Cannot see name of who texting me

hoi can anyone help. i cannot see name of person who texting me on blackberry 8800. all help greatly appreciated

Okay, this should solve it for you. I'm not sure which Operating System you're running, so here are instructions for OS 5 & 6.
OS 5: From your homescreen, click the SMS and MMS icon, press the menu key and select Options>General Options. Beside Display Name, make sure it says Yes. Press the menu key once again and select Save.
OS 6: From your homescreen, click Text Messages, press the menu key and select Options. Make sure the box beside Show Names is checked. Press the menu key again and select Save.
That should do it. Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

I cannot see any of my text boxes in the vertical view.

I just checked the first chapter of my iBook in the vertical display. I cannot see any of my text after the section introduction page. All of it is written in text boxes that I created. I can see all of my widgets and text in the standard horizontal view but when I switch to vertical all I can see is the section introductions and the widgets off to the left hand side. This is a guide to surface palpation. Each page is its own set of instructions instead of being one long piece of continous writing. Is there a way to reformat my text boxes so that they are visible in the vertical view without starting over?

The portrait mode only supports the flow of text (and pictures pasted into the text), and widgets (they will all be positioned on the left).
You need to design in landscape mode knowing how the portrait mode works. Text boxes won't show up in portrait mode.

I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu. I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle. Is there a way to do this?

I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu. I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle. Is there a way to do this?

There are different templates for iPhoto books and they differ from version of iPhoto to iPhoto, so explore the other options.

Nokia X6 - Cannot see contact number in text messa...

Hi all,
When I am sending a text message, I cannot see the contact telephone number in the To: field. Is there a setting somewhere that I have missed ?
In my previous nokia phones, you can always see the contact name and the number you are using.
Thanks.

1 : Assume that you have entered the different nos. (mobile, Landline, etc)for ONE person under a single Phone book entry..
2 : If you have done the above you will get the pop-up box for selecting the phone no.
3 : When you select the no. from the list you know which one was selected (... and it is not a landline no..)
Then why do you need to see the no. in the 'To' field once again ?
And you can first write the Text message and then add receipients in the 'To' field...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

I cannot see my own sent texts

I cannot see my sent texts to other iphone users. This happens whether it is iMessage or SMS. It will show the sent message while it is sending and then the message will disappear. They will get it and respond to it but I cannot see it. Please help.

And what troubleshooting steps have you tried so far?
Relaunch the app?
Restart the device?
Reset the device?
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Cannot see/edit white text in editor mode

I am using contribute 3.11 and have run into a strange issue.
On a few of my webpages i noticed that when going into editor mode
contribute has a few of my page's text <li> highlighted in
white. (The highlights are only in editor mode and do not publish
as highlighted.) The problem is that my text is white and I cannot
see any of my text to edit unless i manually change the text color
to something dark and then change it back. I thought it might have
been the webpage or css but most of my pages have the same css and
they work fine in editor mode. Also, if i try to edit this in
dreamweaver it works fine so i know its not the page. Is there a
setting in contribute that im missing that highlights text for
editor mode. Any ideas???

Hi folks
Okay, here is a temporary workaround. I use this technique ALL THE TIME. Actually, just yesterday I used it repeatedly for about 5 hours for something I'm building in Captivate.
You will need to have more than just Captivate open. It doesn't really matter what, just that another application is open and maximized to fill the entire screen.
Scrub the playhead in Captivate until you get the image you want.
Without releasing the mouse, carefully press Alt+Tab to switch to the maximized application. Then release the mouse.
Upon returning to Captivate, you should see that the playhead is right where you left it. Somewhat in a state of suspended animation, As if you are still in the midst of scrubbing!
At this point you have some options. You may choose to click Insert and proceed to insert a Caption or a Highlight Box.
The edit area should remain put until you park the playhead.
I discovered this by accident one day and I really hope Adobe never "fixes" it as it's quite useful!
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

I cannot see added pictures by previewing from iPad

I can see pictures, audo files, and texts which I added to a template in ibooks author. However, when I clicked "preview" and send my work to iPad, I cannot see any added pirctures, texts, audio files. What is wrong? I appreciate any help and suggestions.

Hi Kalachan,
Check iOS/iBooks version and update to the latest one; Also can you confirm what all things you see in Ipad.

I switched from an iPhone to a Galaxy s4. Everything seems ok except text messaging with people who have an iPhone. I can send them a text, they can see it, but I cannot see what they text back. What can I do please?

I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging. I can text, they can see it, but I cannot see their response if they are using an iPhone. Can you help me with this? What do I do please?

Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC
Please keep us posted, and let us know if this resolves your issue!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Nokia 5800 - cannot see caller contact name (one m...

This is a repeat of the question asked and seemingly "solved" here:
I'm starting a new topic cause the label for the topic mentioned above says "solved" in nice big green letters so people might miss this issue being raised again.
I have a 5800 XM (RM-356, software V51.0.006) with 250+ contacts...
The problem appears as in the case above, happens daily: I get a call from a number which is definitely in my contacts (phone memory, not SIM) but I still just get the number displayed and not the name of the caller.
Furthermore, if I then take the callers number as reported by my phone (with the '+' for international and all), and update the contact, nothing improves, same thing.
It gets better : my wife has the same number for her cell phone and home phone, with a different area code (smart, eh?). There Nokia definitely confuses the two, only if I erase one of them then I get her name when she is calling, though the numbers are definitely different, e.g.:
+38111XXXXXXX and +38165XXXXXXX (in the example the +381 is Serbia, and 11 and 65 are two different area codes).
This issue is driving me nuts, and not because I can't recognize my wifes number , but because of the OTHER 250+ business contacts that I get calls from daily!
I have tried everything, including doing a "hard reset" of the whole phone... not to mention it took me hours to get everything else but the contact list back to previous settings....
What is wrong here?
There has also been this advice on the Nokia forum :
unfortunately, tried all of it, and nothing worked.
To further complicate the matter, this problem appears only for a fraction of the numbers in my contact lists = some contacts I see names just fine when they call, and some I cannot get to show up no matter what...
Many thanks for all your help!

It is simply multiple entries, as you have no doubt read about, for example if you entered all your wifes numbers just to your wifes name, but as individual details they would work. So say the contact is Wife, select option edit, add detail, then you can have Mobile , home and work numbers all attached to that one contact, and caller id will work, as long as you don't have several of her work colleagues as contacts with the same works number, the failure of caller id is always due to a conflict, as the phone can only identify the number (the incoming info) and if that is attached to more than one person it just gives out the number.
To resolve the problem you need to find and remove the conflicts !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Cannot see text in large PDF file

Hi all,
I've searched Google and these forums, but I have yet to find anything relating to my issue.
I'm trying to view a PDF file, but I cannot see any text in Adobe Reader.
I've viewed it w/ the FoxIt reader, and I can see all text there.
Any idea as to what the problem w/ Adobe reader is?
I have the most up-to-date version of the reader.
Thanks in advance.

Enable the entry 'Show large images' in the preferences of Adobe Reader.

It doesn't display the name of who sent the text m...

okay, so i have always had nokias, which have this feature.
i now have a nokia E63 - and when i first got the phone it showed the name of who's text i received before i opened it - so i know the phone has the feature.
however, its stopped doing it, i cant remember changing the settings - can anybody help and tell me how to get it back? thanks i would really appriciate it.

hi there...
try this path
menu->tools->modes->home screen applications->enabled applications->message notification (the second last one)
if the message notification is "ticked/checked" & you have home screen as "active" in place of "basic" [menu->tools->settings->general->personalisation->home screen->home screen] you'll be shown a message notification at the bottom of the screen & going to that notification will show your the name of the sender & the first few words of the message...
if the message notification is unchecked you would just receive "1 new message received. open?" & yes & no as the options over the selection buttons...
hope this helps...
regards,
anupam149
regards,
anupam149

I have Photoshop CS5. I cannot see what I typed in a text box, but the layer lable exactly what I had typed. Thanks!

I have Photoshop CS5. I cannot see what I typed in a text box, but the layer lable exactly what I had typed. Thanks!
Thanh

Thank Silkrooster for your prompt answer. I just figured out my trouble was caused by the font size was 12pt while the photo resolution was large 20M pixels. By changing the font size to 200 I was able to see all the text. Thanks again!
Thanh

Cannot see NAS on my local network by its name (Linksys EA4500)

Hello,
I have just bought a new EA4500 and set it up at home. Most things worked like a charm except one. I can no longer see my Synology NAS on my home network byt its name.
I have the router connected to internet (local ISP, PPPoE). I have the NAS connected by wire, two Windows 8 PCs connected wirelessly. There is also a TV (wired connection), a printer, some Windows Phones and Kindles. One of the PC cannot see the NAS (the other can). It can connect to it by its IP (in browser, by ping), it can see its media server (I can play music from the NAS in my Media Player), the TV sees the NAS as DLNA media server... But the PC cannot see the NAS by its name.
If I list connected devices on the router settings, I can see the NAS and its name. But the PC cannot. What is wrong?
Both PCs have file sharing turned on. I have even SSH'd to the NAS ind successfully pinged the PC by its name. For full disclosure, the PC has VMWare installed with Windows 7 virtual machine.
I made no settings to the router other than going through the Cisco Connect wizard and disabling guest wifi.
Thank you very much for any suggestions.
Solved!
Go to Solution.

Thank you. Restarting everything didn't help. It happed to be solved by itself later on. I was fiddling with wifi settings and set (and unset) FIPS. Then it worked. No idea if it was a coincidence.

Cannot see text selection on Mac

Hi,
I cannot see text selection on a paragraph when performed text select by holding 'Shift + Arrow' key or 'Command + A' with Type tool. Sometimes text selection doesn't work. This is happening with Adobe Illustrator CS6 on Mac (Maverick OS). Looks like a bug in Illustrator CS6. Need help in resolving it.
regards,
balachandra

Wow! Its working. Thanks

Cannot see name of who texting me

Similar Messages

Maybe you are looking for