Cannot see the USB printer attached to my TC (Mac Air, Maverick, Air - TC via ethernet)

I cannot see the USB printer I attached to my Time Capsule's USB port.  I am using a Mac Air, with Maverick OS, and connecting between my Mac and the TC via an ethernet link.  Suggestions?

Not sure what you mean by "see" the USB printer.
If you simply plugged the printer in to the Time Capsule, it will not be "seen" by anything.
You won't "see" the printer until you use System Preferences > Print & Scan on both of your Macs to "Add" the printer. Did you do this for both Macs?

Similar Messages

  • HT5634 The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set uo

    The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set up.
    I have downloaded windows support software from Apple 3 time with the same result.  Where can I get a clean copy of the Windows support software?

    Did you correctly format your usb stick in accordance with the Boot Camp installation instructions? Go here to the Boot Camp System Requirements page, http://support.apple.com/kb/HT5634, look for your computer model/year and download the correct version of Windows Support software.

  • AirDisk - cannot see the USB disk in Finder

    Dear all,
    I just brought the Airport Extreme Base Station with the purpose to use an external HD shared with all my Macs
    The AEBS works quite well, but I’m not able to see the USB disk in the Finder…
    In the airport utility I can easily see that AEBS recognize the USB disk, and that that disk is connected, and I’m sure that that disk works well and that is formatted as Mac OS Extended
    Even after checking the huge problem affecting this firmware release (mine is 7.2.1) and following all of the suggestion posted by the community (connect, disconnect, restart, pray for an update) I cannot even see the disk in Finder…
    I’ve heard of people that cannot mount or access or disconnect… but I cannot really see the disk itself…
    Any suggestion?
    Thank you very much in advance

    Hi!
    I got mine working now! As the problem started to seem like an authentication issue (disk was in "connecting" mode for eternity) I started to think that the problem might be actually in MacBook Pro/Leopard end of the system rather than in the Airport Extreme or AirDisk. I tried then to create a new account and "account preferences" application got all stuck - was not possible even to force quit. I then forced the MacBook to shut down with the power button and rebooted. A miracle happened! Now I can see the folders of the AirDisk and can copy there. Next I will test whether I also have the same problem that backup with Leopard to AirDisk is extremely (read prohibitive) slow.
    I hope this simple trick helps others as well
    I am keenly waiting for the next Leopard update... have to say that being used to great Apple user experience this has been a major disappointment. It seems that Apple is leaving us alone with our problems. They should facilitate somehow these forums and pull together FAQ's as suggested by many.
    br pertti

  • The view of the navigation bar has shrunk and I cannot see the tiny print in search box and page location box.

    How do I increase the size of the view within these 2 areas in the navigation bar?. The icons on the bar have not shrunk. I have Windows 7 and FF 19.0.2 which I just reinstalled.

    Are you using any DPI related settings in Windows to increases the font size?
    * Control Panel > Personalization : Adjust font size (DPI) or in Window Color and Appearance
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • We recently changed routers, and I cannot make the mp620 printer/scanner respond to my Mac anymore.

    I am not sure how to make my printer come back to life after a change in router.  Please help.

    if you installed a new router you need to connect the printer wirelessly to the router again.
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp620#Wi...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • USB port on wrt610n i can see the drive but cannot see the content

    USB port on wrt610n i can see the drive but cannot see the content
    I have followed the instructions I see the drive but when I try to acess the drive I get a empty new folder
    help I am lostwhat should i do

    winmaco wrote:
    Yes i have it is working on my PC
    One thing in setting up the usb I had to use a different password
    my router has a password and the only way I could move forward was to use the default admin admin user name and password
    I could not use my router user name and password.
    The username and password for the share on your attached drive can be anything you want them to be. I assume you set up a share on the attached drive? That's where you need to add a password for the share, although for ease of use I never did assign a password to the shares.
    You do know that the firmware for the Storage Link is buggy, right? File size limitations as well as file corruption issues? Connectivity issues also rise up, with the only workaround that I have found is a script that you have to run every time you boot up your computer. As far as I can see the Storage Link function is a poorly implemented idea. No firmware in sight to fix the issues, and no idea of when.

  • I cannot see the print button on the bottom tab in order to print a document even when I hide to tool bar.

    I recently changed my computer software from Vista to Window & Ultimate. Since changing, I cannot see the print button which should be at the bottom. I have tried to hide the bottom toolbar but it still does not allow me to see the print button. Please give me directions in easy to read English.

    If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
    *"View > Toolbars"
    Open the Customize window to set which toolbar items to display:
    *View > Toolbars > Customize
    *Firefox > Options > Toolbar Layout
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • Cashier cannot see the some documents for cheque printing

    Some Payment proposals have been made but the Cashier cannot see the documents for cheque printing. They are showing complete when you check with T.code SWIA.
    What could be the reason?
    Regards,
    Chansa

    Dear  Vivek,
    Yes the cashier cannot see these documents in SBWP.
    regards,
    Chansa.

  • In using MS Word for mac, and using track changes, and I send a copy, the recipient cannot see the track changes, nor do they show up on the printed copies, even though I highlight show changes in print

    In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

    In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

  • Cannot see the printer options or preferences page

    Hi,
    We have a number of computers that cannot see the printer options or the preferences page options. See the print screen below to see what i mean...
    I've reinstalled adober reader X, with no luck.
    Has anyone else had the same issue?
    Cheers

    Hi, unfortunately, I have the same problem: After installing Adobe Reader 10.1 on my MacBook 3,1 OS 10.6.8, printing pdf-files is impossible as the printer options / preference page is not shown anymore. I have reinstalled AR 10.1, I have reinstalled Snow Leopard, I have reinstalled AR 10.1 without success. Only once, there was a hint by AR: "internal problem, lack of ressource file". Other files (preview, MS word, etc.) print without problems. I would be glad to receive a hint how to solve this problem.

  • HT1843 hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    It isn't supposed to pair with the MacBook.  You can use WiFi to connect but not Bluetooth.  You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
    The communications are rather limited.

  • I cannot see the NI-DAQmx icon in measuremen​t window in Labview 2013 (student Edition)

    Hi All:
    I have installed NI-DAQmx and Labview 2013 (Student Edition). I have connected an NI USB-6008 DAQ and tested it using NI-DAQmx and it is working properly.
    Now I tried to do logging of data from this device using the installed Labview software but as I  open a new project and go to Block Diagram screen and display the measurement menu I cannot see the NI-DAQmx icon in the measurement window (Menu) within Labview 2013 (student Edition).
    Any suggestion?
    I am attaching two screen shots.
    Please help.
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    1.png ‏77 KB
    2.png ‏88 KB

    In which order did you install the software packages?
    You should install LabVIEW first, followed by DeviceDrivers!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctio​ned

    Hi,
    I have this printer HP Laser M1522nf.It was working fine till today.Suddenly it has started giveng this error
    "HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned"
    This error is not on printer but on my computer when I connect the printer USB cable.I have 3 laptops all have winxp installed on them.I have tried connecting the printer with all laptops and they all give the same error with reference to connecting usb printer cable and Malfunctioning.
    Appreciate your gracious advice and guidance in this regard,
    Many thanks

    Is this at an office and you are logged in not as an administrator?
    If that's not the case, then the message maybe true, that it did malfunction, and need to be serviced. (assuming you already tried power cycle the printer, making sure doors/trays are all properly put in.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • My computer will not recognize my ipod touch anymore. When I plug it in it says the USB device attached to this computer has malfunctioned and windows doesn not recognize it.

    My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized.  Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
    Hope this helps

Maybe you are looking for

  • Vista Upgrade - No Longer Synchs Files iTunes to iPod Nano

    What a nightmare - iTunes/iPod worked beautifully with XP - but when I upgraded to Vista it stopped synchronising all my files onto my iPod. Some files says "I am not authorised to use on this computer". Tried to re-authorise but iTunes (despite reco

  • I need an AC Adapter for Satellite P300

    I'm from Canada first off, I know this is a Europe forum... Ok, so my question is my AC stopped working and it's not covered under the warrenty, So I was hoping that you guys could put me in the right direction of getting an adapter cheap, whether of

  • Extending wireless range

    I have an iBook G4 with an Airport Extreme card installed. I have just installed a Belkin Wireless G Plus Router. My house is a large, old one and my router is in the attic, where my cable modem is located. I would like to extend the range of my wire

  • Audio Tags in PDF do not play when in remote access

    Have Acrobat Reader latest version installed on a Windows 8.1. When using remote access to play audio's all is fine but audio tags embedded in pdf's do not play? Any thoughts on issue here?

  • Oracle BPEL Polling Database Adapter

    Can someone give me sample or link of db polling ? i tired in following way 1. created db adapter with logical delete option 2. then created bpel process based on wsdl i tired inserting new data but my instance did not get executed?