Cannot see the appended fields on BW side

Hello all,
I appended the extract structure of a datasource (added two fields), I can see those field in RSA6 and can see the data in RSA3. Then I replicate it on BW side and am trying to create transformation between that datasource and DSO but I cannot see the added fields in the transformation rules so that I can map it to the infoobjects in DSO. When I see the fields tab of datasource (in datasource tab in RSA1) I can see those two fields but I am not getting now how do I map it with DSO objects.
Can someone throw some light please.
Thanks,
Kiran

hello all,
I tried same thing completely by using 3.x method transfer rules and update rules and it works good.
I finally can see the appended fields. I did the whole process as the 3.x method, transferred the fields in transfer structure, added my infoobjects in communication structure and then did the transfer rules. So now finally I am able to see the fields in datasource and now I am able to map the source fields to the target fields (Z infoobjects) in DSO.
I can see the data in PSA, so I just went ahead and did a direct assignment so that data will go to the target infoobjects but for some reason still those columns are blank, so basically there is data in PSA but its not getting to DSO.
Do we have to anything different in this new version like write a routine or something in transformation rules?
Are these steps right for the new version NW 2004s, or is there any additional step in this new version.
Thanks,
Kiran
Message was edited by: Kiran Mehendale

Similar Messages

In Mass Maintenance (MM46) cannot see the Z field.

Hi Guys,
In Mass Maintenance MM46, I am unable to see the Z field which are maintained in transparent table Marc..
Code has been maintained in BADI. However it is not showing it.. what could be the possible reason for not showing it.
Thanks
Sandeep

.

I updated to the latest version and now I do not have the page controls at the right hand side and bottom and can only move the page up and down using the mouse scroll wheel. I also cannot see the whole page I am trying to view.

When I open the web browser I cannot see the whole page and I cannot move the image sideways and must use the mouse scroll to move up and down.

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

We cannot see the segment in the vendor line item

Hi,
We have updated the Segment field as Optional in OB41 transaction for posting key equal to 21 and the same for the corresponding GL account. When we create a document in FB01 transaction with SA type for example, we can't see the segment field in the vendor line item.
Could you tell me if we need to do something more to see the segment?
Thanks in advance,
SAP user

Hi,
whe we are entering the vendor line item we can enter the Fund and fund Center, our segment will be derived from the fund ( we have done it in a substitution, if the segment is empty we derive it from the fund) and in BSEG table we can see that the segment is filled correctly. But we cannot change it because this fields segment don't appear in the screen. We have reviewed the SAPMF05A 0332 Screen (screen that we can see when we are entering the vendor line item and we push in "More data" button) but the segment field don't appear.
Thanks in advance,
Sap Userr

POST-QUERY trigger cannot retrieve the database field in TEMPLATE.fmb

I have tried to create a form using TEMPLATE.fmb in Oracle Apps R11i. I found that the POST-QUERY trigger cannot retrieve the database field (which is display item property) properly. Can anyone tell me how to retrieve the displayed database fields? Thanks for any helps.

POST-QUERY would fire after the query has been executed, it does not do the actual data retrieve.
See if the items you have put have the data source properties set and are not control items.
btw, this forum is for OA users, you would get better response to your query if you post it in forms forum
Thanks,
Tapash

Table for checking the appended fields in the standard extractor

Hello,
Please let me know the table name for checking the appended fields in the standard extractor.
Thanks in advance

Hello,
From Rsa6 , goto your extractor from there you may get the name of your strucutre
Go to DD03L and enter this name
And you get to see all the fields there..
waiting for your feedback.
Regards
Nitin Bhatia

Hi, i've just bought my first macbook pro, i just installed office mac and when i open the page i cannot see the minimise maximise and close buttons as it's hidden behind the apple menu bar, also when it's at full screen, those buttons do not appear

hi, i've just bought my first macbook pro, i just installed office mac and when i open the page i cannot see the minimise maximise and close buttons as it's hidden behind the apple menu bar, also when it's at full screen, those buttons do not appear

Try to edit the size of the page using the sides of the page, or if you are desperate, force quit using command-Q. In full screen put your cursor on the top of the page, and the menu bar will appear. If it doesn't keep "pushing" it up until it does. Hope this helps!

My MacAir cannot see the same WiFi router twice, why?

My MacAir cannot see the same WiFi router twice, why?
So if it gets connected to a WiFi then gets disconnected for any reason, I cannot reconnect it to the same WiFi again as it cannot see that specific router again.
Unless, in my case, I turn on my Galaxy note 10.1 Tethering hotspot which it sees ALL the time then the Wifi router shows again so I can reconnect to it.
This happens at home and at work and at any other place... so No, there is no problem with my router or WiFi connection.
it is really getting to my nerves.
the whole purpose of me getting a MacAir is the light weight!
Now I have to carry my Galaxy Note 10.1 around with me, especially if I am going out, so I can get connected to WiFi!!
Can anyone help me out!

Try the following on your MBP, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#

Paste from Illustrator to Photoshop, I cannot see the pasted object

Sorry for this dumb question but I have tried everything I can think of before asking this question. I have a single grouped object in Illustrator and I select the object and "Copy". Then I open up a new photoshop project and choose "Paste". Then I get four questions:
Smart Object, Pixles, Path and Shape Layer to choose from. No matter which one I choose I get a large box with an X. I cannot see the object just the box that is x'd out. This must mean something but I cannot figure it out. When I place it dissapears.
Please what is the secret to pasting objects into Windows Photoshop CS4?
Thanks, Brent

Magically, pasting started working. Maybe, my computer was running out of memory or something.
Thanks for your helpful answer.
-Brent

I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

I have an iphone 4 and an HP Pavillion with windows 7. I always have been able to connect my iphone to my laptop and open
the DCIM folder and see the picture icons so I can pick the ones I want to download. After upgrading to iOS8 I cannot see the icons after a
few seconds of connecting the phone to the computer. They all turn into the windows icon.
I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred. I don't want all the pictures I take on my computer.

http://support.apple.com/kb/HT1808

User cannot see the "-" signs on amounts in ALV report

Hi all,
We have a problem with a user, who cannot see the signs on the amounts in an ALV report:
<a href="http://img66.imageshack.us/img66/1424/nataliabr9.jpg">Report without signs</a>
The user has tested this report with his user, and another test user, on his computer and on another computer. It does not change anything, he cannot see the signs "-" on the amounts.
But when I launch the same report on the same client, I cann see the signs:
<a href="http://img398.imageshack.us/img398/1203/moigl3.jpg">Report with signs</a>
So, I think it does not come from his user (he has tested with two different users), or from his computer (he has tested on two different computers).
Do you have any ideas?
Thanks for your help.

Having seen and "played" with an NB100-12a the other day I must agree that the grey letters on black keys
aren't a clever idea - its bad enough that the keys are so small also.
I currently own a satellite Pro with which I am very happy ( apart from the inclusion of Windows Vista which I
don't particularily like ) and found this machine easy to "drive" BUT due to the keyboard size and lettering
I won't be buying one ( unless they do a redesign - an acer aspire one keyboard and touchpad or NC10 style
design ) and I think that the price of these machines has recently dropped from approx £300 to approx £270
due to poor take up by the public mainly for the above reasons.
Sorry Toshiba looks like i'll be buying an NC10 - unless I hear of a possible redesign.#
Mike

I cannot see the print button on the bottom tab in order to print a document even when I hide to tool bar.

I recently changed my computer software from Vista to Window & Ultimate. Since changing, I cannot see the print button which should be at the bottom. I have tried to hide the bottom toolbar but it still does not allow me to see the print button. Please give me directions in easy to read English.

If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
*"View > Toolbars"
Open the Customize window to set which toolbar items to display:
*View > Toolbars > Customize
*Firefox > Options > Toolbar Layout
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

HT201335 I cannot see the airplay icon on my iPad both iPad and Apple TV on same network help me

I cannot see the airplay icon on my iPad both iPad and Apple TV on same network help me?

ipad1 don't support airplay mirror

Cannot see the appended fields on BW side

Similar Messages

Maybe you are looking for