Cannot seem to access device remotely

Hope someone could help
I have a temperature sensor device connected to my router and want to be able to monitor it remotely over IP.
It works fine on the LAN side but I cannot access anything on the WANT side.
I set up the port forwarding table but it seems I am not even seeing the router ??
I running Internet cable through time warner as the ISP with a WRT160N router..It has to be a simple setting or something I anm missing>
Any ideas?
Mike

Open the setup page of the router. Click on Administration tab and disable UPnP. Save the settings.
Go to Setup tab and change the MTU size to 1365. Save the settings.
Go to Security tab and uncheck the box ' Filter Anonymous Internet request'. Save the settings.
Power cycle the router and try to access the device on the Internet.
Make sure that firmware on your router is updated.

Similar Messages

HT201272 I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.

I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.

I have exactly the same trouble.
If you wet the answer, please let me know!!

EA4500 Unable to Access Devices Remotely

I hope someone can help.   I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices.   I have done the port forward.   I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses.   When I go off the local connection -   Access does not work.     Slingbox did its auto configuration and I can access it.   I just cant get to camera devices (Panosonic, Foscam, etc.).
What could be wrong?    Please help.   Thanks

rparker4u2 wrote:
One is fixed, two others are dynamic.   The ports are forwarded to the assigned ports of the devices (8050, 5080, and 8005) It works from an external IP 99. address with ports specified http://99.xx.xx.xx: 8050 and it gets redirected when I'm on the local LAN.   It fails when I access from my cell phone or another internet provider.   Thanks
Just make sure to assign a fix IP address to the cameras. You can use the DHCP reservation feature of the router to assign these cameras a specific IP. This is working with the old router? Right?

Trouble accessing devices remotely.

I have a Linksys E1200 router.
My problem is I have installed a camera system that allows remote viewing.
I cannot access the system through the E1200 I am not very knowledgeable in net working.
What do I need to do to access the DVR from a remote computer?

You have to enable a port number for the camera to be viewable over the internet or remotely. The first thing that you have to check though is the internet connection type that the router is getting from your internet provider. You would need a public ip address from your ISP in order for this setup to work. If you are already on a Cable internet service then it is okay because they usually have public ip addresses. If you are on DSL internet connection, make sure that your modem is set to full bridge. If that is all set then you can proceed to the next step of enabling port range forwarding on the router's setup screen for the dvr or the camera. Contact tech support for your DVR system to obtain the correct port number that will be opened on the router. And with that, the DVR should be assigned with a specific ip address so that say if you are on a remote location you can access the camera this way: http://publicwaniportnumberofcamera. You can refer to the links below for further instructions.
Setting up port range forwarding on Linksys wireless-N routers and gateways
Setting up single Port Forwarding on a Linksys wireless-N router

Macbook Pro can connect to Belkin N1 wireless, and says ISP and everything is fine, but I cannot seem to access the internet?

Hey everyone, I've been experiencing this problem for a very long time, my Macbook Pro has a lot of trouble connecting to my Belkin N1 wireless, however, when I sit far away from the router I seem to be able to connect and use the internet, though I have a lot of 'System Timeout' and have to reboot my wireless. After we moved houses, my room is extremely near the wireless, and before the Belkin was formatted with a password, I was able to use the internet without a problem. However, now I can connect to the wireless, and Network Diagnostics tells me that everything is good to go, however, I just can't seem to use the internet. No pages will load, I've tried everything changing proxies, looking through my security certificates and tried using IP addresses instea of website names and nothing seems to work.
I've gone to the store and have always been dismissed, with the excuse that Belkin is just not compatible my Macbook. I'm not technologically savvy, but I can follow instructions.
Thank you in advance!

Hello blinchikis. Welcome to the Apple Discussions!
Which Belkin model do you have? Are you running wireless encyption, WEP or WPA? If so, if you temporarily disable encryption, can you connect your iBook to the Internet now? How about if you connect your iBook, directly using an Ethernet cable?

I cannot seem to access itunes I just downloaded and rec'd an error message this pkg could not be opened?

I've tried to download iTunes 2x on new Acer - Aspire Series. I get an error message that says, "This installation pkg could not be opened. Verify that the pkg exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer pkg."
What now??? Laptop will not be as beneficial without access to iTunes???

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

I entered data for an address book I called: Wine Stompers and cannot seem to access it.

I have seen the name "Wine Stompers" fly by on the screen, but am unable to find the book. Can you Help, Please

Hi fco43051,
Where did you enter the data? Was is a download? Or was it an addon? With more information we can better assist you, thank you!

I can't seem to access new mail on my I pad . I can only see strings of messages that are related to each other. I also have lost the ability to search for messages that are no longer on display on my I pad.

I cannot seem to access properly any more the new e mail messages on my I pad. I can only see strings of messages that relate to each other.
Also I cannot search for old messages that have now disappeared . The search bar has disappeared.
Tom

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

I have subscribed to Adobe Acrobat XI but the trial version keeps popping up and I can't seem to access the program I am paying for!

I trialed the Adobe XI and signed up for the subscription. I thought I had downloaded it but I cannot seem to access it. The trial version keeps blocking me.

close acrobat > sign out and then back in to your cc desktop app.> open acrobat.

I have lost one of my devices (ipad2) and i cannot seem to find it on my findmyiphone app. all other devices show up except for this one. is there something i can do?

i cannot seem to actively see/locate my ipad2 on my findmyiphone app. is there a way i can find it using the serial # of my device

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening?

Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening? Is there anything I can do to get them back? I'm freaked out by the thought that I am paying for what I thought was a safe place for my photos to be stored and accessed later but now see that there are nearly 500 pictures/videos gone from my photostream folder. Any help would be greatly appreciated. Thank you. - Michael

Hi newmarket,
Photo Stream is not a respository for archiving photos. It is a cloud storage device that will store the last month or last 1000 photos taken by any device on the same Apple ID, and then will "share" those photos with all other devices that have Photo Stream turned on,and that are logged onto the same Apple ID.
iCloud backups will contain all of the photos that were on your camera roll the last time you backed up your device.
If you have photos outside of the Photo Stream parameters, and they are not all on your current camera roll, then you have no way to retrieve them unless you have imported them to the computer you sync with or have uploaded them to some other cloud service like DropBox.
Sorry,
GB

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF file

I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?

Apple never bopthered to explain that this would happen
Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
, so I could easily have lost ALL of the files I kept on iDisk.
No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
Apple has made no effort to suggest remedies for the problem it has given iDisk users
They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice.

Deskjet3915 cannot access device service

I just downloaded the new software and driver for the deskjet3915. Everything appeared to run normally. I cannot access device services. I get an error "The application could not be started. Try reinstalling this printer driver. I redownloaded the driver and reran it. Still get the same error. I am running Windows XP with all microsoft updates. Does anyone have a possible fix?

the Curve does not allow you to access to the Device Memory using Windows Explorer and "USB Mass Storage" Mode. You can only access the memory card (aka Media Memory).
to access the Device Memory, you have to use the Media Manager. You need to download the "Desktop Manager + Media Manager" for that.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Cannot seem to access device remotely

Similar Messages

Maybe you are looking for