saved data that has been added. 
    The work book is not protected. It is stored on a server, all users are running Office 2013 apart from
    1 who is using 2003, but it doesnt matter as even if a change is made using office2013, another office 2013 client still can't see the change.
    It doesn't seem to happen with any other workbooks.
    Tried open and repair which didn't work. Also tried saving a new version of the workbook, this works for a while but then the issue comes back on the new version.
    Any ideas, as currently we keep having to save new versions of the workbook.

    Hi,
    What's the extension of this particular file ?Try another file format to test this issue.
    Did you get any message when try to save the document? Also does this problem happens when use the 'save as' option within Excel to save the file?
    Also try to download the excel file to local driver, update the Excel file,then upload it to the server.
    Wind Zhang
    TechNet Community Support

  • Please help: User cannot see webi report data

    Hi,
    I've got a wired problem here in my webi report. Basically I am located in Singapore and produced a webi report for our user in UK. The report looks totally fine with all the data shown correctly. But when our report user logged into the dashboard from UK, she could only see partial data and some of the information are missing(blank cells in the report).
    To verify the cause I've done the following test:
    1. I remote control her computer and log into dashboard using my account, the result is I get same problem and I cannot see some of the data.
    2. I let her remote control my pc and log into dashboard using her account, she no longer has this problem and can see complete data.
    We use same version of IE, same JAVA version. And the report data is not time sensitive, so different time zone might not the possible cause.
    This problem is killing me. Can anyone please help and let me know any possible solution? Thanks so much.
    Edited by: Sinsin Tan on Jul 14, 2010 5:59 AM

    Hi Sinsin, what version of BusinessObjects are you using? Is it XI 3.1?
    I don't know if it is the same problem or not, but I have seen that before when a user cannot view the data, change the font and/or background color and the data becomes visible. Reinstalling the client fixed that problem. If you couldn't figure out the root cause, you might want to consider this option.
    If you are using the BusinessObjects tool, you should join [ASUG|www.asug.com]

  • I cannot see all the data in target disk mode

    I have an issue where my MacBook pro is not booting into the Yosemite.  I see the progress bar hangs at about 45% on the startup screen. I called Apple support and they asked to use the target disk mode to connect to my mac and then copy data like that. I am using the same technique but I am not seeing all the data under users. My data under the folder users had another users data that I cannot see.
    How can I see my data for all the other users? Help please!!!

    Could be that the the data or directors on the HD are corrupted.
    - Copy all data you can
    - Try cloning the whole disk to another disk before you attempt recovery methods.
    - Try repairing the HD via Disk Utility
    - Try a data recovery program
    http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/

  • Cannot see view's data from PC

    This is a weird thing! If i use sqlplus from my pc i cannot see the data from a view but if i login to the linux box there i can see the data. What can this be?
    Any help will be very much appreciated.
    Octavio

    Start from first principles.
    Log in as the owner of the view and check you can see the data.
    Check that the view source is correct and noone made any changes. Its just possible, a change was made between you querying the view on the server and from your PC.
    if you're on 10g try and sleect the data as of 60 minutes ago,
    eg select * from view_name as of timestamp sysdate-1/24
    I ahve no knowledge of oracle apps, but you just have to apply proper problem solving techniques.
    Ie query the view
    Run the query
    Eliminate conditions
    Check data in tables (Doing this first can save a lot of time)
    Find out if anyone changed anything

  • Cannot See Multiple Cover Art Anymore

    Cannot see multiple cover artwork since I upgraded to iTunes 10.5.1. I used to be able to see more then one art cover for a song. Now there's no arrow button in the artwork box to scroll through other covers, even though the multiple cover art is in the info box of the song Track.

    iTunes 10.6 did not restore the scroll arrows in the art work box either. The scroll arrows appear briefly when you
    add additional art work. I wish Apple would say whether or not they plan to restore this feature. I have invested a l
    lot of time and effort in adding cover art and liner notes to my iTunes library and I am certainly not the only
    one who has. I don't understand the lack of a fix or the silence about the loss of this feature.  Anyone out there
    have any thoughs about this?
    ---David Cantrell
    <Email Edited by Host>

  • I cannot move the safari screen anymore. What's up?

    About a week ago when checking out Google on Safari my screen turned somewhat grey and I could not move it up and could not open the items anymore.  What did I do wrong? I am a senior citizen and not very computer savy.
    Also,  whenever I sent a e-mail now it also appears in my in basket.
    Can anybody help before I trott down to the Apple Store?
    Thanks

    For Safari try clearing its cache : Settings > Safari > Clear Cache (and Clear History) - it's Clear Cookies And Data on iOS 5
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    For Mail, have you got Settings > Mail, Contacts, Calendar > Always Bcc Myself set 'on' ?

  • Inbox preview problem - cannot see subject, from, date etc but can read emails..

    Hello All
    I am using Thunderbird on a Mac, this problem began yesterday.
    The preview section of my inbox is not showing that is things like subject, from, date etc all I am seeing is blank rows but I can still click on these rows to see my messages.
    I have attached a screenshot to show the problem, I am quite baffled by this.
    I am running 4 inboxes but only this one has the problem, it is through imap, (screenshot attached of the inbox properties)
    Any help would be greatly appreciated.
    Thanks

    I found another thread that had userChrome code in it that I was able to modify how I wanted it. :)

  • My 2010 cannot see the external HD anymore.

    Hi,
    I bought a new LaCie 1TB and hooked it up to my 2010 MBP. Launched the setup assistant and formatted the drive. The format crashed and I was told to check my usb cable. Since then, I have not been able to see the drive. I can connect other USB devices without problem. I have tried all three USB ports. The external drive is recognized by all of the other macs that we own. I have zapped the PRAM a few times.
    Following the original crash, the drive was successfully formatted from a different mac.
    Any suggestion will be appreciated.

    Is this a "bus powered" drive or does it have its own separate power supply, Touched?
    Does it have a firewire interface as well as USB?
    Given that you say the USB ports are working with other devices, and the drive works with other computers, the most likely explanation sounds like inadequate power supply when connected to the MBP.
    If you have a firewire option on the drive, then try that instead. (Firewire provides much more reliable power supply to eternal drives than USB and is faster as well). If you don't have firewire, and the drive is bus powered, use a "Y" cable to connect it to two USB ports rather than just one, or attach an independent power supply.
    Cheers
    Rod

  • Cannot see encrypted disk image in ML

    I created an encrypted disk image (password protected folder) through Disk Utility in Snow Leopard. However, now that I have upgraded to Mountain Lion, that folder appears to have vanished or is invisible. All my other file are intact but I just cannot see this encrypted folder anymore.
    Anyone else having the same experience or able to offer some pointers?
    Thanks,
    Peter

    There would be no reason for Mountain Lion to hide it. That's not normal behavior. Mountain Lion follows the same rules in this regard that Snow Leopard did. But, you can certainly check to see if it has somehow become accidentally hidden by entering the following command into the Terminal (but don't press return yet):
    ls -al
    Make sure there's a space at the end, and then drag the folder in which the .dmg file used to reside onto the Terminal window. This will enter the path to that folder in the command. Now switch back to the Terminal and press return. Do you see the .dmg file in the listing? If so, copy and paste the Terminal output into a message here, and I can give you a command that will show that file again.
    If it's not there, it must have been accidentally deleted. (Again, not normal behavior, so most likely either it was accidentally deleted by you or someone else who uses that machine or the hard drive is badly corrupt and files are going missing.) Do you have a backup of that file?

  • Cannot see context menu for XML messages with Safari and Google Chrome

    Hi All,
    I am unable to see Context menu with the option of Create, Edit, Delete etc. for KM messages. This problem persists with Safari, Chrome and IE9 browsers. This thing works fine on IE7 and IE8 browesrs.
    On clicking  History and Options buttondoesn't perform any action i.e. we cannot see the list of options when clicking on those. This problem also persists with the above mentioned browsers.
    Also, with IE9 , I am unable to create New message when clicking on New button. The XML form doesnt open on the button click.
    The portal version I am using is EP 7.0.
    Can someone help me out with this?
    Thanks a lot in advance.
    Regards,
    Archana

    Hello Archana,
    You should check the PAM to see if your browser is supported with your current EP verison.
    http://service.sap.com/pam
    Regards,
    Lorcan.

  • Cannot see System DSN ODBC Data source (however user DSN is Ok)

    We have installed BO 6.5.1 on Windows 2008 R2 64 bit and set up ODBC Data source to the existing SQL server.
    When we try to set the BO up (Administration>Safe recovery etc.), in the "Database middleware selection" - "Define new connection" - "Data source name" we cannot see the System DSN name that we've created in the Window's "ODBC data source administration" control panel applet. If we create a User DSN, we can see it ok but it works for one user only (as it should).
    So, in a nutshell, if we setup a User DSN it works fine but if we setup a system-wide System DSN BO cannot see it. I've got no idea why...
    Can anyone point me to the right direction, please?

    Are you using the ODBC Administrator from control panel?  If so, try launching this instead:  odbcad32.exe from start/run.
    This is the 32-bit ODBC administrator and since we are a 32-bit application, a 32-bit DSN will need to be configured.
    Here's another forum thread that may be helpful:
    http://social.msdn.microsoft.com/Forums/en/sqldataaccess/thread/49e206c3-f4f8-4757-8990-71b93120d2bc
    and this one too:
    http://forums.techarena.in/windows-x64-edition/698703.htm
    Thanks
    Jonathan

  • When I go into my email account through Safari, I cannot see all of my messages.  26 may show on the screen but it says I have 32.  However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

    When I go to my email account through Safari, I cannot see all of my messages.  It says there are 34 but I can only see 26.   However, at the bottom right  the arrows to go to the next screen are not highlighted?  I also cannot scroll any further down.  Does anyone know how to scroll down to see all of my messages?  I use Travel-net Communications as my email provider (Ottawa, On, Canada).

    hey ,
    if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

  • I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

    I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

    dglenn9000 wrote:
    I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
    Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

  • HT1418 I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar.  Only repeated items (birthdays, anniversaries, etc.) are visible.  Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?

    I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar.  Only repeated items (birthdays, anniversaries, etc.) are visible.  Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?
    Thanks

    Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
    - To use the TC as a router or as an external HD.
    The difference between WPA and WPA 2 are:
    - They are two kinds of internet connection.
    WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
    If you need any help or if you find some difficult setting up it you can contact Apple Support.
    I am sure that they can help you with that.
    I am sory for the delay. I holpe that you solve your issue.

Maybe you are looking for