Cannot see some UAR configuration tasks

I am on GRC 5.3, SP9. I see some of the configuration tasks for UAR; however, I cannot see the "REJECTION REASON" screen or the "UAR LOAD DATA TASKS" screen that the configuration manual mentions. I have all of the AE role assigned to me. Could this still be a security issue or are these older screens from 5.2 that are no longer available in 5.3? If it is a security issue, does anyone know what security is missing? I thought AEADMIN had everything needed for configuration.
Thanks,
Peggy

Never mind.... AEADMIN was missing some authorizations for UAR configuration. Once I added them, I see the config.
ManageUARLoadDataTask, ViewManageRejectionReasons, and a few others were not there. I didn't update my roles when I went to SP9 so this is probably why I am missing some.
Thanks,
Peggy

Similar Messages

Since I loaded Firefox 4.0 I cannot see some of my content on My MSN and Wall Street Journal pages

Since I loaded Firefox 4.0 I cannot see some of my content on My MSN and Wall Street Journal.
It' blocking some of my content. Please help.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Takes too long buffering on you tube, cannot see some videos at all.

Takes too long buffering on Youtube, cannot see some videos at all. Have gone out of youtube and come back in again. have restarted the computer several times. Have come back later and tried again with the same results.

I don't have this problem - but a bunch of other people have youtube problems since upgrading to Yosemite.Yosemite 10.10.1 causing Safari not to play YouTube videos...

HT204266 I cannot see some app in AppStore

Example:
Search from Google - iphoto user guide for ipad
http://www.google.com.my/url?sa=t&rct=j&q=iphoto%20user%20guide%20for%20ipad&sou rce=web&cd=1&ved=0CA8QFjAA&url=http%3A%2F%2Fitunes.apple.com%2Fus%2Fbook%2Ftips- tricks-for-iphoto-how%2Fid433940679%3Fmt%3D11&ei=iDeeT6zGIc3wrQeqsc2BAQ&usg=AFQj CNF85xWt8qTOd_0qh5Y2bu9Xj6YibQ&sig2=jqhZMR3Qne3Tttn44qwwfg
I am from Malaysia, I have purchased iPhoto for my iPad, looking for its manual from google, found a link which point me to AppStore but in AppStore it cannot be open.
A message appear "your request could not be completed".
I am a legal user, I don't understand how I am restricted from viewing or purchasing some apps from AppStore.
I need to see this app and maybe will purchase it - please help.

There could be many reasons...
First thing I'd check is if you're logged in to your account. And if those apps are available in your country.
Could just be a minor glitch, and a soft reset could be all you need. Try holding the power and home button for 10-15 seconds until the screen goes black and the apple logo reappears (you won't lose any data). May just need to reset the connection with the apple servers.

Premiere pro cannot see some media files

I did a Time Machine restore to two weeks before. When I opened a project I was working on in PP, the media files were not recognized. My camera produced MTS files (Sony fs100). Till this point, after two years of using it, have had no issues. I uninstalled PP (CC) and reinstalled it. It can read my media files, but it still won't read some .mpeg or .avi files that it previously could. Is there something else that should have been installed? Is there codecs that might be missing? Thanks, in advanced, for your response.
Werner

What error message are you getting?
Rename the folder that contain the mpeg and avi.
See if that will help.

Cannot see some registry values in Windows Server 2008 R2

I have a couple of Windows 2008 Server R2 machines running a custom shell with AutoAdminLogon enabled. I'm trying to temporarily disable these settings to apply some patches but when I navigate to
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlongon I don't see any of the key values.
Not sure what's happening...any insight would help.

if you don't see any of the key values..
and you know exactly what you are doing..
you can create the registry keys and values.
But make sure you know exactly what you are doing; adding and changing registry keys, might end up with a corrupt operating system.
Please try the settings on a virtual environment, before applying to the production.
If anything mess up with changing the registry you got your back covered, but if you're brave enough do it on the production server without doing the test on a VM.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Cannot see some of my downloaded and installed pro...

Hello!
I don't understand this - when I look in my Ovi Store and search my "Own Files", then I can find e.g. the Youtube app. I installed it today via Ovi Store.
When I look in my main menu under Programs, I cannot find it.
Also, if I search my memory card with the file manager.
I have the same behaviour with "Townsmen 6" - I downloaded and installed it long ago, and then my phone became a deep reset and software update at the Nokia Care Point - but the software was installed on the memory card, which of course was removed before deep reset.
I can find all this programs in the Program Manager, but not in the menu under Programs or any other folder and also not in the File Manager.
What's up with this phone? I didn't hack around with my phone - every app until now was installed via Ovi Store and removed via onboard tools from the phone.
Best wishes,
Schlaumy
"Two beer or not two beer?"

I can tell you another funny story:
I deinstalled all applications, which could be seen in the program manager, but not in the menu - this was Townsmen 6 and the Youtube app.
I reinstalled the Youtube app with Ovi Store - still it cannot be seen in the menu, and also not in the file manager.
BUT IT CAN BE STARTED IN THE OVI STORE! And it works completely!
What's this? A total inconsistency! I will try to search the phone, when connected to the PC.
What else can I do??
Best regards,
Schlaumy
"Two beer or not two beer?"

Cannot see some of shared music

Hi,
I am using home sharing for a while but just recently noticed that not all of the music in teh shared library can be seen form my iOS devices. The shared library that is on my Mac contains c.a. 200 CDs either copied form original CDs or purchsed from iTunes. Only some of them (48) show up on the list on my iPhone and iPad.
I am running latest iOS 6.1.3 on both iPhone 4S and iPad2 and lates iTunes (11.0.2 64 bit) on my Mac.
I have an iPhone/iPad dock from of the HiFi vendors connected to HiFi system and accessing my shared library is the only easy way to have access to all digitial musi on my Mac (would not fit into iPhone or iPad) therefore it is important to understand whether there is any limitation for home sharing in terms of the number of shared objects?
Artur

Log off of Home sharing on your IOS device then log back in. That should resolve it. You might have to do this every time you shut down iTunes on your main computer - i do, maybe you'll be luckier.

I cannot see some apps in app store

Dear users ,
I have problems in my app store, when i click on a link to download a game in my iPad , app store opens but then i got an error message which says : Your request couldn't be complete . And as an example , this happens when trying to install Angry birds HD , and angry birds also doesn't appear as application for iphone !
Could you plz help?
Regards

There could be many reasons...
First thing I'd check is if you're logged in to your account. And if those apps are available in your country.
Could just be a minor glitch, and a soft reset could be all you need. Try holding the power and home button for 10-15 seconds until the screen goes black and the apple logo reappears (you won't lose any data). May just need to reset the connection with the apple servers.

Entourage cannot see tasks in public folders in exchange 2003

Hi,
I have a bunch of users using entourage on their macs and they cannot see a public folder task list from an exchange 2003 server. They can see their mail, contacts, calendar, etc...
Has anyone ever seen this?? The rights on the public folder have them as owners of the folder so they should be able to see it. When the users click on the folder it says it is empty... but is isn't. Any help would be appreciated

Hi,
Please refer to the following article:
http://support.microsoft.com/kb/2249852/en-us
The issue occurs when the Internet Information Services (IIS) website that hosts the Exchange Web Services (EWS) virtual directory contains a site binding that binds to an IPv6 address.
Note It is a known issue that this configuration may cause an exception .
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Cannot see thumbnails in KM!!

Hi, I'm using EP 7 SP11
In some KM folders, after I've enabled the folder's thumbnail presentation, I can see some thumbnails and I cannot see some others (in this case, instead seeing the thumbnail, I only see the pic with the red cross, you know, that pic when a file is missing).
I checked the KM configuration about the Thumbnail repository, and the plugin, and they seem to be correct to me (The picture's formats are corrects too: jpg and gif).
Beside that, I've uploaded new jpg and gif pictures, but I see the same red cross... Is there any task scheduler to update the thumbnails every time I change one of them??
Could anybody please help me??
Thanks in advance!!
Greetings!
Marcelo

Hi Praveen, and thanks for your quick answer!
well, Maximum file size to generate thumbnail is setted (by default) at 8000 kByte, so I think that is not the problem.
I am doing tests with the thumbnail environment, so I am who is uploading and (hopefully) seeing the thumbnails on the folder. I have super admin role, and the test folder is setted with Everyone group and myself user as Full Control. So I suspect that is not the problem either.
I've explored the thumbnail repository using webfolders looking for the thumbnails, but there are neither images nor files inside it, only some empty subfolders.
Do you have another idea........?
Because I am running out of them!!
Thanks in advance!!
Marcelo.
ps: is there any task scheduler or something like that? I mean, a kind of bot or crawler checks for new or modified images??

Cannot see photos after upgrading to iPhoto 9.1.3

I upgraded my iPhoto to 9.1.3 and now I cannot see some of my photos. iPhoto indicates the photos are there, but all I see is blank dotted frames where thumbnails should be. When I click on one of the photos I get a gray out frame with an exclamation in the middle. I tried rebuilding the library/thumbnails, extracting using iPhoto LIbrary Manager, checking disk permissions/repairing in Utilties, etc. I tried every suggestions and recommendations I found on the net, but I still cannot see those files. I regret deleting them off my camera disc. These are the only masters I have. So I can't copy them back into the library. If anyone know how I can retrieve these files, please let me know. I also went back in my Time Machine and the same files are all empty gray frames. All I know is that the files were "visible" before the upgrade and now I can't see them after the upgrade. Any suggestions?

Hi - yes I did that last night and unlike rebuilding via control option route, IPLM did not rebuild those files. It stated they do not exist. I double checked by "Show Package Contents" and the master of those files is no longer there. My next move is to go into Time Machine and see if I can restore the library from when the files were still in there (though unseen by iPhoto) and hope the master are still recoverable. If that doesn't work, then I'm at the point of accepting that perhaps I may have lost 51 photos (1 event) during this upgrade. I'm still open to suggestions though.

Please help: User cannot see webi report data

Hi,
I've got a wired problem here in my webi report. Basically I am located in Singapore and produced a webi report for our user in UK. The report looks totally fine with all the data shown correctly. But when our report user logged into the dashboard from UK, she could only see partial data and some of the information are missing(blank cells in the report).
To verify the cause I've done the following test:
1. I remote control her computer and log into dashboard using my account, the result is I get same problem and I cannot see some of the data.
2. I let her remote control my pc and log into dashboard using her account, she no longer has this problem and can see complete data.
We use same version of IE, same JAVA version. And the report data is not time sensitive, so different time zone might not the possible cause.
This problem is killing me. Can anyone please help and let me know any possible solution? Thanks so much.
Edited by: Sinsin Tan on Jul 14, 2010 5:59 AM

Hi Sinsin, what version of BusinessObjects are you using? Is it XI 3.1?
I don't know if it is the same problem or not, but I have seen that before when a user cannot view the data, change the font and/or background color and the data becomes visible. Reinstalling the client fixed that problem. If you couldn't figure out the root cause, you might want to consider this option.
If you are using the BusinessObjects tool, you should join [ASUG|www.asug.com]

I cannot see my template and sent folders anymore... please instruct

hi
for the last couple of days I cannot see some folders (i.e. Templates, Drafts, Sent)
Sometimes the system suddenly begins showing them and they disappear...
any ideas?
thanks
Gabriel

''scan3d [[#question-1048067|said]]''
<blockquote>
hi
for the last couple of days I cannot see some folders (i.e. Templates, Drafts, Sent)
Sometimes the system suddenly begins showing them and they disappear...
any ideas?
thanks
Gabriel
</blockquote>
''finitarry [[#answer-693649|said]]''
<blockquote>
Try viewing All folders. Maybe the view setting got changed.
</blockquote>
thanks but... not there...
it seems to me that got something to do with the connection to the server... in some cases when I saved a new template suddenly all the folder reapeared

CANNOT SEE IMAGES INCERTAIN WEBSITES

Hi,
I cannot see some of the images in this website. Please help.
thanks

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Cannot see some UAR configuration tasks

Similar Messages

Maybe you are looking for