Cannot see Wireless IP Camera via WAN

Router:WRT54GC
IP Camera: Chinese EBAY special
I have a Wireless IP Camera connected to the router. Everything works fine on the LAN.
I can connect from within the LAN using the Camera IP (&port) and the external router IP(&port).
I cannot see it outside the LAN though.
I have forwarded the correct port for the IP of the Camera and confirmed the port is open on the net. (Have tried static and automatically obtained)
I can ping the Routers external IP from the WAN but cannot see the Camera.
Have read every thread on here.
This one was helpful:
http://homecommunity.cisco.com/t5/Wireless-Routers/WRT160N-v2-with-IP-camera-BLC131-CE/m-p/300838#M1...
I couldn't ping the router until I disabled "Block anonymous internet requests" but can now.
Although putting the router ip in a browser doesn't give me remote management (if it should?)
Any ideas?

HI,
My ISP is Virgin Media (I'm in the UK)
My WAN IP is 92.236.14.192 - I can ping that from outwith the LAN. I can also use remote management using it with por t8080 so connectivity is ok.
I've forwarded port 1025 for the Cameras IP - port 80 is already in there forwarded with the routers IP, this must be a default one?
I'll change that and see if it helps.
port 1025 is open, I checked with the "canyouseeme" site.
thanks for your help!

Similar Messages

Why I cannot see my IP-Cam on the iPad2?

Hi there,
I am writing from Germany - hope you can understand my terrible English.
I installed an IP-Cam, but I cannot see them in my iPad2.
You can see the cam here
http://kieckbusch.dyndns.org/index.htm
A friend of mine has a iPad3 and has no problems to see the cam.
What I have to do to see the picture of the cam?
Thank you in advanced,
Wolfgang

No advanced..
The WD will pickup an ip from the router.. sadly apple routers give you no info about IP of the device they pickup on ethernet.
Go to your computer .. open the network utility, and do a netstat scan .. the IP of the WD should be listed.
You can also use an iOS utility like Fing.. which does the same kind of thing.. scans the network for all the clients you have connected.
Once you determine its IP you can mount it in the computer..
But it should be accessible also by simply typing the IP or name into a browser.. did you read the instructions for setting up WD NAS in your network.

Ipad cannot see wireless network

Hi, I have a wireless network using several Cisco 1131AG wireless access points. I have several Mac computers that see the wireless SSID and connect to the internet wirelessly. However, Ipads and Iphones don't see the wireless network. They cannot see the SSID at all. I have tried ipad 2, iphone 4 and 5. The network is not secured at this point. Any help with this would be appreciated.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

DeskJet F4583 cannot see wireless network

Hi,
I am trying to put my F4583 on the network but it cannot see the router.
I ask the utility to scan and it comes back and sees nothing (there are four or five in my neighbourhood).
I type in the exact SSID name and it still cannot find the network. The blue wireless light just sits a blinks slowly.
Any ideas?

Have you tried unplugging the power cable on the printer and plugging it back and they trying to search for the network?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

PC cannot see wireless Airport Express using Ethernet on D-LINK DIR-655 Router

This seems to be a recurring issue going way back, but I have yet to see a real solution posted.
I am using my Airport Express (APX) to stream music from the computers on my network to my stereo via Airplay. I have APX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my APX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my APX. I can, however, see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the APX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting the APX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting APX when I turn their wireless connections back on. So, bottom line, I am convinced that this is not a firewall problem. Although I have tried every conceivable setting of my D-Link router and APX, I am convinced it is either a wireless to ethernet communication issue, or some obscure setting on APX.. Any help would be appreciated.
Thanks,
Wayne

I think I found the fix based on reading some Apple TV forums where several people were having the same problem. Under Advanced Network settings in the D-Link setup, I just checked "Enable Multicast Streams" and that seemed to do the trick.

HP ProDesk 400 G1 - Cannot "see" wireless connections

I just purchased this machine; it's running Windows 7 Pro. It does not see or recognize any wireless networks, even though there are about a dozen in my immediate neighborhood, including the one in my house to which my other computers are connected.
I have opened the network and sharing center and run the troubleshooting routine, and the message I get suggests that I plug in an ethernet cable or use a dial-up connection since there are no wireless connections. I have tried everything I know to get this solved, butr have run out of ideas. I know it is not the network itself, as my other machines connect with no problems. Please help. (I should be under warranty, but for some reason my serial number is not recognized and so I can't get to the warranty center online.)

I've just been shopping for the same model HP and have discovered that the base model of this particular series does not include integrated wireless. It only ships with an ethernet port (RJ-45). Looking at the system configuration control console should allow you to see how the system is set up.
If you're not configured with wireless access hardware, you may need to order a wireless LAN card or use a USB wireless device in order to find the local networks. If you are configured with wireless and still can't connect, you'll need to consider a local tech or having the system returned for warranty service if it's still covered.

Cannot see Pages/Keynote files via WebDAV

I am using the DropDAV WebDAV offering for dropbox. It works great for Numbers. For Pages and Keynote, when I try to do a Copy from WebDAV, I am unable to see both .doc and .docx files in the directory drill down. I am able to see them from the WebDAV client app. Also, I am able to open these files thru Dropbox directly into Pages, but when I go to Copy them to WebDAV, it appears to work, but not files ever get copied.
Any help would be appreciated.
Thanks.

Well, we had some problerms using dropdav.com, so we switched to cloudsafe.com - On a Mac we connect via "Transmit" WebDAV client.
Best,
Apple*

I cannot get wireless security setup via Linksys router web page

Help. I'm trying to reset my router. I've gottne through everything and all is setup and working but now I cannot setup the wireless security. I'm go to Wireless>Wireless Security, when trying to choose security mode I can select it, the page refreshes, but just goes back to 'Disabled'. I can't get pat this, I get nothing. Is my router fried and it just won't allow me to setup security? I've tried everything. I'm on a Mac, but dont believe that should make a difference. Is there another setting somewhere? I did change my password and name of the router, but that's all the farther I got. I've followed all of the steps and get stuck on the page and drop down. Driving me nuts!

I opened in Firefox and was actually able to choose WPA, the settings opened up and then the page locked up, refresh took me back to 'disabled'. Reopened in a new window, opened up again, entered the WPA shared key and after spinning for over 5 minutes, lost my connection and had to log in to join my now secure network...finally!!!!!! Thank you.

IMovie 5.0.2 Cannot See Canon DV Camera

Running iMovie HD 5.0.2. Previous version of iMovie 4 worked fine with my Canon ZR300 DV camera. Now, iMovie says no camera attached. Connected vi USB.
Have tried every combination of powering on and plugging. in.
Thoughts anybody?

...So it would seem that Apple sold me a camera that doe snot work with iMiovie (as it does not have a firewire port)...
Canon sold you a camera without the right cable
you nee a 4pin/6pin firewire cable, at any electronic supply, ~2$

I cannot see my DV camera connected to firewire on my iMac.

I use parallell desktop and Win. XP with Movie Edit Pro. No DV camera is seen in iMovie either when I do not use parallell desktop. The only camera that is shown is the built in webcamera. I use a standard Mac firewire cable, Camera is an older Sony DV camera, DV cassette based. The only reason why I chose a mac is to connect a DV camera and edit video. FCP from Apple is too expensive, and I know Movie Edit Pro from Magix inside out, a superb video editing program. Can anyone help asap, pls.?
<Edited by Host>

I may add this: Brand new iMac, 8Gb RAM, 2,5 Ghz i5 processor with Lion updated OS as of 31st Oct. 2011, using Parallel Desktop bought 16th Oct. 2011, running Windows XP with service pack 2. No camera except built-in webcam shows up in any software, neither using Mac OS or Win. XP.

ACS v.5 cannot be added as secondary via WAN

Hi,
i have planned a deployment with one acs in Europe working as primary, one acs in europe as secondary and one acs in USA as secondary also.
I can add one acs in europe to the deployment as secondary.
When I try to add the acs in USA to the deployment - Nothing really works.
The status shown in the primary is offline (red) and status pending. It stays like this for hours.
When I log in to the gui directly on the acs in USA, it still has status primary.
The two acs are transparently connected. There is WAN optimization (cisco waas) in between the two datacentres...
any hints or ideas are aprreciated.
thanks

Larsen,
Make sure we have these ports open. The ports in question for replication in ACS 5 use tcp:RMI (remote method invocation): ports 2020
and 2030.
Message Bus: 61616 for replication Sybase db (full) replication - while registering or applying full replication uses TCP: 2638.
Regards,
~JG
Do rate helpful posts!

Cannot see video in iMovie

This is my first time ever using iMovie so I'm hoping this is super easy. I'm using iMovie 11 in Lion. Ok so I imported an .mp4 video to iMovie and can play audio but I can't see any video. I just want to cut about 3 small clips from a big 20 minute video and put them together. I thought it would be simple, but how do I get the video to show up?

What to do if your computer won't recognize a FireWire device
http://docs.info.apple.com/article.html?artnum=88338
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
If your analog video device does not support device control, turn off device control. To do this, choose Preferences from the Edit menu, click the Device Control tab, then make sure the checkbox next to Enable Device Control doesn't have a checkmark in it.
Sue

E3000 cannot connect to wireless IP Camera

I am trying to connect 2 wireless IP cameras to my network with a Cisco E3000 router. One is a DLink DCS-920 and the other is Foscam FI8918W. I set up both cameras over ethernet and enter the router stettings. When I disconnect the eternet I do not get wireless connectivity. When I run Cisco Connect software / Computers and Other Devices / Other Wireless Devices, it does not find the cameras.
How do I connect to the cameras?
Thanks

After fiddling with various settings, I now can connect to the webcams locally through my browser. I cannot get the DLink DCS-920 to upload via FTP. The Foscam is not listed in the router's DHCP Client list, but I can see it in my browser.
Any thoughts?
My DLink webcam worked fine with a Netgear router.

After Working For 1 Year, Now Cannot See TC Wirelessly

I have a 2011 MBA 11” running OSX Lion (10.7.4). I also have a 2TB Time Capsule (also purchased in 2011) that I have “networked” into my Verizon Fios Network. What I mean by this, is that it is not hooked up directly, but rather I added the Time Capsule to the Verizon network wirelessly. In addition to this, I have an older Airport Express that I use to hook up some speakers wirelessly.
Everything had pretty much worked flawlessly for a year until early this week, when I could no longer connect to the Time Capsule. It just would not show up on my desktop. I can’t recall any updates either to the MBA or the Verizon router (any ideas how I could tell that?). I can hook up the Time Capsule to the MBA through the ethernet and all the data is there. Also, I when it it hooked up through ethernet, I can see it in Airport Utility. I see and error that Air Port Utility that says Time Capsule cannot extend the network.
I have read numerous postings here (all very helpful) and tried many of the suggestions, including just resetting everything (router, time capsule, etc.) but nothing works. Note, The MBA connects wirelessly to the router fine and also the Airport Express fine. No issues. I just cannot see Time Capsule wirelessly. When I connect it via the ethernet port (since I have an MBA I use the USB/Ethernet connector), then I can access Time Capsule.
Note, I do not think it is interference related, as the MBA can’t see the Capsule wirelessly from just a foot away. Could be wrong, but it seems odd that it all worked before, and I don’t think anything has changed.
Is there some sort of diagnostic where I could test the antenna of the Time Capsule? That is the only thing I can think is wrong at this point. Any other suggestions?
Thank in advance for the help!
John Mc
PS - I am color blind, I have no idea what the lights are.

I just wanted to add that it get renewed automatically after one year , in case you do not want to get it renewed for the next, do cancel it on the 12th month of the subscription.
Regards
Rajshree

Cannot see Airport Express when connected to Cisco corporate wireless - used to work, stopped cooperating recently

I have had an Airport Express at my office for several years to stream iTunes. It has worked fine, including through an upgrade to a new Cisco wireless network. Then it just stopped. I have reset, and then purchased a new AE with updated firmware. I have a green light, and when I connect via an ethernet cable I am getting all green lights, and can see that I have a valid IP address on the network, the router address is correct and the DNS servers appear to be correct. I still cannot see the AE on any Apple device connected to the wireless network....... any ideas? Is this connected to any recent IOS updates? Thanks for any insights......

Found similar (unsolved) issue in the thread below.
http://discussions.apple.com/thread.jspa?messageID=6514677&#6514677
Please reply to the above thread.
thanks

Cannot see Wireless IP Camera via WAN

Similar Messages

Maybe you are looking for