Cannot see "New Entries" in transaction BD54

Hi all,
I am working on an IDOC to File scenario.I am doing the ALE settings. However when i try to create a Logical system using transaction BD54; it says " Display View 'logical Systems':Overview"
also i cannot see button for New Entries.
kindly suggest solution.
Neha

This may be problem with your roles and profiles given to your user.
You have only display authorization for this system, Contact to your basis team to give you the authorization for development / customization also.
Regards,
Sandeep Kaushik

Similar Messages

Extract process up & running but I cannot see new transactions in the trail

extract process up & running on source but I cannot see new transactions in the extract trail file and as result it is not replicated to target
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING E_ENVA 00:00:00 00:00:10
GGSCI (HOST) 186> send extract e_Enva status
Sending STATUS request to EXTRACT E_ENVA ...
EXTRACT E_ENVA (PID 11824)
Current status: In recovery[1]: At EOF
Current read position:
Sequence #: 33
RBA: 34904432
Timestamp: 2011-09-21 11:14:47.000000
Current write position:
Sequence #: 6
RBA: 1008
Timestamp: 2011-09-21 11:26:42.426000
Extract Trail: C:\GG\dirdat\enva\ce
GGSCI (ILW177711) 193> stats extract e_enva
Sending STATS request to EXTRACT E_ENVA ...
No active extraction maps.
Where to look next and what is the root cause for this,
thank you

all configurations was ok and working fine (meaning data was extracted on source and replayed on target) before extract/replicat processes restart
I did not touch any of the configuration files, after restart processes shows as up & running without any actual errors or rejects on the logs
please find extract configuration file:
EXTRACT e_enva
SETENV ( ORACLE_SID=orcl )
USERID USER_SCHEMA_A, PASSWORD AACAAAAAAAAAAAHAOFVCXAUANCVHIHCE, ENCRYPTKEY DEFAULT
DISCARDFILE C:\GG\dirrpt\e_enva.dsc, APPEND, MEGABYTES 10
REPORTCOUNT EVERY 10000 RECORDS, RATE
NOTRACETABLE
EXTTRAIL C:\GG\dirdat\enva\ce
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('START', null, 'ALL','e_enva')";
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('STOP', null, 'ALL','e_enva')" ONEXIT;
TABLE USER_SCHEMA_A.T_TABLE, KEYCOLS (ID_OBJECT);
TABLE USER_SCHEMA_A.T_TABLE_REF, KEYCOLS (ID_XREF, PKEY_SRC, SYSTEM, IND);
logging and supplemental logging enabled, commits performed and again nothing was changed in configuration except that processes was restarted
thank you

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

HT5361 suddenly I cannot see my gmail in my inbox on my macbook. I deleted the gmail account and added it back but I cannot see new gmail in my inbox. I can see sent gmail but not incoming gmail. The gmail is visible if I go to my google account on goo

Suddenly I cannot see my gmail in my inbox on my macbook. I tested it and I can see my gmail in google. I deleted my gmail account on my macbook mail and re-added it and still cannot see incoming gmail. I can see new icloud e-mail. I have both a gmail account and an icloud account. For my test e-mail in gmail, I can see sent gmail but not incoming gmail. How do I fix this?

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try re-indexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages

Cannot see new SMS in SMS and MMS inbox when SMS and Email Inboxes are separate

Blackberry 8310
I have this frustrating problem that i am not able to view any new SMS in SMS and MMS Inbox when i change SMS and Email Inboxes to be separate, each time i have to go to View Folder SMS Inbox to see new messages.
any help would be much appreciated

Hi,
I have the same issue, any solution available?
Thanks,
Steffen

ICal cannot save new entries in Leopard!! When showing Birthdays Calendar

It happens after upgrading to Mac OS X Leopard. I'll tried the same iCal and Address Book with a Mac OS X Tiger 10.4 and it works fine!
The problem:
- Occurred after upgrading to Leopard
- When turning on the "Show Birthdays Calendar" (in Preferences...)
- Changes in iCal, e.g. new entries, amending existing entries, deleting entries, etc., will NOT be saved!
- It works again if the "Show Birthday Calendar" is unchecked
- It also work with a "small" address book but not a BIG one -- My original one has over 2,500 contacts. If I replace it with a small one, these's no problem encountered.
Appreciate help!

Could it be that the setting Sync Services in Entourage doing the erasing entries?
I am having fits trying to stabilize calendars and sync. Entourage to iCal to .mac to Nokia E61i is an awful chore, often long hours not successful too.

After my upgrade to iOS6, my iPhone4 lost all entries in the Reading List and Bookmarks. I cannot add new entries. Any thoughts on how to fix this?

I'm not 100% positive that this is related to the iOS6 upgrade, but the timing is certainly suspicios. Previously, I had 7 entries in Safari's readling list and many entries in the Bookmarks. Now, I have nothing except the large pair of sunglasses and help text that tells me how to add a link to the reading list.
When I am looking at a webpage and click on the Forward button, I'm giving all sorts of choices now in full color... facebook... Message... Twitter... Mail... Add to homescreen. The following buttons are all grey: Print, Copy, Bookmark, and Add to Reading List.
I'm guessing that the icon color is a red herring. Print and Copy, despite being grey, appear to work fine. Bookmark and Add to Reading List have problems.
Adding to the Reading List makes the forwarding screen go away, as though the link was added. When I click on the Bookmark icon and look at my reading list, it remains empty, displaying the large sunglasses and help text, as though the list has never had an entry added to it.
Adding a Bookmark prompts me to enter the name and location. Interestingly, the list of locations is empty. I have a single folder with no name and a check mark next to it. I cannot do anything else (make a new folder, for example). Once added, when I click on the Bookmark icon to look at my bookmarks, that list remains empty of individual bookmarks. All I have are: Reading List (still empty), History (full of expected entries), Bing (which takesme to some Bing thing).
Any help in restoring my bookmarks and Reading List entries would be appreciated. Thanks!

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

Cannot see new hard drive in disk utility

Hi-
My original hard drive (less than a year old) when down hard. I bought a new Seagate 160GB SATA drive and I cannot install Tiger (or Panther for that matter) because I have no hard drive recognized in the drive utility. Curiously, I ran Apple basic HW test and mass storage checked out okay...the test just showed passed. Seagate offered no help - I can't see any info regarding jumpers or such... SATA shouldn't need it anyway. My system is completely deviod of 3rd party items - completely stock as shipped.
I then ran the extended hardware test and received error code 2GMC /2/15: built-in.
Sounds like I'm hosed. Whatever it is, it probably took out the original hard drive.

Yes, the same thing happened to me. No, solutions yet.
Were you using Software Update to upgrade?
I've tried most of the repair methods listed here and elsewhere. I think my external hard drive (external La Cie 200 gig) was damaged by the update process. As now it can't be read by my laptop either.
Very angry about this. but i'll turn that anger into another post. Good luck, let me know if you find a way to revive disks while i look for something more powerful than Disk Utility (it bails out of even the Verify Disk process).

Cannot see new Z datasource

Hi
I have created a new Z datasource in R/3, but am unable to see it in BW..
Here's what I've done:
R/3:
1. RSO2
2. Created Text datasource, based on Table
3. I can see it in RSA6. Also went to ROOSOURCE table and it is in A version
4. Ran Extractor checker (rsa3) and got the required data
BW:
1. I click on Source systems
2. Searched for the Z datasource to replicate, but couldn't find it.
3. Checked Source system connection and it is ok.
Is there anything else I need to do?
Thanks
Adi.

hi,
Hi, select the source system where you created the data source, and select the application component and replicate data source. if you dont find it just refresh the subtree. you need to activate the data source in BW Again.
regards
vadlamudi

Cannot see new Seagate 1TB Hard Drive on SBS 2008 R2 (Onboard RAID)

This is probably an easy setup, but I just want to make sure that I am doing this correctly and not mess up the current Raid Array.
This is on a Intel S5000VSA server motherboard. It has an Onboard 6 port RAID card. Currently there are three SATA HDDs connected to the right of the Onboard RAID (if you are looking at the Motherboard directly). There is another connection that
least to an external SATA port that is connected to the left of the Onboard RAID. My boss purchased a 1TB Seagate and want is connected onto the server as its own drive; not connected to the current RAID array 0.
I have installed the new 1TB Seagate to the next open port next to the eSATA connection. When I start up the server, during the boot up I see the 3 hard drives (the three original and the new 1TB). When the Windows SBS 2008 R2 finally boots up and I open
the Disk Management, I do not see the new Hard Drive that I installed; I only see the existing C: and external BackUp. I tried to rescan the drives but no go.
Do I need to set up a new Array for the new 1TB Drive?
Just to look, I did launch the RAID Bios and confirmed that the RAID does see the new Hard Drive and has a READY status. I know I do not want to do a New Configuration, because it will clear the current configuration. When I select the view/add configuration,
I can set the new Hard Drive status from READY to Onlin A01-00. When I save and exit, then look at the physical disk status again, it reads as ready.
I don't think I have to add the new Hard Drive as a new array, but I could be wrong. I wanted to get some input before I do anything else further.

After some looking around, I found a Document about the RAID Controller on the motherboard. Instead of adding the new Physical Drive as a Virtual Drive in the RAID Bios screen, I found that I was able to download an Intel Console version that was more user
friendly.
I did add the new physical drive as a new Array and once that was done I was finally able to see the new 1TB in Disk Manager.
Thanks for that Assistance Al.

Cannot see new RAM

I helped a friend with a 600 G4 to install a new stick of 512 RAM. She obtained it from a reliable supplier who said it was right SDRAM. WE started up and it did so with no warning beeps. But when we looked at About this Mac, it said that the slot was empty. The stick seated properly. The existing RAM was one 128 and one 512. Is there a limit on what the processor can address ? Any ideas ?

Hi-
The G4 Digital Audio supports up to 1.5gb of memory in three slots.
If you install a known good, reporting DIMM in the "empty" slot, does that DIMM show?
The most obvious probable cause is that the memory is of the wrong spec. I have tried PC DIMM's before, only to have the slot show as "empty". Common with high density, PC RAM....Mac's need low density.

Text entry on webpage sometimes blocked, cannot see key entry.

I am actually trying to make an existing ASP.Net webpage compliant to use on Firefox for Android.
I am finding that in a lot of cases, text fields will turn blue and the keyboard will show, but typed keys will not show in the text fields, until you click onto another tab of Firefox, then back again (some sort of repaint issue?)
On working webpages, the text fields turn blue then turn white again, with a visible text cursor, and typed characters will show immediately as you type.
It seems to have something to do with frames (both iframes and classic frames).
I've found that if I strip the webpage down to minimal fields and tables, I can restore the typeability, but at the expense of features I need, and which don't always fix the problem, eg
* the problem seems only to occur when the page is nested in a <frame> or <iframe> element (as source page).
* in one case I found it was a <td> element in the page *later" than the field at fault, which had a style="height:Npx" setting -- when the height was removed, the field worked.
* in another case, it was the existence of an <iframe> element that caused the problem, and whose removal fixed the problem.
In both these cases, removing these features doesn't of themselves fix the issue generically (only in the particular test page), and in any case are needed for other features of the webpages.
My questions are
a) does anyone else experience this, in which case I can put it down to an issue with Firefox for Android (current version)?
b) if yes to above, does anyone have a definite cause and fix for it?
c) is this an acknowledged problem by Firefox for Android, and is there a fix around the corner?
Cheers
p

Locking as a dupe of https://support.mozilla.org/en-US/questions/917521

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Cannot sync anymore new entries from my Calendar in Outlook03 to my IPhone.

I cannot sync new entries from my Calendar in Outlook 2003 to my Iphone3g. It syncs my calendar up to a certain date. All new entries since a week aren't sync. The bizarre thing all changes made to my contacts & notes do sync properly. I have reinstalled ITUNES, restored my computer to January 27, Restored my IPhoneG3. Checked and rechecked the info on ITUNE. Checked Outlook03, followed the steps Apple gives to sync.
Anyone got an idea?
Thanks Daniel

Switch iCloud on in Settings > iCloud > Calendar: ON

Cannot see "New Entries" in transaction BD54

Similar Messages

Maybe you are looking for