Cannot see WM stock

Hi
I have assigned a WM to a Sloc in the Ent. Struct and done all the related customizing.
Posted some unrestricted stock to the plant/sloc. But still in MMBE i cannot see any stock in the WM.
When I create a delivery in vl02n, i can see that the picking field is grayed out meaning the config for WM is correct,
I try to create the transfer order for the delivery so that the item can be picked.
I get the error
Storage location is assigned to lean WM
Message no. L3434
How do i resolve this problem?
Thanks

Hi,
You assigned to Lean warehouse the storage location in IMG.
Assign plant,storage locations to central warhouse. Then it will work.
Thanks

Similar Messages

Cannot able to see project stock in sloc

Hi Frnds,
i did po for project materials with acct assgnmt "p" and for a wbs element. I have received that materials with mov.type 101. but after completing goods receipt, if i go and check in mmbe..it is not showing any stocks..can anybody tell me the reason for this and where i can see project stock which i have received.
Regards,
Prasath

hi,
PO made with acct. asgn. "P" will be shown as consumed against WBS element. If you want to bring quantity to stock put acct. asgn. "Q" in PO. After GR, the quantity can be seen in MMBE against the WBS element.

Cannot see Condition tab in subcontract PO

Hi all,
I cannot see Condition tab in subcontract PO. As I know, Condition tab is not displayed in PO for consignment Stock or Free item. Why isn't it showed in subcontract PO?
Regards,
Duc.

SPRO - Material Management - Purchasing - Conditions - Define Price Determination Process - Define Schema Determination - Determine Calculation Schema for Standard Purchase Orders
Check whether the schema group vendor and purchasing has been assigned the Pricing Procedure.
Check whether the Vendor has been created for the Purchasing organization and assigned the schema group for the purchasing organization in the Vendor.

Want to see the stock of different variants with same configurable material

I have the stock for configurable material with different variants. Now I can see the cumulative stock
for that configurable material. But my requirement is that I want to see the stock for every variant
belonging to the configurable material.
How can I get it?

hello anant,
In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
I assume you are not taking about variant materials.
Reg
Samson.

Why is it that I cannot see my iMessages from my iPad on my iPhone?

Why is it that I cannot see my iMessages from my iPad on my iPhone? I have both on the iCloud, both have iMessage on, and on my iPhone I show to receive at both my cell phone number and my email address that is linked to my iPad. Any suggestions?

If its SD DV, check the following:
· Camera is set to the proper input
· In FCP, Canvas is set to RGB and sized to "Fit to Window or smaller
· View->External Video is set to "All Frames"
Do a search for Shane's Stock Answers ... I belive #8 covers this question.
-DH

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

I switched from an iPhone to a Galaxy s4. Everything seems ok except text messaging with people who have an iPhone. I can send them a text, they can see it, but I cannot see what they text back. What can I do please?

I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging. I can text, they can see it, but I cannot see their response if they are using an iPhone. Can you help me with this? What do I do please?

Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC
Please keep us posted, and let us know if this resolves your issue!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Cannot see table in sql developer or sql plus

I have created a record in application designer. I have then built the table. I can close the record and then find it again in application designer. But if I go to sql plus or sql developer, I cannot see it. Am I missing a step?

You probably can see all the tables of sysadm because someone else give you proper grant for that on existing sysadm's objects.
For the new or modified object (drop+create) you should :
1. connect as sysadm and run
grant select on new_table_name to your_own_user;2. connect with your own user and run
create synonym new_table_name for sysadm.new_table_name;Then you'll be able to query that table without using schema name alias.
Some admin have also a ddl trigger to make it automatically.
You could also work through a role and public synonym if more than one user needs to access sysadm's objects.
Nicolas.

I cannot see XMLType table in sql*plus

Hi,
Although I have wokred extensively with Oracle, I am new to Oracle XMLdb. My problem is I cannot see the XMLType tables created under my schema. I can see the tables when I do a select from user_xml_tables. But if I do a 'desc' or 'select from', I get ORA-04043 or ORA-00942. I can desc an XMLType table owned by xdb. I am using Oralce 10g. Please provide a solution asap as a customer is waiting on this.
Thanks,
Jayati Ray

Raghu !!
GREAT!!!
It was a BUG in Oracle sql developer, I installed the new version v3.0, It WORKS like a CHARM.
Thanks a million for your help!!!
Cheers
Tony

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#

I cannot see my Hotmail saved messages on my iPad 4. I do not have this problem on my iPad 2. All settings look identical.

I cannot see my Hotmail saved messages onmy iPad 4. I do not have this problem on my iPad 2. The settings appear identical.Any suggestions to cure the problem? Thank you.

My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
Kind regards,

On my Mac pro I cannot see my iTunes library in my slideshow as a music selection

I cannot see my iTunes library in iPhoto to add music to a slideshow

Hi Mary3400,
I'm not sure which version of iPhoto you are using, but see if the troubleshooting in this article helps.
iPhoto '11: Add music to a slideshow
The top section explains how to, the second section is for if you don't see your iTunes library as a source.
Best regards,
Nubz

HP Envy 4500 - cannot see from my IPAD 4 gen, does not airprint

Dear all,
I hope you can help me. I cannot see my printer envy4500 from my IPAD 4 gen (IOS7.0.4). I've tried all, following also your instruction (reterived in this forum)to set a manual IP but it does not solve the problem. My router is wireless Belkin Surf N300 and it's on line, the printer is also on line in the same wireless network as also the IPAD. Only if I use the direct wireless I can see the printer, otherwise not. If I use the AiO remote APP I cannot see the printer when it's connected to the wireless network, I can only see when I use direct wireless. If I enter the printer IP address from browser when I am connected to the wireless network, I can see all data from printer, I can see also my router typing it's address.
Can some one help me?
Thanks

Hi zagar,
Welcome to the HP Support Forums. I understand that your iPad is not finding the printer unless it is connect by Wireless Direct.
I have included a link to another thread here on the forum addressing a similar issue. As you read through the thread you will find several steps to try. Please let me know if none of the steps correct the issue.
HP Support Forums thread
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/airprint-from-iphone...
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Extract process up & running but I cannot see new transactions in the trail

extract process up & running on source but I cannot see new transactions in the extract trail file and as result it is not replicated to target
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING E_ENVA 00:00:00 00:00:10
GGSCI (HOST) 186> send extract e_Enva status
Sending STATUS request to EXTRACT E_ENVA ...
EXTRACT E_ENVA (PID 11824)
Current status: In recovery[1]: At EOF
Current read position:
Sequence #: 33
RBA: 34904432
Timestamp: 2011-09-21 11:14:47.000000
Current write position:
Sequence #: 6
RBA: 1008
Timestamp: 2011-09-21 11:26:42.426000
Extract Trail: C:\GG\dirdat\enva\ce
GGSCI (ILW177711) 193> stats extract e_enva
Sending STATS request to EXTRACT E_ENVA ...
No active extraction maps.
Where to look next and what is the root cause for this,
thank you

all configurations was ok and working fine (meaning data was extracted on source and replayed on target) before extract/replicat processes restart
I did not touch any of the configuration files, after restart processes shows as up & running without any actual errors or rejects on the logs
please find extract configuration file:
EXTRACT e_enva
SETENV ( ORACLE_SID=orcl )
USERID USER_SCHEMA_A, PASSWORD AACAAAAAAAAAAAHAOFVCXAUANCVHIHCE, ENCRYPTKEY DEFAULT
DISCARDFILE C:\GG\dirrpt\e_enva.dsc, APPEND, MEGABYTES 10
REPORTCOUNT EVERY 10000 RECORDS, RATE
NOTRACETABLE
EXTTRAIL C:\GG\dirdat\enva\ce
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('START', null, 'ALL','e_enva')";
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('STOP', null, 'ALL','e_enva')" ONEXIT;
TABLE USER_SCHEMA_A.T_TABLE, KEYCOLS (ID_OBJECT);
TABLE USER_SCHEMA_A.T_TABLE_REF, KEYCOLS (ID_XREF, PKEY_SRC, SYSTEM, IND);
logging and supplemental logging enabled, commits performed and again nothing was changed in configuration except that processes was restarted
thank you

Cannot see WM stock

Similar Messages

Maybe you are looking for