Cannot see sync messages in backend SXI_MONITOR

Hi
We have a problem with some sync message ScenarioX -> PI -> Backend sometimes taking 2-3 minutes executing. I have cheked performance of PI pipeline steps, and it is the CALL_ADAPTER which is timeconsuming. I have run and debugged the proxy code in backend system and that is performing well.
Question now is how the backend performs.
I have added LOGGING_SYNC to the IE ocnfig, but the messages are not showing in SXI_MONITOR on the backend system.
Any good ideas to what is the problem/solution?
Thanks
regards Ole

HI Ole,
explain you scenario, as you mentioned it is CALLADAPTER which time-consuming , so likewise explain which adapter you are using on receiver and sender side and what is the scenario .. is it synchronous or Asynchronous or Async to Sync Bridge and all information it will help to give you better solution for performance.. as many things depends on adapter you are using on Sender and receiver side as well as data size which is flowing thru interface..
Thanks,
Bhupesh

Similar Messages

  • Does Mac Messenger work with iPhone 4   system 5.01...? (I am receiving a notification of receipt but cannot see the messages sent.)

    To those who might know
    I have an iPhone 4, with OS 5.1
    I am receiving notifications of messages sent by various other users but cannot see the messages.
    Question: does Mac Messenger only work with 4S models..?
    Thanks.

    a successful automount of the other mini cd gives me
    $dmesg | tail
    [ 5667.156904] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 5667.157448] ISOFS: changing to secondary root
    and
    $mount
    /dev/sr0 on /media/110103_1110 type iso9660 (ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks)
    and there is a /dev/sg1 under /dev (instead of only sr0 before~~)
    (nothing changed in lshw (well, except the mount point is added~~~))

  • Iphone cannot be synced message

    I finally broke down and synced my iphone to get 3.1.3 but when I did it synced the new firmware but then at the end it gave me this message, "The Iphone cannot be synced. The required file cannot be found". I reset it using a backup but still the same message so then I did a complete reset without a backup and still got the message. What is going on? Anyone else had this problem and if so, what can I do to fix it?
    Any help would be great.
    Thanks

    I was having this same problem, and the suggestion of clearing the iPhoto ipod cache (see http://support.apple.com/kb/TS1314 ) didn't work for me.
    I successfully sync'd on my laptop (intel macbook pro), but not on my 27" iMac...
    I finally swapped my Belkin USB-iPhone cable (black) for the white one that came with my iPhone and the sync just started working in the iMac. Same port, same iPhone, other cable worked elsewhere ... Go figure...
    -John

  • Cannot see received messages in Mail

    I have a strange problem with Mail that arose after I deleted some messages.
    The mailboxes toolbar (the one down the side) clearly indicates that unread messages are in my In Box. However, they do not appear when I try and open the In Box. I have tried sending test messages to myself and Mail indicates they have arrived, but I cannot see them in the main menu.
    Any suggestions out there before I delete the account and recreate?
    Thank you.
    Andy

    Thank you for the suggestion.
    I actually went to the Mail folder in Library and found the account had an Inbox folder unlike my other accounts. I deleted this folder, quit Mail and reopened Mail - problem solved.
    I am not sure what happened, but as this account was receiving more than 25% spam I am now prompted to deleted and create a new account.
    Thank you very much for all your help.
    Andy

  • Cannot see email messages in one of my accounts

    I can see other messages from other accounts in my email on my imac except for one account. It shows that I have messages but I cannot view them. I went into preferences and shows that they are alos on server. What's happening that i can't see the message?

    You, sir, are a GOD!!!
    Thank you SO much!
    That article described exactly what I'd encountered, and the stupid, little 92 KB script fixed it instantly!
    (You wouldn't believe what I would've gladly payed, to retrieve that data! I cannot thank you enough!)
    Maybe I lack basic common sense, but I believe my Mail app should've displayed an alert message to the effect of +"Warning! Your storage in this mailbox is approaching 1 GB, and will therefore soon take an unexpected dump!"+
    I'm SOOOOO glad to regain access to all of that data. Every bit of correspondence between myself, the site's owner, our host, the sponsors, and our visitors...for the past TEN YEARS!
    I may even be able to sleep again, tonight.
    MUCH appreciation, my friend!

  • When I try to use my phone, it does not light and I cannot see the messages or who is calling

    When my phone rings or I get a message, the phone does not light up, therefore I cannot see anything on my phone

    My phone does not light up at all, when I turn it on or anytime.

  • Can GET email but cannot SEE individual messages!

    When I check my Verizon business email I see them in the inbox but when I click the messages I cannot READ any of them!

    HenryTew2 wrote:
    When I check my Verizon business email I see them in the inbox but when I click the messages I cannot READ any of them!
       What kind of device, computer, operating system?

  • Cannot see synced home movies on iPhone 4(iOS 6) and iTunes11

    My 2 year old plays with our old iphone, but always wants to watch the videos my wife and I took with our newer iphones.  So I used pulled the videos from our iPhone 4S/5 using iPhoto, used HandBrake to convert to a iPhone 4 compatible format, and loaded to iTunes.  At this point, everything works fine.  Video plays fine and all.
    When I drag and drop the movies from iTunes to the iPhone 4, they show as transferring, and appear in the "On This Phone" tab.  But in the "Videos" app on the iPhone, the only thing that is there are music videos from our iCloud.
    If I go back to the "On This Phone" tab, and check the "Get Info" of each file individually, it says they are Movies, but if you highlight all and select "Get Info" it shows that they are all Music.
    If I drag and drop the same movies to my iPhone 5, they do appear properly in the movies App.
    Any thoughts on how to fix the iPhone 4?  I have already done a restore, to no avail.

    Thanks for the tip.  I assume you meant the option in iTunes to sync over Wi Fi, or the option to Back-up to iCloud.  The problematic iPhone 4 does not back-up to iCloud, and I tried de-selecting Sync over Wi-Fi.  Same issue exists:
    iTunes shows that the videos are on the phone, but I cannot locate them on the actual iPhone using the "Videos" app. 

  • Cannot see sent messages

    Absolute BB newbie, just received an 8320.  I think I've figured out most of the basics, but cannot seem to make my sent messages visible. I have checked to be sure "hide sent messages" is set to "no", set it to "yes", than reset it to "no", pulled the battery for 30 seconds, tried standing on my head and screaming at it... also, the sent messages folder is empty.  Is this a glitch, or am I being stupid?

    Hi
    first I would guess that you created your account as a POP3 account. That would lead to the problem that sent emails only exist on the one computer you were sending the email from.
    Please let us know if the email accounts are POP3 or IMAP.
    regards
    Marcel

  • HT5361 Hi Can anyone help me. For some reason I cannot see any messages in my in-box. How can i get them back.

    Hi For some reson when i opened Mail ther are no messages in my inbox. There have all disappeared. Does anyone know how I can get them back please. Thanks

    Back up all data. Rebuild the mailbox.

  • HT4191 I can sync Outlook notes through iTunes to iPad and iTouch but not iPhone3GS. I cannot see "Sync notes with Outlook" under info for iPhone but the other two work fine. Same settings on all !!! What do to next ??

    I have iPad3, iPhone3GS and iTouch all set up with latest software. I sync with a Sony VAIO and the sync is fine and complete with the iPad and iTouch. The iPhone refuses to allow syncing of Outlook Notes from laptop to iPhone. On both other devices the sync of Outlook Notes and everything else works fine. I have follwed other blog suggestions and erased/added accounts, checked that there are not any Notes with no data or headings and all the other ideas but to no avail. The difficulty is only with Notes syncing to the iPhone, works fine with iPad and iTouch.
    What do I do next ?

    The apple store fixed it for me. They basically said I had too many "calendar" sources checked. They eliminated all but the calendar "from my PC". When I open the iPhone calendar, and click on the upper left calendar button, only one calendar shows up (from my PC). iCloud calendar is off, google calendar off, etc.

  • Cannot SEE/Sync iPhone4 in iTunes after downgrading to OS 10.6.6

    I had installed the 10.6.7 update last week when it first became available, making the mistake that it was a very simple update. But as I'm sure everyone knows by now, it's font issues significantly affected PDF creation and viewing. So much so for us, that I had to downgrade back to 10.6.6.
    Though the reinstall of the OS worked fine, since then, my phone is no longer recognized by iTunes.
    Again, System is currently 10.6.6 though I had previously installed the 10.6.7 update.
    iTunes version is 10.2.1 (1).
    MacPro Quad Core
    iPhone4, iOS v4.3(8F190)
    I'm sure this has something to do with the downgrade, but I've been searching for answers for the past couple days and haven't seen this specific issue.
    Anyone have any ideas?
    Thanks!
    Message was edited by: Jim Curl
    Message was edited by: Jim Curl

    Okay, I figured it out.
    Shoulda just tried this before I posted in Discussions...
    I deleted iTunes (completely), and reinstalled.
    In case you need help doing that: http://support.apple.com/kb/HT1224
    Now everything is working fine again.

  • Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

    Hi all,
    I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
    1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
    2. SLD is OK: Technical System and Business System are correct for these two SAP System.
    3. Integration Repository: all designed Object is OK.
    4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
    5. Runtime WorkBench: is OK. "Test Message"  Function of "Integration Server" is OK.
    In general, it is all OK.
    But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from  this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
    Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
    Thanks a lot for all in advance,
    Best regards,
    Vinh vo

    Hi,
    Possible checks
    At R/3 side
    1) Check in SMQ1 and SM58
    At XI Side
    1) Check in SMQ2 and IDX5
    Check this
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    Regards
    Seshagiri

  • When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

    Question
    When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

    The Cannot Setup Sync message indicates that you don't have internet access. Check that you can get your phone online (3g or wifi) and then try to connect again.

  • How can I find  sync message  in Adapter Engine Table

    Hi,
    I see async message in Table(XI_AF_MSG , XI_AF_MSG_AUDIT)
    But don't see sync message.
    Where is sync message stored in Adapter Engine?
    Can anybody help me!!

    Hi,
    Refer this Doc..
    http://help.sap.com/bp_bpmv130/Documentation/Operation/TuningGuide.pdf
    regards,
    vasanth.

Maybe you are looking for

  • How can I create a folders of apps for multiple users?

    I use several iPads with my students and would like to set up a folder for each student. I want to place "an alias" of each app the student uses in their folder. On my Mac, I can "make alias" and place aliases in seperate folders. How can I do that o

  • How to create complecated Header for JTable in a JApplet ?

    I have one JTable in a JApplet. I need to create a complecated header for the table. For that I have used a downloaded code in the URL http://www2.gol.com/users/tame/swing/examples/JTableExamples1.html (First example). Instead of "GroupableHeaderExam

  • Query on Materialized View Logs

    We need a denormalised data step-up, we decided on implementing Materialized Views and started working on them. I have created Materialized View log on a table using below mentioned syntax CREATE MATERIALIZED VIEW LOG ON <table_name> WITH ROWID I hav

  • InfoObject Help taking more time in BI web report Input screen

    Hi all, i am having a report consist of 3 variables .So, when ever i will execute it, variable screen will pop up. Now, There is an object name as "Master Location" , and it is having variable . Now, the problem is when i click on the help of Master

  • Row_number() -SQL function throws error - SAP B1 2005 B - PL 36

    hi experts, when i try 2 run "SELECT * FROM (SELECT ROW_NUMBER() OVER (ORDER BY CardName) AS RowNo,CardCode,CardName FROM OCRD Where CARDTYPE='C') AS OCRD" query in SAP B1 2005 B, PL-36 it shows an error -server throw an exception. anybody can commen