Cannot see STROKE commands...

I used to enter the stroke thickness on my side panel, along with perimeter position, etc.
Now, when I click it open (or hit F10) . . . it opens fully empty of options; it's all diappeared.
Is there any way I can bring it all back (I've tried resetting the worlplace), aside from reinstalling?
Also, the panels used to close when I'd click on the open file page; not they stay open...
I'm using ID CS3; any assistance would be appreciated.
Best,
NYJack

Trash the prefs. See Replace Your Preferences

Similar Messages

PSE 6 - Cannot See Command Bar at Top in Editor

I am using Elements 6 Editor and I hit some button and the editing screen "enlarged" so that I can't see the commands along the top (file, edit, image, etc...) - it stays this way when I re-open it. I've tried every scroll bar and nothing works. My DPI is still set at 96, so that's not the issue. Help!
Thanks!
RogerB

Thanks Barbara - that worked. Out of curiosity, I entered PSE and I clicked the "maximize" button in the upper right corner - it goes to the unusable missing command bar layout. I ran the ctrl+alt+shift again and now I will manually enlarge the window. Wierd.
Thanks again - you rock!
RogerB

I can't see anything! The websites are either all black, or all white. The farthest I have gotten to seeing anything was the Google page, and that went black immediately. I cannot even see the commands at the top of the page!

I just downloaded the most Recent version of Firefox and I cannot see anything. Everything just goes blank, and I can't even see the toolbar up to try and get into the settings!

Did you check the default text and background colors?
*Tools > Options > Content : Fonts & Colors > Colors :
Also check [X] "Allow pages to choose their own colors, instead of my selections above"

After upgrading to Yosemite I cannot see my other iMac at home (note I am at work) in the Finder window shared devices. Note my iMac at home is connected to an airport extreme (as is my work iMac) and I can see both airport extreme.

Aftger I upgraded to Yosemite I cannot see my iMac at home from my work (i.e in Finder window under shared devices). Note both my work and home iMac are connected to time capsules and I can see both of those time capsules but I cannot see either iMac from the other location. My guess is that the time capsule is blocking the connection to the iMac. One last comment occasionally (5% of the time) my iMac does magically appear in the shared Finder window but this is extremely rare. Any help????

Just discovered this one myself. OK, this may sound silly but place your cursor next to the word "Shared" on the finder sidebar. The "hidden" command "Show" will magically appear. Clicking that will display your other network attached devices.
This appears to be a new "feature" that some freaking genius thought was some how "Cool". My only assumption is that Apple programers expect users to randomly move their cursor around the screen in hopes of finding some critical function like looking for an easter egg in their favorite game.

Cannot see items in my trash bin sice upgrading to mountain lion

cannot see deleted items in my trash bin,since upgrading to mountain lion,it seems to delete items straight away.

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

I never had this problem before but all of a sudden when I go to "edit" a photo the photo turns black. All the editing functions appear but I cannot see any picture. When I hit "done" the photo reappears. Why can I no longer see my photo for editing pu

For years I have had no problems editing photos. However, for some reason when I go to "edit" my photo the photo turns BLACK/BLANK. The editing functions appear but I cannot see the photo. When I select "done" the photo reappears. Why is the photo disappearing for editing? Have I hit a command accidentally that is causing this? Really appreciate someone's assistance.

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions, followed by Option #4, Rebuild Database, if needed.
OT

Mac OS 10.6/Time Machine cannot 'see' HD to re-install or restore

Upgraded my Mac Mini to Snow Leopard a couple weeks ago and had no problems. Then yesterday the computer froze up (the mouse still moved and icons in the dock expanded with the mouse but NOTHING was acknowledged when clicking to tabbing to any commands; could not even click from screen to screen for various functions that were currently open ... yet the mouse moved fine). Tried to restart computer and all I get now is a gray screen with a flashing file folder with a question mark in it.
Have tried all attempts listed here and in Support to (1) re-install Mac OS X 10.6 from the original disk, and (2) restore my computer from my Time Machine. Have tried many, many times now for both options and in ALL cases the computer cannot see or find my computer. The only disks it can find to re-install or re-store to are the 2 external hard drives I have. If I disconnect these, the computer can find NO disks to re-store to. (I've now let my system search for disks for over 3 hours this time around, and it still cannot find any disks to install to.)
So what's happened to my Mac Mini and "where" has this disk gone to? Why can't my Time Machine or Mac OS X installation disk find (or see) my Mac Mini?
(Really do need a new computer and was seriously thinking about just buying the new iMac this week, so maybe this is the sign. But would still like to get the last few files off my Mac Mini that I was working on when it crashed -- don't think Time Machine actually had time to back these up ...)
Cheers, and thanks for any suggestions and help!

Karl
It sounds like you are having trouble with your internal Hard Drive.
Whilst this is quite serious, sometimes you can fully recover from the situation, depending on what happened.
One of the most useful and reliable rescue utilities is DiskWarrior:
http://www.macupdate.com/info.php/id/11707/diskwarrior
If you are lucky it may be something as simple as a damaged HFS+ wrapper, which can be repaired and have you back up on your feet again in relatively short order.
It pays to periodically check the *S.M.A.R.T. Status* of your drive, at the bottom of *Disk Utility.*
This is a self diagnosis function that may indicate impending problems. However if the disk has sustained physical damage, such as caused by a hard knock, nothing will redeem it.
Peter

Folio is uploaded in the server but I cannot see it in my Adobe Viewer

My folio is uploaded in the server but I cannot see it in my Adobe Viewer in my iPad, any idea guys how to be able to see it in my Viewer?
Thanks.

There are some bugs that can cause this issue. If you are adding long, smooth scrolling pages (ie 1024x3000) and performing a "New" to add the page from the Folio Builder Panel versus using the "Import" command, this issue can be caused.
As the previous posted said, you need to either have all horizontal, all vertical, or all horizontal and all vertical pages. You cannot have a mix of both. If there is a fundamental error with your folio, it iwll not be available in the viewer.

I imported photos from an old iPhoto (2001) to photo library and can now see them as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

I imported photos from an old iPhoto (2001) to photo library and can now see them only as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

Did you import the old iPhoto library into the new one? That's not what you want to do because you will import all of the original, modified and thumbnail files as if they were original files. Lots of duplicates and useless small photos.
Do you have a backup copy of the library that you imported into to? If you do then bring it in and then use iPhoto Library Manager to merge the two libraries into a new, 3rd library.
If you don't then you'll have to try to fix the current one and then cull out the duplicates and small useless photos as follows: make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If this doesn't fix the problem you'll have to start over from scratch and create a new library from the files inside the Originals folder of your current library. But first you should cull out the small photos that would be the thumbnails from the 2001 library.
Move the Originals folder to the Desktop, open and do a search for Kind=photo, File size is less than 10 KB. That should find all of the thumbnail files which you can then drag to the Trash. You might have to make that less than 50 KB. Then Import the remaining photos into a new iPhoto library.
OT

SQL Developer - Cannot see list of tables in my connection

Hi - when I downloaded and started to use the SQL developer tool, once I connected, I could see all of the tables/columns in my connection on the left side of the tool, and I had my query panel, results panel, and SQL history stacked on the right. Suddenly something has changed, and I cannot see the list of tables, etc. in my connection anymore, so I have to rely on memory and SQL history to remember the table and column names. It has to be "hidden" somehow, but view-connections does not help, and trying to click and drag windows doesn't uncover it either.
Any suggestions?
Thanks!

Probably better to ask in the SQL Developer forum here: SQL Developer
I've been trying the version 2 beta though and it has quite a few bugs in. Table browsing is working fine for me, but all my functions and procedures have disappeared from the tree view. It does odd things with code formatting too.
I don't think it will be supplanting trusty old command line SQL Plus for me yet any time soon...

Cannot see users on other nodes

Calendar users cannot see the users on other nodes.What should I do?

You may not have configured your node-to-node connections. Use
Connect Nodes or uninode -edit. Your fully qualified domain name for
your network exceeds 16 characters. Shorten your domain name or setup
a shorter alias.

Follow these instructions after you have shortened the domain name or
created a shorter alias. These instructions are also available in the
Release Notes. If the fully qualified domain name for your network
exceeds 16 characters, it will be necessary to shorten the host name
of all the servers in the Calendar Server.network . These instructions
must be carefully followed to avoid causing problems with the network.
Ensure that the procedure is applied to ALL nodes in the Calendar
network.
1) The following procedure should be carried out on each server in
the Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server.
The file is located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node
(in N2), the files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers,
proceed as follows:
a) Compare the remotenode.ini files and verify that the
 entries are the same. In each file, you will note that
 an entry for the local node is not included.
b) Edit one of the files (on any of the servers). This file
 will be referred to as the master file. Add the appropriate
 entries for the local node (copy the section from one of
 the other files). Modify the RN_HOSTNAME in each of
 the sections of the master file to shorten the name.
c) Copy the master file in the perm directories of each node
 on all the servers.
3) Once the master file is in the perm directory of all the nodes,
proceed as follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the
 same changes to the host names. You do not need to apply
 the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini
 file and change the host name.
d) Start up the services.
% unistart

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check the permissions for all sites on the about:permissions page, via the location bar
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.

Lion-Windows users cannot see attachments

I just upgraded to Lion, and now some Windows users cannot see/find attachments. I did all that was advised (clicking on the "Windows user friendly" list), but to no avail. I sent to several Windows users and no one can see attachments with the new Mail program. Also, one of the most important icons in the Mail toolbar ("Add Attachment") seems to be missing. This sometimes helped in previous Mail versions when sending to PCs, but I cannot locate it in Lion. Looks like I will have to use Microsoft Office Outlook for email. This is too bad, as I like the other features the new Apple Mail program has, but must use a trustworhty email program.

Scott,
The issue is one I am chasing, and is due to Lion's change to not send Plain Text (apparently). Although changed in the Compose window, when reviewed, it will have been sent with HTML, anyway.
While the actual problem is with MS and Outlook or Outlook Express, the work around once was to use the command to Make Plain Text before sending.
Ernie

Cannot see photos

I have a bit of a problem with my aperture library, probably something silly I did, but would appreciate some advice.
Here is the situation, something happened, I clicked restore masters (or something like that), and then aperture spend the night playing around with my 30k pics. In the morning I looked and they were all there, comments, stars etc, all there, phew. But, whereas before, all of the folders and such were inside the single aperture file thingee (the one you need to click specially to open), now they are individual folders in my pictures folder, while the aperture file is now much smaller. It looks as if aperture, for reasons it is not divulging, moved the folders out into the os ?
I don't mind this as such, but I would prefer it all back where it was.
My second question, again probably something silly I did. I can see my pics in their projects, in the albums, in the os folders, but I cannot see the photos when I click the photos option, the one under the library list at the top of the left hand menu. I really would like to see these photos.
Can anyone help me with either of these things? Much appreciated.

1.
You probably clicked "Relocate Masters". This has moved the Masters of all of your images to a location outside your Library. To return these Masters to inside your Library, in Aperture select all images and click "File→Consolidate Master ... ". Full instructions are in the User Manual. When asked, specify that you want to move the files, not copy them.
2.
This is a known bug, but an easy fix was found by super-helpful forum regular Frank Caggiano.
As a general note: Aperture is very powerful, and puts that power within easy reach. It is not a program in which you want to execute commands without knowing exactly what they do. A great way to learn how to use it, though, is to set up a practice Library containing copies of a few hundred images.
Message was edited by: Kirby Krieger

The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" ...

Suddenly getting this goofball message in DW5.5 on Win7:
"The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" is applied to your page. Please select Edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable."
Crazy thing is, it only happens on my workstation.
DW5.5 on my laptop opens the same .asp pages without this crazy message popping up.
Anybody know what the issue is?

I'd suggest that no answer means no answer yet. The person who can help may not have been on the forum the day the post was made.
That said, I'm starting to suspect that the cause must be an extension. Both boxes have the same version of DW and the same OS but both don't have the exact same extensions installed. Will play around and see what happens.

Hi, i've just bought my first macbook pro, i just installed office mac and when i open the page i cannot see the minimise maximise and close buttons as it's hidden behind the apple menu bar, also when it's at full screen, those buttons do not appear

hi, i've just bought my first macbook pro, i just installed office mac and when i open the page i cannot see the minimise maximise and close buttons as it's hidden behind the apple menu bar, also when it's at full screen, those buttons do not appear

Try to edit the size of the page using the sides of the page, or if you are desperate, force quit using command-Q. In full screen put your cursor on the top of the page, and the menu bar will appear. If it doesn't keep "pushing" it up until it does. Hope this helps!

Cannot see STROKE commands...

Similar Messages

Maybe you are looking for