Cannot see the system in sld

Hi
I just installed Web AS 7.0 and EP7.0 (NW2004s). The SLD is located in another system. While installing I choose the option 'conntect to the existing SDL'
but now after the installation I do not see the system I just installed in the SLD.
Also when I checkd in Visual Admin and checked the SLD Data Supplier, everything looks correct and status is runniing and when I triggered a data transfer I get the following error
Operation failed! Failed to collect SLD data. Failed to send HTTP data:401: Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.
Can anyone please guide me what I am missing here.
Thank You
-Mark

I am also having the same problem. I am unable to see the adminstartor link enabled in the SLD screen to start the data bridges and sld server. can any one tell me how to get admin link to be enabled. I have already created the lcr role and assigned it to sldadministrator role and mapped admin user to this group and cliked the button in sld data supplier using VA. but still I am facing the same problem

Similar Messages

Cannot see the system folder(private work area) in the dependency manager

Hi
I am not able to see the 'system folder'(private work area) in the dependency manager tool.
I have captured the user schema in this folder, and want to see dependency information of objects in it.
Please Help.
Thanks

Hi Guru,
Please go through SAP note # 1333684 and configure accordingly.
Also, follow the note # 1042993, if problem is not getting resolved.
Thanks
Pavan

Does Mac Messenger work with iPhone 4 system 5.01...? (I am receiving a notification of receipt but cannot see the messages sent.)

To those who might know
I have an iPhone 4, with OS 5.1
I am receiving notifications of messages sent by various other users but cannot see the messages.
Question: does Mac Messenger only work with 4S models..?
Thanks.

a successful automount of the other mini cd gives me
$dmesg | tail
[ 5667.156904] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5667.157448] ISOFS: changing to secondary root
and
$mount
/dev/sr0 on /media/110103_1110 type iso9660 (ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks)
and there is a /dev/sg1 under /dev (instead of only sr0 before~~)
(nothing changed in lshw (well, except the mount point is added~~~))

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

HT204291 i cannot see the video but i can heard

i heard the show but i cannot see the image

Is your version of Skype known to work with your operating system version?

Cannot see BI system in search

Hi experts,
I have configured BI backend system from CE portal and the connection test is successful. However, after I configured, I logged into VC and cannot find BI system I configured in "Search" drop-down list. I can only see Web service destination and RFC destination. What shall I do to solve it? Did I lose any step? I followed the configuration guide from here "http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm".
Best Regards
Tom

Hi Tom,
I have never made a connection to BI or any SAP System but a JDBC connection from the portal and did all the necessary steps, even though the test connection did not succeed, I could still see the system in VC.
In your steps, I do miss step 6 of the documentation, did you do this as well, may this is something which is required?
6.      Maintain the properties in the following categories:
○       BI/Business Intelligence
■       BI Directory Provider: yes
■       BI Master System: yes
One of the connected BI systems has to be the BI master system. If you are only connecting one BI system, choose Yes. If you are connecting more than one BI system, choose Yes for one system and No for the remaining system.
○       Connector
■       Group: Logon group of back-end system
■       Message Server: Message server of back-end system
■       Remote Host Type: 3
■       SAP Client: Client of back-end system
■       SAP System ID (SID): System ID of back-end system
■       System Type: SAP_BW
You can find the values for the logon group, system ID, and message server from the properties in the SAPGUI logon for the BI back-end system.
Best regards,
Dharmi

I am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

Is your version of Skype known to work with your operating system version?

My MacBook Pro 2.33GHz cannot see the New Airport Extreme

Just bought the new Airport Extreme(Wireless N). Power it up, cannot see the new wireless network under the Airport signal icon. The Machine have no problem using my older Netgear wireless router(G) and the new Linksys Wire router(N). Just connot see the new Apple Airport Extreme.
My the other two iMac(G5 and Intel) 20" can see all three wireless network and connet to them without any problem.
My only question is has Apple implement any "regional code" on the hardware. My MacBook Pro is from US and the new Airport Extreme was bought in New Zealand.
Any suggestion? BTW a clean install of the System didn't help. Found out after 2-3 hours of installation of System and all my Application back.

To use the Airport Utility you must select your network under that Airport icon but you can't. So what to try? Of course you may need to reset your router. If still not visually seen under Airport then go to system preferences/network/status and choose Airport. Look for the preferred drop down menu. If network is seeen then select it and hit apply. Then select under Airport icon then use the Airport Utility. If not seen in preferred then type in your network exact name or use the + button. The above will work you just need to keep trying.

Photos cannot find the system photo library

I’m in trouble. I was deleting photos in ‘pictures’ as I wanted to clean up some space on my iMac. My assumption was that ‘pictures' is completely separate to iPhoto (or photos as it is now called). I then go back into photos (the old iPhoto) and get the message 'photos cannot find the system photo library’.
I cannot access any photos at all. I’m working on a large project this weekend and I have purchased hundreds of photos over the last 6 months which I require for the project. Blood pressure boiling at the moment!
Any help please

davidpotterdp wrote:
You absolute genius. When I pressed alt and photos it gave me the option to open the ‘old version’ of iPhoto!!
Just so I don’t mess up again. How do I now get the old iPhotos back into photo?
I did try to look on my time capsule but when I viewed the last back up from this morning, there was no photo in the sidebar to even open?
I’m new to the forum. I did call Apple but probably not wise for me to articulate on this forum what they said!
The iPhoto migration to Photos would have been automatic when you upgraded - there is presumably a way to kickstart that again though I'm not certain how as I've not done so.
If you have a Time Capsule that's great.
I'll see if I can get some others to chip in.
Also, if you can still open iPhoto you can of course continue to use that for the time being.

My MacAir cannot see the same WiFi router twice, why?

My MacAir cannot see the same WiFi router twice, why?
So if it gets connected to a WiFi then gets disconnected for any reason, I cannot reconnect it to the same WiFi again as it cannot see that specific router again.
Unless, in my case, I turn on my Galaxy note 10.1 Tethering hotspot which it sees ALL the time then the Wifi router shows again so I can reconnect to it.
This happens at home and at work and at any other place... so No, there is no problem with my router or WiFi connection.
it is really getting to my nerves.
the whole purpose of me getting a MacAir is the light weight!
Now I have to carry my Galaxy Note 10.1 around with me, especially if I am going out, so I can get connected to WiFi!!
Can anyone help me out!

Try the following on your MBP, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Why I cannot see the "Java Development " tag when I finished installation

Hi all
I have finished my reinstall of SAP Netweaver, and granted administrator all roles, but I still cannot see the "Java Development" tag in the head of the page. I don't know why.
How can I do it?
Regards

Hi Wang,
The Java development role comes after the installation of the PDK file to your portal.
For Java development role, download the latest PDK from SDN and then import the .epa file in the portal. After its installation you will see the Java Devlopment role. Assign the role to the user and refresh the portal.
Follow these steps:
Once you have downloaded the PDK. Just extract it. You would have got the .rar file. For extracting this you use some rar extracter. If you want you can download the winrar from the following site:
Winrar Setup: http://www.freedownloadscenter.com/Utilities/Compression_and_Zip_File_Utilities/WinRAR.html
Then you can import this epa file into portal. When you will import this .epa file a new role for Java development will be added to the portal. Assign this role to your User.
For importing the .epa file .epa file u need to import from the portal (System Admin>Transport>Import). Here just give the path of your extracted .epa file.
Role Name: com.sap.pdk.JavaDeveloper
Now you are ready to use the PDK from EP.
I hope this helps you!!
Regards
Pravesh
PS: Please consider rewarding points if helpful or solved.

I cannot see the details of the playing song on iTunes Radio.

I cannot see the details of the playing song on iTunes Radio on my iOS Devices. On pc and mac it's fine but on all my iOS devices, the album artwork, title and artist info is missing; however, the song plays. I can see the songs i played on my iPad when i open up iTunes on my pc. I restarted the device, logged out and in several times with my apple id, nothing changes.

Hi, I have this problem too. I've uploaded photos of my granddaughter to iCloud Drive on my 5 year old PC and can see the content on my PC at iCloud .com - though the system does not allow me to see minimised photos, just lots of numbered, blue rectangle icons. I spent over 2.5 hours with Apple Support yesterday and they could NOT resolve the issue in any straightforward manner, though did suggest I go through the same time consuming uploading process placing the same photos in the Beta version of 'Photos' available at iCloud.com. What a cumbersome system. Why hasn't Apple offered an iCloud Drive app (free of charge) so that once content has been placed in iCloud Drive it can Bev retrieved on any iOS device, as Apple suggest. Here is what they say at Apple.com (see also the illustrations they offer for iCloud Drive on an iPad - I was informed yesterday, by two advisors, that they couldn't find way to locate the suggested pages either?)
Storing ﬁles in iCloud is simple. Just as it should be.
To upload your files to iCloud, simply drag them into the iCloud Drive on your Mac running OS X Yosemite or PC running Windows 7 or later. Or start a new document using an iCloud-enabled app on your iOS device. Then you’ll be able to access those documents from all your devices.

Cannot see the USB printer attached to my TC (Mac Air, Maverick, Air - TC via ethernet)

I cannot see the USB printer I attached to my Time Capsule's USB port. I am using a Mac Air, with Maverick OS, and connecting between my Mac and the TC via an ethernet link. Suggestions?

Not sure what you mean by "see" the USB printer.
If you simply plugged the printer in to the Time Capsule, it will not be "seen" by anything.
You won't "see" the printer until you use System Preferences > Print & Scan on both of your Macs to "Add" the printer. Did you do this for both Macs?

I have enabling home sharing on my mac and pc and I cannot see the icom on itunes

I cannot see the home shared on my MAC or my PC.
I alos cannot share playlist either when I try.......HELP!

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Cannot see the system in sld

Similar Messages

Maybe you are looking for