Cannot select line in for recording

I am trying to use Adobe Audition on windows xp media center edition (because their too stupid to make it for mac) through boot camp. i installed all the drivers and can record using the built in mic, but there is no way to select the line in.
lets get the obvious out of the way
i tried selecting different input in audio properties. there is only one choice and this is "cirrus hd audior" or something like that
i tried plugging in a mic to see if that would override the built in mic and it didnt
if anyone has any idea how to fix this it would be greatly appreciated

any ideas??

Similar Messages

Cannot select ok button for icloud backup popup stating "This ipad hasn't backed up in 8 weeks."

I cannot select ok button for icloud backup popup stating "This ipad hasn't backed up in 8 weeks. Backups happen when this ipad is plugged in, locked and connected to Wi-Fi"

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. You won't lose any data by doing this.

How to select line items in recording(BDC)

Hi All,
we are trying to Recording QP02 transaction ,we have inputs like material,plant,Group,Group Counter.
after entering these inputs we will get multiful line items(inspection characteristics).we need to check one field for each item.
How can we get this?
Please help me?
Thanks,
Peddi reddy.

Hi Kamesh,
Thanks.
After selecting line items i am selecting control indicators Tab.
then Pop up screen called as (Edit characteristic control indicators) will open ,..then just pressing enter..the it will show another pop up ..here i am selecting one field(Long term Inspection)..the process has to do for all line items.
In My program i have copied BDC performs which i got from Recording.
Do i need to change tha performs or will it work?
i tested in foreground with another material .... upto 3 or 4 line items its working fine.after that sytem does.t say anything.
if i need to chage performs please help me .

You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

Cannot select iTunes videos for sync with Sony Bridge for Mac version 3.6

Hi,
I have a Sony xperia T.
I am running Sony Bridge for Mac version 3.6 (the latest I think)
I would like to sync a couple of movies to my phone so I can take them with me when travelling, but the itunes library movies are "greyed out" and I cannot select them to enable them to sync.
I cannot see why.
Also some of my music is the same - some albums are "greyed out" and cannot be selected.
Anyone else seen this and worled out the solution ?
if so - please advise !
Hewey

They are probably DRM protected, if so, you wont be able to transfer them
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Cannot select search suggestions for Google search

Firefox 4- Cannot select any item to search in Google from search history drop dwon box, must enter new search every time

Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

My new macbook air does not recognize my line in for recording. Please advise

I plug into a soundboard from a church and record with a line in on my macbook - or at least I did. My old one recognized the line in under sounds but this new one doesn't seem to acknowledge??? Help

Hi Brad Mason,
Welcome to the Apple Support Communities!
I am glad that your MacBook Air can connect to the internet using your Time Capsule but I can understand the frustration of not being able to print or back up using Time Machine either. For setting up your printer, I would suggest working through the first attached article.
Mac Basics: Printing in OS X - Apple Support
For making sure that your computer is set up and backing up to Time Machine correctly, I suggest reading over and working through the next attached article.
Mac Basics: Time Machine backs up your Mac - Apple Support
If after verifying that your computer is set up with your printer and Time Capsule correctly you are still having issues, please let me know what errors you receive or what happens when you attempt to print or back up your computer.
Cheers,
Joe

Cannot select Wiki server for Group in 10.5.8 WGM

I have a server with a number of wikis that were created under the server's main site, i.e. apache virtual host (i.e.: fqdn of the server).
In addition, I had one wiki that was created under a second site (virtualhost) in order to hide it from the publicly accessible list of available wikis under 10.5.x (http://server.domain.com/groups/).
This wiki does still exist - the folder and wiki pages are all there under /Library/Collaboration/Groups/ but it won't show up under its own site or the main site.
In addition, when I select a site as the collaboration server for a particular group inside WorkGroupManager, my selection doesn't stick - the servername is greyed out. However working wiki groups will continue to work, but I cannot re-bind that single wiki group to its site.
I know there are some changes in 10.5.8, probably in transition to 10.6 server, regarding the usage of the ServiceLocactor LDAP group attribute. I don't think I have seen a similar problem in OSXS 10.5.7 or earlier. Has anyone else run into this?

After more oddities, I believe to have it fixed.
Deleting and re-creating the Sites in ServerAdmin did make the hosted sites selectable as wiki servers, however the choice didn't stick.
The system log gave me this at every save operation in the Web Services Module in ServerAdmin:
<pre>servermgr_web: Failure saving group services update</pre>
I believe the Global UID of the webservices in the server's apple-serviceinfo LDAP attribute was never updated from a move of the server to newer hardware and an OD merge operation.
I am not sure which of my actions lead to success and I am not free to experiment, but here is what I did:
Upgraded apache from v.1.3 to v.2.2 in the WebServices Module
Located the apple-serviceinfo attribute for the $FQDN using Inspector in WorkGroupManager
located a custom port assignment (8008 for an old virtualhost) and changed it to 80
deleted all virtualhosts in ServerAdmin
recreated all virtualhosts in ServerAdmin using FQDN in servername and description
enabled Collaboration Services on all virtualhosts
Re-enabled the new virtualhosts as wikiservers for their respective groups
The auto-created GUID (global identifier) of the server is:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63</pre>
The auto-created GUID (global identifier) in the server's serviceinfo entry (part of section for virtualhost shown) is now:
<pre>
<key>9EC33DDF-FDEG-4444-8090-B8B559EE2042</key>
<dict>
<key>hostDescription</key>
<string>server.domain.net</string>
<key>hostDetails</key>
</pre>
This corresponds exactly to one ServicesLocator entry of that group:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63:9EC33DDF-FDEG-4444-8090-B8B559EE2042:w iki
ServerGUID:VirtualhostGUID:servicename</pre>

Cannot select Get Info for multiple tracks

I just updated to Lion 10.7.3 and iTunes 10.6.1 and imported my Leopard iTunes Library. I can Get Info on individual tracks but when I shift select or command select multiple tracks the iTunes window turns gray and nothing can be selected. iTunes just freezes until I press the Escape key. So far, everything else works as expected - the only problem is selecting multiple tracks (which worked fine for me on previous OS and iTunes versions).
I haven't found any reports of similar problems so maybe I'm doing it wrong.
Any suggestions?

I solved my own problem - the last time I used iTunes was on a two monitor system. I still have the second monitor connected but it was turned off and the iTunes Get Info window for MULTIPLE selected items was opening on the second monitor. When I did a Get Info on a single selection, the window appeared on the main monitor normally - behavior which never made me think that multiple items would show up in a different window on the turned off monitor.

Cannot select Airplay Device for Output Audio

I can't select my chosen AirPlay device for Output Device. It shows up as one of the options in the Sound System Preference, the Sound Selector in the Menu Bar or the AirPlay selector in iTunes (version 11.0.1). But, when I select it, it automatically re-selects the built-in speakers. Rebooting is the only way to restore this functionality. Even then, it seems to work for a time, then quits working. This problem has been reported elsewhere with no resolution that I'm aware of. Any ideas?

Every get an answer to this?

Cannot select base station for iBookG4

I have tried to trouble shoot this for more than an hour and cannot do this simple step to get started on setting up Airport Extreme for the first time. Any suggestions for this luddite. Thank you.

I've checked the Airport Help notes for the 5th time re fixing the Airport Utility. The instructions don't match the options I actually have but I'm going to try one more thing. This means I need to disconnect from the Internet, so I will check for responses later. Hopefully, I will not mess up my existing DSL setting and be unable even to check back here. Thank you anyone.

Cannot select Digital output for ZS 2 Noteb

Hi, I just got an Audigy 2 ZS Notebook card today, installed it, seems to work, but I also got these 5. headphones... The headphones can be plugged in either from the 3 Analog outputs from the card's docking station, or a single /8" cord, which I assume would be digital. I tried using the 3 analog outs, but when I tried to calibrate the 'speakers', front and rear sound exactly the same (front left and rear left sound as if they are in the same position, same with right), so I tried using the single /8" cable plugging it into the card's digital out, and it sounds much clearer, but nothing plays when it tries to play from the center channel or rear channels, and "Digital Output" is shaded so it cannot be selected from the THX Setup Console...
If it helps, I have the Kinyo KY-00 headphones, and they have their own small amp, which may be causing the hissing sound.
Any help is greatly appreciated.

guh. I'm retarded. Somebody delete this topic

Cannot select proper domain for group services

Hello-
I have a working LDAP/Mail/WWW setup with all OS X servers. I'm trying to setup group services (mailing lists in particular) on our domain. I have created a group, when when I go to the "Enable the following services for this group on" dropdown, I don't see the domain I'm looking for. I see all kinds of other ones (about 50) that we do web hosting for.
Anyone know why I can't see my domain?

After more oddities, I believe to have it fixed.
Deleting and re-creating the Sites in ServerAdmin did make the hosted sites selectable as wiki servers, however the choice didn't stick.
The system log gave me this at every save operation in the Web Services Module in ServerAdmin:
<pre>servermgr_web: Failure saving group services update</pre>
I believe the Global UID of the webservices in the server's apple-serviceinfo LDAP attribute was never updated from a move of the server to newer hardware and an OD merge operation.
I am not sure which of my actions lead to success and I am not free to experiment, but here is what I did:
Upgraded apache from v.1.3 to v.2.2 in the WebServices Module
Located the apple-serviceinfo attribute for the $FQDN using Inspector in WorkGroupManager
located a custom port assignment (8008 for an old virtualhost) and changed it to 80
deleted all virtualhosts in ServerAdmin
recreated all virtualhosts in ServerAdmin using FQDN in servername and description
enabled Collaboration Services on all virtualhosts
Re-enabled the new virtualhosts as wikiservers for their respective groups
The auto-created GUID (global identifier) of the server is:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63</pre>
The auto-created GUID (global identifier) in the server's serviceinfo entry (part of section for virtualhost shown) is now:
<pre>
<key>9EC33DDF-FDEG-4444-8090-B8B559EE2042</key>
<dict>
<key>hostDescription</key>
<string>server.domain.net</string>
<key>hostDetails</key>
</pre>
This corresponds exactly to one ServicesLocator entry of that group:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63:9EC33DDF-FDEG-4444-8090-B8B559EE2042:w iki
ServerGUID:VirtualhostGUID:servicename</pre>

After ios7 upgrade, I cannot select different ringtone for different phone #

I had set up different ringtones for specific phone numbers but after ios7 upgrade, all the phone numbers ring with the default ringtone. The ringtones are still individually assigned correctly when I look in the addresses book. I have even tried changing an assigned ring tone to something else & heard the new ring tone when it was selected, but when the number was called, I just got the default ringtone.
Any ideas or solutions?

Hello ccrjon,
Thank you for providing so much detail about the issue you are experiencing with Messages after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the Messages app, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

Image Sequence...Cannot select multiple files for image sequence.

When I select Image Sequence in QT7 and navigate to the folder with the images, I am no longer able to select more then one image. Is the something that 10.6 has broken?
What am I missing?

If you only get the first file to import then I suspect the image files are not all sized correctly or the file names are not being recognized as "sequential".
I've done some tests to confirm this on my machine. File names with some using a _ (underscore) and others using a - (hyphen) import only the highlighted file. In another test I mixed in a single file sized just one pixel wider than all of the others and only the first file is recognized.

Cannot select line in for recording

Similar Messages

Maybe you are looking for