Cannot see Networked computers and problems with WEP sign in

I recently installed a new HD (SAMSUNG HM500LI) into my 2.16GHz MacbookPro running 10.5.5 and transferred all my files using Apple's Migration Assistant.
Everything seems to have been working fine until I tried to log in to a friend's wireless network using a WEP password. OSX gives me the error message "Commection Timeout". I can however connect to other unsecured wireless networks on the list.
I have tried deleting the keychain access for the WEP network and reentering the correct password, but no success.
What I have also realised is that I cannot see other macs on my Network in finder any more.
Another point worth mentioning is that the Parallels NAT and Guest in Network preferences (for Parallels virtualisation software) have now automatically been renamed to Ethernet... (en2) and (en3).
I still have my original harddrive in an external casing and booted from that and everything worked perfectly - I can both log onto the WEP wireless internet and see other macs in my vicinity.
Can anyone help me here please? Are there maybe some settings that weren't migrated with the assistant? Could it be that my file sharing settings need altering? Did I maybe not format the new drive correctly (I just erased the new one and formatted it in Mac OS Extended (Journaled))? Has a recent Apple update maybe upset something, and if so, is there a way to uninstall it?
Thank you in advance.
Robert
Message was edited by: Robbie1702
Message was edited by: Robbie1702

Hi Robbie, and a warm welcome to the forums!
Have you done any Maintenance since installing?
If not, at start with this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
Then delete the orignals & reboot once more.
On the WEP PW, try putting a Dollar Sign in front of it, like...
$xxxxxxxxx
Also, is the WEP PW exactly 5 or 13 ASCII, or 10 or 26 HEX characters?

Similar Messages

Viewing HTML e-mail and problems with = (equal sign)

Good day,
I am having problems with apple mail rendinering html e-mail messages. There are extra = in the message body. The = appears to be line continuation character in the HTML. I have no problems viewing the message in Thunderbird or Entorage, but Mac Mail is a problem. The = appears to be displayed as a literal rather than part of the html reconstruction. Any thoughts as how to resolve this issue?
Here is the source of the message.
Received: from [67.17.248.27] by vms047.mailsrvcs.net
(Sun Java System Messaging Server 6.2-6.01 (built Apr 3 2006))
with ESMTP id <[email protected]> for
[email protected]; Thu, 18 Oct 2007 20:48:18 -0500 (CDT)
Received: from rhlxprd2.somecompany.com by [67.17.248.27] via smtpd
(for relay.someisp.net [206.46.232.11]) with ESMTP; Thu,
18 Oct 2007 21:48:17 -0400
Received: from rhlxprd2.somecompany.com (unknown [127.0.0.1])
by rhlxprd2.somecompany.com (Symantec Mail Security)
with ESMTP id 4EF591901B4; Thu, 18 Oct 2007 21:48:16 -0400 (EDT)
Received: from INEXCCL1.somecompany.com
(inexcbe2.somecompany.com [192.168.23.36]) by rhlxprd2.somecompany.com
(Symantec Mail Security) with ESMTP id 0B4D29C07B; Thu,
18 Oct 2007 21:36:03 -0400 (EDT)
Date: Thu, 18 Oct 2007 21:36:54 -0400
From: "Pfister, Scott" <[email protected]>
Subject: western-eroup-iso-html-nocr
X-Originating-IP: [67.17.248.27]
To: <[email protected]>, "Some Guy" <[email protected]>
Message-id: <[email protected]>
MIME-version: 1.0
X-MIMEOLE: Produced By Microsoft Exchange V6.5
Content-type: multipart/alternative;
boundary="----=_NextPart_00101C811F0.87CDD9C6"
Content-class: urn:content-classes:message
Importance: high
Priority: Urgent
X-Priority: 1
Thread-topic: western-eroup-iso-html-nocr
Thread-index: AcgR7b/obZRXrjryTPWlwmsfeV7IJw==
X-AuditID: c0a8195c-b0552bb000005d6c-ca-47180a036da8
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
X-Brightmail-Tracker: AAAAAA==
This is a multi-part message in MIME format.
------=_NextPart_00101C811F0.87CDD9C6
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
this is a test
;alskdjf;lkajdsf;lkjsaf
;alsjf;lsajf;lkdsaf
;lasjf;lakjfds;lksaf;lkasfdj;lkasd;lkfa;lkdsf
;lakjfds;lsajf;lksaf;lksasdfasdf;lkjafds
This email and any files transmitted with it are confidential and intended s=
olely for the use of the individual or entity to whom they are addressed. If=
you have received this email in error please notify the system manager. Ple=
ase note that any views or opinions presented in this email are solely those=
of the author and do not necessarily represent those of the company. Finall=
y, the recipient should check this email and any attachments for the presenc=
e of viruses. The company accepts no liability for any damage caused by any=
virus transmitted by this email.
------=_NextPart_00101C811F0.87CDD9C6
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859-1">
<meta name=3DGenerator content=3D"Microsoft Word 10 (filtered)">
<style>

</style>
</head>
<body lang=3DEN-US link=3Dblue vlink=3Dpurple>
this is a test
;alskdjf;lkajdsf;lkjsaf
;alsjf;lsajf;lkdsaf
<spa=
n
style=3D'font-size:24.0pt;font-family:Arial;color:red'>;lasjf;lakjfds;lksaf;=
lkasfdj;lkasd;lkfa;lkdsf
<spa=
n
style=3D'font-size:24.0pt;font-family:Arial;color:red'>;lakjfds;lsajf;lksaf;=
lksasdfasdf;lkjafds
This email and any files transmitted with it are confidential and intende=
d solely for the use of the individual or entity to whom they are addressed.=
If you have received this email in error please notify the system manager.=
Please note that any views or opinions presented in this email are solely t=
hose of the author and do not necessarily represent those of the company. Fi=
nally, the recipient should check this email and any attachments for the pre=
sence of viruses. The company accepts no liability for any damage caused by=
any virus transmitted by this email.</body>
</html>
------=_NextPart_00101C811F0.87CDD9C6--

rembsen wrote:
- Sender has got Outlook (at least 2003)
- Mail service is Exchange (at least 2003)
Looks like there is a common theme there. It is probably just that the original message has been corrupted somehow. Some mail clients try harder to understand corrupted data than others. I can't really tell from your original post. With mail messages, you really need to have the original data, not copied and pasted and not forwarded. If you have such a mail message, save it as raw source, put it into a zip file, and e-mail it to me. I can tell if it is an Apple Mail problem or a MS problem. If it is an Apple problem, I can file a detailed bug report on it. You can find an e-mail address for me by Googling my nickname.

WRT54GC cannot see network computers

Hi all,
I've been trying to setup my home network having one wired PC and another one wireless. After numerous attempts I haven't managed.
I use DHCP and both computers have valid access to internet, belong to the same workgroup - but don't see each other.
At first I thought there was an issue having one computer wired and another one wireless. So I gave up.
Tonight I connected the notebook using wire and on my surprise computers still couldn't have seen each other. All setting have been configured as the desktop machine used to be on the network and the notebook is daily used on other networks without problem.
Both machines have valid IPs assigned but cannot ping each other! They see the router properly but not each other.
Is there anything I have to go through in the router configuration? Please help.
Regards,
AM.

hi , there is nothing specific in the router that you can possibly change for this issue.....however try this for the wireless PC.....go to the wireless section , and then to advanced wireless settings and disable "AP isolation"...
also check if you have any firewalls enabled on your PC 's

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Cannot see network drives

I just installed a wireless-n router (WRT610N) and wireless Adapters (WMP600N). I can access the internet from all computers, but cannot see shared files or print from any computer. I've run the home network set up wizard and tried many things, but nothing works.
When I connected with Linksys online chat, I was told that I had to reformat all of my hard drives to fat32 (mine are all running NTFS). I can't believe this is true.
Is there any way I can see shared folders and drives with this hardware configuration? (without reformatting my drives)

Are you able to see the shared folder on the router ? If yes then, Once the set-up page appear, click Storage > Media Server and Enable the UPnP Media Server. Specify Folder to Scan button lets you select content to add to the database of the Router's Media Server. Once you click this button the Media Folder screen appears.Now Check the option Auto-scan click on Scan All and Click on Save Settings.
Now, On your computer go to My Network Places and you will able to see the shared files and folders.

CAnnot see the tree and how to sync users

Setting up a demo network.
1 Novell Netware SBS server
1 Linux SBS server
Installed eDirectory to the Linux box, imanager and everything works fine.
Netware - master replica
Linux - read/write
If the Netware server goes down, we cannot see the tree.
Tried with SLP and without.
creating users in iManager from either server IP works fine and shows up in
Console1
Is there a way that when we add a user to the NDS, that it will create a
user on the Linux server as well? I mean on the actual linux server, not
eDirectory?
I suppose similar to setting DirXML for Active Directory and NDS?

Hi, thanks for your e-mail, pretty much the same deal for me, except one of
my techs is a Red Hat guy, so we had some tech knowledge before testing
this.
Actually, we noted that through ldap, we can see the eDirectory users on the
Linux server under the users section, and we can add them to linux groups
and shares, which through the setup of Samba, can map drives to the linux
server.
you should check out the article I sent along earlier that explains how to
set that up. Very interesting.
>>> <stanch@**.co.uk> 3/4/2006 1:11:31 AM >>>
Hello Robert,
Just so you don't feel alone out there..
A little of my background. I am a Linux newbie, ex MCNE from NW4 days and
run and deploy NW65 im my job. I decided to learn Linux and as I don't use
it at work. I thought the only real way to get familiar with it was to run
it at home. I purchased NLSBS9 and have installed it as the home server
and it runs the households email and Internet access. My users have
resistance to Linux at the desktop so its XPpro for now.
My experiences with NLSBS9..(remember I am a Linux newbie, hopefully if I
tell you something that is incorrect someone will jump in and correct me.)
It appears that NLSBS9 with it's accompanying Novell Linux desktop
licences was conceived as a total package. Linux clients to Linux server.
Windows client support is not so well implemented. For Windows user file
and printer access you need to run and configure Samba. Samba requires
linux users to be created and these are stored in an Ldap directory.
eDirectory is present solely for GroupWise to run, it is not linked to the
LDAP directory. The two directories are not linked or synced in any way.
I thought NLSBS consisted of Suse Linux Open server plus Groupwise.
Apparently not, as Suse has a facilty called LUM (Linux user management)
which is a tool that you can manage users with and it is linked to
eDirectory.
A little birdie tells me an announcement about NLSBS9 and future
developments could be made during Brainshare....
There is a .PDF of nearly 8 mbs. that is a introductory course to
installing and configuring NLSBS9 you can get it by running this url :-
http://www.novell.com/partners/nlsbs...lsbs_final.pdf
NLSBS9, for me, has been rock solid and all issues with it have been
caused by my own inexperienced hands.....GroupWise has performed
faultlessly.
Hope this helps..
Rgds.
Stan Chelchowski

For all those with D-Link routers and problems with iTunes dropping AppleTV

My setup: Custom built WinXP PC with iTunes 7.6.2. Apple TV w/Take 2. D-link DI-624 wireless N router, wired to the PC, wireless to the aTV.
I have an intersting phenomenon occuring with my Apple TV. I can sync the aTV to my PC and it works fine, but the first time we receive a phone call on our VOIP phone, the router drops the ATV connection to the PC. aTV still has internet connectivity, but iTunes on the PC cannot see the aTV, and I cannot sync.
A search yielded gobs of folks with D-link routers and iTunes/AppleTV connection issues. I just won an Airport Extreme router off ebay...as soon as I have a chance to test it out I will post back in this thread as to the results.
I know folks don't like the solution to be "spend more money", but I think it would be worth it to a lot of people if they knew a different router would solve their issues (rather than continuing to guess or throw money at the problem randomly).

I have a WinXP PC and a Linksys G class router. I am on Comcast broadband cable. Both ATV and PC are on wireless link. And I have tried a borrowed Apple Airport router (G class). That didn't help resolve this problem so far. I don't think it is a router issue as you will see that many folks on this forum have the same problem with a wide mix of environments. Many of them are on pure Apple components and so one cannot blame Microsoft and non-Apple devices.
Having said this, I hope the new router resolves your issues. In my case, the only option left is to keep calling Apple Care.

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with a signed applet and a user machine.

Hello. I´m having some problems with a signed applet with some dependences.
In one particular computer the applet doesn´t load.
The java version installed in that computer is 1.6.0_25.
The invocation tag:
<applet name=applet id="applet" code=Applet/RequestApplet.class width=155 height=21 archive="RequestApplet.jar " MAYSCRIPT>
   <param id="parametro1" name="usuario" value="<Computed Value>">
</applet>The RequestApplet.jar and dependences:
   bcmail-jdk13-145.jar(signed by bouncy castle), jce-ext-jdk13-145.jar(signed by bouncy castle), AbsoluteLayout.jar, plugin.jar, RequestApplet.jar(signed by me)*this files are all in the same folder.
The requestApplet.jar manifest:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
X-COMMENT: Main-Class will be added automatically by build
Class-Path: bcmail-jdk13-145.jar jce-ext-jdk13-145.jar plugin.jar Abso
luteLayout.jar
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: Applet.RequestApplet
Name: Applet/ResponseApplet$1.class
SHA1-Digest: fO5IPiwEH3OhvlprhBecmMIAVJI=
Name: Applet/NewJApplet.class
SHA1-Digest: 6XSpm7lQEQRi39TegoUYv2aFJrk=
Name: Applet/ResponseApplet.class
SHA1-Digest: v1EbKUFB+QdvO05xx8UzAMNIyRs=
Name: Applet/ResponseApplet$4.class
SHA1-Digest: XH4I67psXZTelpz0AMAYc/Ej8QY=
Name: Applet/RequestApplet$1.class
SHA1-Digest: KAP5sAC4Thv/6GClkFAdGUVzgYA=
Name: Applet/ResponseApplet$5.class
SHA1-Digest: CVPnKrW2SgNEkRzYnVnQe3KGrIU=
Name: Applet/ResponseApplet$3.class
SHA1-Digest: SjfW1k1K7BA9m3AxmHi+jvRE+9o=
Name: Applet/ResponseApplet$2.class
SHA1-Digest: 3Pu18CZMLuEh7/n3y7XxFSkuNQY=
Name: Applet/RequestApplet.class
SHA1-Digest: Tky85es5+o371adetH9XVEI2Z+o=The error:
java.lang.RuntimeException: java.lang.NoClassDefFoundError: org/bouncycastle/jce/provider/BouncyCastleProvider
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NoClassDefFoundError: org/bouncycastle/jce/provider/BouncyCastleProvider
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
     at java.lang.Class.getConstructor0(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$12.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.bouncycastle.jce.provider.BouncyCastleProvider
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     ... 20 more

Thanks. I´ll try with your tips. But if i put all the dependences in archive I get this error.
The tag:
<applet name=applet id="applet" CODEBASE="." code="Applet/RequestApplet.class" width=155 height=21 archive="bcmail-jdk13-145.jar, jce-ext-jdk13-145.jar, AbsoluteLayout.jar, plugin.jar, RequestApplet.jar " MAYSCRIPT>
   <param id="parametro1" name="usuario" value="<Computed Value>">
</applet>The error:
Java Plug-in 1.6.0_25
Usar versión JRE 1.6.0_25-b06 Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrator
c:   borrar ventana de consola
f:   finalizar objetos en la cola de finalización
g:   liberación de recursos
h:   presentar este mensaje de ayuda
l:   volcar lista del cargador de clases
m:   imprimir sintaxis de memoria
o:   activar registro
q:   ocultar consola
r:   recargar configuración de norma
s:   volcar propiedades del sistema y de despliegue
t:   volcar lista de subprocesos
v:   volcar pila de subprocesos
x:   borrar antememoria del cargador de clases
0-5: establecer nivel de rastreo en <n>
basic: Receptor de progreso agregado: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@f39b3a
basic: Plugin2ClassLoader.addURL parent called for http://desarrollo.isaltda.com.uy/CertReq.nsf/bcmail-jdk13-145.jar
basic: Plugin2ClassLoader.addURL parent called for http://desarrollo.isaltda.com.uy/CertReq.nsf/jce-ext-jdk13-145.jar
basic: Plugin2ClassLoader.addURL parent called for http://desarrollo.isaltda.com.uy/CertReq.nsf/AbsoluteLayout.jar
basic: Plugin2ClassLoader.addURL parent called for http://desarrollo.isaltda.com.uy/CertReq.nsf/plugin.jar
basic: Plugin2ClassLoader.addURL parent called for http://desarrollo.isaltda.com.uy/CertReq.nsf/RequestApplet.jar

Cannot see networked PC's

I have an issue where 10.6 doesnt seem to perform automatic discovery of my pcs on my home network.
Whether this is a router issue or not, im not sure but the issue has happened twice and have since replaced my router for a different one and the issue is still the same.
The router im now using is a virgin Superhub - http://help.virginmedia.com/system/selfservice.controller?CONFIGURATION=1002&PAR TITION_ID=1&TIMEZONE_OFFSET=&USERTYPE=1&VM_CUSTOMER_TYPE=&CMD=VIEW_ARTICLE&ARTIC LE_ID=345044
which i beleive is a netgear powered router.
My Mac is :
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.5 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP41.00C1.B00
SMC Version (system):          1.27f3
Sudden Motion Sensor:
State:          Enabled
running 10.6.7

Hi Mark,
Please make sure the following services are enabled:
- TCP/IP NetBIOS Helper service
- DNS Client
- Function Discovery Resource Publication
- SSDP Discovery
- UPnP Device Host
For more detailed information, please see:
Network Discovery and File Sharing Won't Stay On
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-discovery-and-file-sharing-wont-stay-on/a12402a4-2826-4a0e-9b5b-45918ce33ef2
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Changing of the standard port 1521 and afterward problems with Single Sign

System / Host Environment
Operating System: HP-UX 11i, Existing Oracle RDBMS Vers. 9.2 x, Listener on standard port 1521
9iAS System Architecture: 9iAS Infrastructure and Middle tier (AS Instance) on the same machine
Problem Environment:
-Before and during the installation of 9iAS infrastructure the Listener of the existing Oracle RDBMS was stopped
-The installation of 9iAS Infrastructure (db: IASDB) Version 9.0.2.0 works well
-Afterwards the port 1521 of IASDB changed to 1525. For a detail description of IASB port changing please refer to Doc. ID: 211 929.1 AFTER CHANGE 'IASDB' LISTENER PORT
-The installation of Patch Set 2 (Common Patch 2703110) follows (9iAS is now up to Release 9.0.2.2).
-The Installation of 9iAS Middle tier (AS Instance) Version 9.0.3 follows
Problem description:
-During the installation of 9iAS Middle tier problems with Single Sign On occurs.
The reason of this problems seems a communication problem between the Single Sign On login sequence and the IASDB. After a reset of the port changing (back to the standard port 1521) the installation of 9iAS Middle tier works well.
Through this incorrect and problematic behaviour we have some notes and questions:
-Well at first the description of the port changing in Doc. ID: 211 929.1 seems us incomplete. Some configuration still carry on the standard port 1521 and not the knew value of the port 1525.
-So we want to know all configuration files and parts where we have to change the port value manually ?
-What will happened to the Single Sign On function with this manually port changing. Does Single Sign On works later on correct or have we to change much more ?

Currently, changing the listener port is not supported. It must stay on 1521. I believe this is to be fixed in a latter release (perhaps 9.0.4)

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Inability to See Network Computers with PPPoE

I am using a MacBook, connected to a Linksys WRT150N wireless router. I am also using PPPoE to connect to the internet; the PPPoE settings are in the router, not in the computer.
I would like to connect to computers in my LAN, but am not able to when PPPoE is turned on. (N.B. - I have this problem whether or not I connect to the network via the router or directly.) Turning PPPoE every time I want to connect to other computers in my network is obviously not an option. Are there any thoughts on my problem?
(It is also important to note that I had the same problem with my iBook, running Tiger.)

In both cases (cable directly attached or with a router), you have a firewall enabled between you and external network.
I'm pretty sure that you also have DHCP going because if you didn't, you would be getting an 'auto-ip' address (something starting with 169). I suspect you're currently getting something like 192.168.1.x? DHCP doesn't cross router boundaries (unless configured - and a personal router wouldn't be configured to do that).
If you want to make this work and keep your router in the mix, I suspect at the minimum you'll need to configure the router to consider your machine on the 'DMZ'. There should be a menu in there someplace that does this.
When you setup an internal host as 'DMZ' on these routers, you're basically just thrown out on the external side of the router. So be sure to protect your system with a local firewall.
As for when you're directly on the wire without the router, I'm not 100% certain how OS X handles its routing on PPPoE. Remember, with PPPoE, you're building a tunnel over a foreign network to a specific location, and then sending all traffic over the tunnel. The traffic wouldn't be able to break out of that tunnel to go to other network hosts by itself, so the OS would have to do what's called a 'split tunnel' and allow some traffic to stay out of the tunnel (the traffic that isn't working for you) while the rest travels in the tunnel (to the Internet).
Hopefully with this information, you can re-arrange/re-configure things to get you going. Just be aware of your host security in doing this.
Oh - and I'm heading out to work. Just a courtesy so you're not waiting for another reply this morning.
Message was edited by: mreckhof

Cannot see Networked computers and problems with WEP sign in

Similar Messages

Maybe you are looking for