Cannot see Photoshop Services in Bridge

I do not see Photoshop Services item under my Bridge Tools menu. I am running Bridge / PS CS4. I did the recommended install and all startup scripts are enabled. I also do not see the Photoshop automate tasks like Contact sheet II that I used to have under CS3 (I have installed the extra plugins from the CS4 disk). I have a MacBook Pro and G4 MDD desktop and have the same problem on both.
What am I doing wrong? (I tried searching forums and support, and am sorry if I missed this).
Thanks!
Mike...

Can't tell you about Photoshop Services, don't know that but for the contact sheet they replaced it with the Adobe Output Module.
this one you can reach trough using the workspace Output in the presets under workspaces or using the icon of a sheet of paper with an arrow (this is the right icon in the row top left on the bridge window.
If you can't achieve what you want with the output module you can always look at the goodies CD from the original install package for CS4, inhere you will find the Contact sheet 2 scripts for both PS and Bridge and a manual for installation :-)

Similar Messages

Bridge Raw not working, cannot see Raw image in Bridge

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

My Photoshop and bridge is CS4, purchased in 2008, and the canon 5D Mark
11, purchased earlier. I have CR2. The camera and software worked
together fine for all those years.
Now, however, when I click Bridge to open a file containing several
images, I do not get thumbnail images, just a circle with CR 2 and the
file name, no image.
If I double click one of the circles, the image will open in camera Raw,
and I can edit, and open photoshop and edit again. If I then save a Jpeg
version, I will be able to open it and see the image in Bridge.
The problem is that now if I shoot 100 pictures, I can open Bridge but
there are no thumbnail images, only CR2 and file name.
I hope this can clarify the problem. Camera and software have not been
changed.
Thank you very much. Please help.

XI Post Installation: Cannot see Business Service Test

Hello Everybody,
I have installed XI.
At the stage, Checking the Installation Part 2:
I have to create a new Business Service: Test
Save the service and then Activate the Change List.
I did all of that, but when I enter transaction SXI_CACHE on the ABAP side and then double click SERVICES, I cannot see the Server: Test .
Does anyone know why this Test Business Service does not appear ?
Also, I have not yet installed the SLD, can I have an XI system without an SLD ? If I want to install the SLD, can I do this as a separate step from SAPINST or can it only be done as part of the XI installation ?
Thanks,
Petr.

Hello,
I have checked in the Change List TAB and it is empty, if I change the search to include closed then I can see my Business Service.
When I open SXI_CACHE on the ABAP side the Services are empty and if I try to clear the SXI_CACHE with F6 or Shift-F6 I get this error:
Unable to refresh cache contents
Error during last attempted cache refresh
Error ID Business System
LCR_GET_OWN_BUSINESS_SYSTEM_SLD_API_EXCEPTION
Could this be caused be me not yet installing the SLD, and as I don't yet have an SLD I didn't to the SLD related parts of the XI post installation tasks ?
Thanks,
Petr.

Shared services services cannot see in services

hi
i was tring to change the password for shared servies
and i was able to do it
then
i deplyoed it succesfully but then after i cant see the shared services in services console
strange thing is i can open in my local host but cant open in user machine ( the shared servives)
Can any 1 tell me how to bring back the shared services back in services console and even in user machine

Hi,
In AAS, under HBR node, right click Administration and refresh user list.
You could also try to refresh the security from shared services.
HTH
Seb

Cannot see BITS service in Windows server 2008 R2

Helo experts,
I'm trying to enable BITS service in Windows Srv 2008 R2, where my SCCM 2012 primary server installed.
But the BITS service is not appearing in IIS7.
Want to make sure the service is running before upgrading to sccm 2012 SP1
thanks in advance, if someone can show the way..
Reg,
Chandri

Have you added the BITS feature using Server Manager? You must have. It was a prerequisite for SCCM 2012 RTM.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Cannot see Canon 5d thumbnails / miniatures in Bridge CS5

I have Canon 5d mrk II, CS5 and Camera Raw 5.7
I can process photos in Photoshop CS5 by clicking in Bridge, but I cannot see thumbnails / miniatures in Bridge, only icons ...
I have emptied the cache and chosen reset all settings in Bridge.
I am lost ...

Hello
I tried Tools, cache, empty cache - failed.
I tried to download camera raw 6,2, install, couldn't install.
Then I tried Bridge, Help, update, and got the error message: Another instance of updater is running.
Hmm. searched the web, and found this:
http://kb2.adobe.com/cps/851/cpsid_85106.html
Finally I works!
Thank you!!

Help! can't see CR2 thumbnails In Bridge

what can I try?
I cannot see the thumbnails in Bridge but can go into CS4 and open them up no problem
I shoot Canon 5d Mark II
I downloaded Camera Raw 5.3
works fine for my regular 5D but no on the new Mark II
any suggestions?
thanks!

Hi - Joan's husband here (I built the computer hardware for her, but don't
really know Photoshop that well). I did a search for "camera raw" files and
found a second instance located in the adobe/common files folder (not in
program file subfolders as the proper plugin is located per instructions).
It was the 5.0 version, and I could not do anything with it, eg delete it as
it "was in use by a program", even though I had no prgrams open. I was able
to rename it to "old camera raw 5-0", and I copied the new camera raw 5.4
version into that folder. I rebooted and now had 3 camera raw plugins
appearing in CS4/hlep/about/plugins drop down list.
I then went back into the common file folder and was able to delete the old
camera raw file. I now have two camera raw files appearing in the
help/aboutplugins dropdwon, but they are both the same 5.4 version. Now I am
able to see a selection to generate a high quality thumbnail for the cs2
files in Bridge when I right-clicked on those, and this generated the
thumbnails for all of those file types. All is well now (I hope !!), thanks
for your input and advice.
I did purge the cache, but that didn't change anything as far as I could
tell. Also, the 5.4 update doesn't show the Canon 5D Mark II on the list of
updated cameras for this revision, so I don't think it is a necessary update
for this specific camera, but probably good to stay current.
If this was an "end-run" around a proper fix then I would like to know the
proper way to resolve this.
Best Regards,
Jeff Sutton
Joan Sutton Photography
6 Longmeadow Lane
Medway, MA 02053
508-533-1371
www.joansutton.com

Missing Photoshop services

What do I do if i'm missing the photoshop services under bridge? I really want to be able to batch process files through bridge and not through Photoshop solely.

I found a book in the bookstore Secrets of Adobe Bridge: Making the Most of Adobe Creative Suite 2 that said the problem is probably in Photoshop and not in Bridge. It said that these functions that we are missing are loaded when one installs Photoshop. That may be what we have to do is reload Photoshop from the original CD; I hope.

I have a Photoshop CC subscription but I cannot see it in "My products and services"

I have a Photoshop CC subscription but I cannot see it in "My products and services".
I tried to follow http://helpx.adobe.com/x-productkb/global/find-serial-number.html , but that DOES NOT HELP.
Thanks.

Hi ytwong,
I am Email ing you an link which you have already recieved in mail when your was placed & approved. By using that link you got in the mail or that I will Email you, you will be guided appropriately.
You have an active subscription.
Kind Regards,
Rajshree

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

Paste from Illustrator to Photoshop, I cannot see the pasted object

Sorry for this dumb question but I have tried everything I can think of before asking this question. I have a single grouped object in Illustrator and I select the object and "Copy". Then I open up a new photoshop project and choose "Paste". Then I get four questions:
Smart Object, Pixles, Path and Shape Layer to choose from. No matter which one I choose I get a large box with an X. I cannot see the object just the box that is x'd out. This must mean something but I cannot figure it out. When I place it dissapears.
Please what is the secret to pasting objects into Windows Photoshop CS4?
Thanks, Brent

Magically, pasting started working. Maybe, my computer was running out of memory or something.
Thanks for your helpful answer.
-Brent

When I try to open a .jpeg in Bridge CC2014, I get the error message cannot find Photoshop CS6.

I have associated my .jpegs with Photoshop CC2014. I had to do this manually. Now, every other program opens them in Photoshop, except Adobe Bridge CC 2014.
If I try to Open a .jpeg (or any other file associated with Photoshop) Photoshop from bridge, it says It cannot find the photoshop cs6.exe file. Of course not! I uninstalled it before I installed CC. Maybe two years ago. And now Bridge CC2014 goes looking for that as the CS6 default Photoshop.exe?

I finally got it to work by going into Bridge->Edit>Preferences>Default settings. After choosing a file that is supposed to open in Photoshop, I chose to change it and browsed to Program Files>Adobe>Adobe Photoshop CC2014 and manually linking each filetype to the photoshop.exe.
I have spent the better part of a week getting Adobe software to work again after the Adobe CC2014 install. I will never trust Adobe CC updates again. They failed to warn me that CC2014 installs as a completely different copy rather than an update of CC. As a result, I ended up uninstalling CC apps after installing 2014. A mess that has cost me more than *30 hours* of chasing around forums, manually re-associating files. Even a registry hack! Found by a user, not by adobe.
Ordinary users shouldn't have to do this sort of thing after a normal install from the Creative Cloud panel. The genius software engineers at Adobe are being totally undercut by the keystone cops in the cc updates and install department.

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

If you do not own a license for CS5 there is not much you can do to get it thru Adobe. They only sell current versions of their software (CS6 or Creative Cloud). You would need to find a third party vendor and take your chances with them.
If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

Cannot sign in to Elements 9 Get error message 400-photoshop services unavailable

Cannot sign into Elements 9. Get Error message 400-photoshop services unavailable

They're not available because photoshop.com is dead and gone, and any photos there are moved to revel, which you can't access through PSE versions prior to PSE 11. You should have received a bunch of emails about this back when it was happening.
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/

I cannot update Photoshop cc, Photoshop cc(2014), Bridge cc. (U43M1D204)

I cannot update Photoshop cc, Photoshop cc(2014), Bridge cc. (U43M1D204)
But I could do in Lightroom 5, Lightroom cc(2015).
I've tried many times it comes out the same.

Creative Cloud Connection update error - U43M1D204

Cannot see Photoshop Services in Bridge

Similar Messages

Maybe you are looking for