Cannot select multiple airplay options

I itunes I can see and send audio to any individual airplay option ( I have 3 including the imac) , however when I choose to send to multiple, I only get the option of one airplay device & my computer, the other airplay device does not appear in the list to tick for multiple airplay devices.
I can see and play to them all using airfoil though, so I am stumped.
Any ideas guys?
i have rebooted to no avail.
J

I don't know if you resolved this yet... but I had the same problem. Eventually I realized that you have to TAB - SPACE BAR on the quiz slides. With the drop downs for filling in the blanks, it is TAB to, SPACE BAR, UP DOWN ARROW KEYS, ENTER. I am having to put instructions on the slide. Also, I'm having a nightmare with the tabbing on quiz slides, because for some reason it tabs on EVERYTHING on the slide, not just the interactive options. It even tabs the slide itself. I can't fix it... I've tried everything. I have it all perfect on everything but the quiz slides, then it loses focus. Also, for the fill in the blank quiz slides, it tabs to the selections all over the place. First it goes to question 1, then 6 then 3, then 2... and so on. As these don't show up in the tabable order feature, I can't fix that either.
Sorry I just probably made it worse for you... but if you know of a fix for these other tabbing issues with quiz slides, please let me know.

Similar Messages

Keyboard accessibility, Captivate 8 - I cannot select multiple choice options with tab / enter.

It seems that most information I can find is that it's a standard feature, and if you have the accessibility checkbox selected then it should work. I'm viewing my quiz in HTML5 Chrome. Tabs do not enter the answers, am I missing something obvious?

I don't know if you resolved this yet... but I had the same problem. Eventually I realized that you have to TAB - SPACE BAR on the quiz slides. With the drop downs for filling in the blanks, it is TAB to, SPACE BAR, UP DOWN ARROW KEYS, ENTER. I am having to put instructions on the slide. Also, I'm having a nightmare with the tabbing on quiz slides, because for some reason it tabs on EVERYTHING on the slide, not just the interactive options. It even tabs the slide itself. I can't fix it... I've tried everything. I have it all perfect on everything but the quiz slides, then it loses focus. Also, for the fill in the blank quiz slides, it tabs to the selections all over the place. First it goes to question 1, then 6 then 3, then 2... and so on. As these don't show up in the tabable order feature, I can't fix that either.
Sorry I just probably made it worse for you... but if you know of a fix for these other tabbing issues with quiz slides, please let me know.

Cannot select multiple speakers ( airport express)

cannot select multiple speakers in itunes ( have two airport expresses) ... tries to connect and then always times out.

Only firewall I have is what is standard on my mac, and if that is what your talking about, I do not know how you do that UDP traffic thing.

SAPGUI JAVA 7.10 (OSX 10.5.1): cannot select multiple columns in ALV

Hi,
in sapgui java 7.10 (on mac osx 10.5.1) I cannot select multiple columns in ALV reports.
I can do it only in some transactions (like SE16). But on all our custom reports (REUSE_ALV_GRID_DISPLAY) in does not work.
Any hint?
Many thanks,
Lorenzo

Hi Lorenzo,
did you double check if selecting multiple columns works with SAP GUI for Windows in the same report?
If yes, I suggest to file a bug report so we can do a remote logon to run your custom report.
If not it might be because of REUSE_ALV_GRID_DISPLAY itself or your parameters calling REUSE_ALV_GRID_DISPLAY.
Best regards
Rolf-Martin

TS3899 Just updated to 7.0.6. Cannot Select multiple emails to move/delete.

Just updated to 7.06. Cannot Select multiple emails to move/delete. I select Edit in any mailbox, trash or sent, then select one email to delete/move, after a few seconds, the email automatically 'unselects' the move and delete buttons deactivate, but the top status bar still has '1 selected'.
If i try to select multiple emails I get to the 3rd or 4th one and then they all auto unselect.
My Ipad without the update works fine. My daughters iphone 5 has the same issue and she just updated.

I have no problem selecting multiple emails on iOS 7.0.6
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

I cannot select multiple objects.

I cannot select multiple objects within the file I'm currently working on. This has worked in the past. Have I inadvertently changed a setting?

Are you trying to select via Shift+click? If yes, try selecting items in Layers Panel and from the fly-out menu, choose Select items and see if it works.
Regards,
Pooja

Selecting Multiple AirPlay devices for output

Can I select multiple airplay devices to stream music to from my iPad? It seems that I'm limited to just one airplay item which is too limiting...
TIA,
David

The ipad only allows one airplay connection at a time, Itunes on a computer allows multiple.

Cannot select multiple images in iPhoto '08?

What am I doing wrong? I want to select multiple images to either print several on a page, or publish to a gallery, but for the life of me I cannot find a view which shows me all photo thumbnails or all thumbnails in an album or all in an event. I can spin the mousewheel to singly go through them, or I can hit edit and go to full screen where I get a thumbnail bar and can select multiples and view them at the same time, but printing or publishing this selection only recognizes the first photo as selected. If I try to select View>Thumbnails, the subsequent menu options are grayed out, and the top one is "hide" even though I see no thumbnail bar. Is there something very obvious I'm missing, or has something gone awry and I should reinstall?
<Edited by Host>
Any one can help them?
Thanks

There's a slider down right of the iPhoto Window - drag it left.
Regards
TD

Switched from Samsung Note 2 to iphone 6. Faced Difficulties while sending message. [1]Multiple Selection of receipients is not available. Eg. If I click plus, it shows me all the contacts but i cannot select multiple contacts using checkbox

Phone : IPhone 6
OS : 8.1
Problem Statement : Multiple Selection of Recipients while drafting New Message in SMS.
Expected Solution : Checkbox should have been provided to select multiple contacts using one screen

Thanks for the reply.. I also tried that way.. I face couple of issues
1) I could not find an option of saving a Draft Message
2) After multiple recipients(I have selected 12 recipients) in "TO" section, if I type a word in "TO" such as "Pre", it shows me all the contacts containing "Pre" but I cannot select the last contact incase there are more than 20 contacts coz I am unable to scroll down till the end.. If I do so.. I cannot select coz screen scrolls up automatically..
Pls try ... If required I will insert video

Cannot select multiple airports using remote app.

Why can't I select multiple airport express units using the remote app?

Thanks for the reply.. I also tried that way.. I face couple of issues
1) I could not find an option of saving a Draft Message
2) After multiple recipients(I have selected 12 recipients) in "TO" section, if I type a word in "TO" such as "Pre", it shows me all the contacts containing "Pre" but I cannot select the last contact incase there are more than 20 contacts coz I am unable to scroll down till the end.. If I do so.. I cannot select coz screen scrolls up automatically..
Pls try ... If required I will insert video

Cannot select multiple messages in a sequence diagram

In sequence diagrams, deleting multiple messages is tedious because multiple messages cannot be selected by using a selection rectangle.
1) If the rectangle contains a single message, its object is also highlighted. So when multiple messages are selected, the corresponding objects are selected.
2) If the selection rectangle overlaps a single line of the combined fragments box, the entire box is selected.
I could same time if Studio used normal CTRL conventions. In other applications, holding down CTRL has two possible results.
1) If the item to be selected is not highlighted, then that item becomes highlighted and is added to the selection group. Studio does this.
2) If the item to be selected is already highlighted, then that item becomes non-highlighted and is removed from the selection group. Studio does not do this. So I cannot use a selection rectangle, then selectively use CTRL to remove unwanted items from the selection.
Can anyone suggest a way of selecting multiple messages?
As a side issue, does anyone know how to remove individual items from a selection?

TreySpiva wrote:
Have you tried using the Shift key when selecting?It's the same problem. Selecting one or more messages also highlights the sending and receiving objects associated with the messages. Pressing DELETE at this point would also delete the objects.

With a wired keyboard and a 2014 iMac I cannot select multiple items which are not next to each other

I have recently changed from Windows 7 desktop to a new iMac running Mavericks. I have chosen a wired keyboard as I like the usual Delete key function.
I cannot find out how to select several items which are not next to each other (e.g. words in Pages). The well known method in Windows, which is repeated in the the Apple Finder Help screen, does not work. Would be grateful for advice

Hi JBowfin,
If I am understanding your question correctly, I believe that I have an article that will address this question for you:
Mac OS X 10.0: Use Command Key to Select Multiple Items in List and Column Views
http://support.apple.com/kb/TA20396
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Logic Pro X - Cannot see multiple input options

Hello,
I've been using other DAWs(DP and Studio One 2) but I decided to try Logic Pro X and purchased it yesterday.
I'm using a firewire audio interface which has multiple input options. For example, Ch1 and Ch2 are for mic inputs, ch3 and ch4 are for my external sound module (Yamaha Motif Rack), etc.
I tried to play and record the sound module on Logic, I first added "New External Midi Track". Then, I added "New Audio Track" to record the sound of sound module, like I do on other DAWs. I tried to select the ch 3-4 as an input for the audio track, however I could only see the input ch1-2 as an option for the track.
The audio interface's driver is installed correctly. In fact, I can use the input ch 3-4 with no problem on other DAWs.
Since I'm new to Logic Pro, I might have overlooked how to assign / setup the inputs.
Can anybody let me know how I can activate input ch3-4 on Logic Pro X?
Thanks in advance.
-Holly

Yeah, after I wrote the post, I found out that this happened because "built-in input" was chosen as a default input source on "Preferences -> Audio". That's why it only showed ch1-2. Now I chose my audio interface as the default input and I could see other channels.
That's good, however this brought up a new question, if I want to use multiple input options such as two audio interfaces or combination of built-in input and an audio interface, is it possible to do so?

Cannot select multiple thumbnails in Pages Navigation Panel in 9.4.5

I've installed the latest Acrobat Pro version for Mac, 9.4.5, on both my iMac and MacBook Pro. In both cases, I no longer can select multiple thumbnails of pages in the Navigation Panel's Pages panel. Anyone know a fix for this?

Hi, this is a one-time verification request from Bob Staples. Sorry for this extra step asking you to verify you are a living, breathing human. I recently experienced an substantial increase in spam, which has driven me to increase my spam screening software. This one-time verification message is a part of it.
To complete this verification, please click 'Reply' and leave the subject line intact (very important).
If you did not send me an email, my apologies; just delete this.
Sincerely,
Bob Staples

Cannot select multiple text items simultaneously

Since upgrading to the latest Pages, I can no longer select multiple letters/words by holding down command. I used to use this to edit multiple things (titles, for example) all at once (make bold, underlined, italicized, larger font, coloured, etc.). Now, however, I have to select each letter/word one at a time and edit them individually.
Is this just a bug or is there a new way of selecting multiple text characters simultaneously for editing?
Thanks!

There is no fix by any means.
Switching from Word to Pages v5 (any release) is like giving up oxygen for a vacuum. The time that you will expend searching for feature/functionality omissions in Pages v5 that you had in MS Word will just suck the life out of you.

Cannot select multiple airplay options

Similar Messages

Maybe you are looking for