Cannot select multiple images in iPhoto '08?

What am I doing wrong? I want to select multiple images to either print several on a page, or publish to a gallery, but for the life of me I cannot find a view which shows me all photo thumbnails or all thumbnails in an album or all in an event. I can spin the mousewheel to singly go through them, or I can hit edit and go to full screen where I get a thumbnail bar and can select multiples and view them at the same time, but printing or publishing this selection only recognizes the first photo as selected. If I try to select View>Thumbnails, the subsequent menu options are grayed out, and the top one is "hide" even though I see no thumbnail bar. Is there something very obvious I'm missing, or has something gone awry and I should reinstall?
<Edited by Host>
Any one can help them?
Thanks

There's a slider down right of the iPhoto Window - drag it left.
Regards
TD

Similar Messages

Cannot select multiple images

I click on the first image, and then hold the shift key and click on a second image, but it only selects the second image. This used to work!

Here's the keyboard issue. It was my error. Nothing wrong with the
program or computer.
I use mouse without borders. That let's me use one keyboard and mouse
between multiple computers. My main keyboard was pointing to my work
computer. The Wacom tablet was being used to select the images on my
Lightroom computer. I should have been using the keyboard on my Lightroom
computer. That's why holding down the shift key on the work computer was
not allowing me to select images on the Lightroom computer.
Like I said before. Total user error.
Alton

Cannot stamp multiple images anymore

running v 3.2.1 and I cannot stamp multiple images any more. I can lift and stamp one at a time but when I select to end and attempt to stamp it only stamps the last image in the batch. any help is appreciated!
Thanks Dave

Hello Dave,
Check if you have "Primary only" activated.
That looks like a case of "Primary only".
If you have set the "Primary only"-flag, any changes only apply to one image of the selection.
Uncheck the button with the "1" in a square above the film strip.
You can also deselect this option from the "Edit" menu.
Regards
Léonie

Selecting Multiple Images to Copy - Fragmented Image

Hello!
I made a pdf out of a powerpoint presentation on a friend's windows computer. I am now trying to extract an image that I lost while editing on my computer. The problem I have run into is that the image was fragmented into multiple pieces in the PDF (1 image is now 3 parts). I cannot seem to select all of the images and do "copy images" as you can with one part.
I can select all the pieces with the touchup object tool and edit them in illustrator and then manipulate them but this is very much the long way around.
Since I have to do this with many graphics, I am trying not to take the long route. Is there a way to select multiple images and copy them? Or is there a way to select everything with the touchup object tool and just copy it to the clipboard?
Any thoughts?
-Mike

I am also running into this issue. I happens in PDFs coming from all programs that our clients use to produce the PDFs. InDesign, Publisher, Word, WordPerfect.
My question is: back in CS3 days, I could select all the images (one image that broke into any number of horizontal sections) with the TouchUp tool and select>edit objects...They would all open as one image in photoshop, I could do my edits, save and then replace what I had on the PDF with the new saved file (jpg or pdf or tiff).
We upgraded to CS5 and now I can't do that anymore. I go into my PDF, select all parts of the image and then edit, but only the first part I selected is editable. I would like to say that it's a CS5 issue, but we had one machine, back when we all had CS3, that would do the same (not edit all the parts as one). I'm thinking it's some sort of preference or combination of preferences in both Acrobat and Photoshop, but I can't figure it out.
I know one runaround is the "Snapshot Tool," but it was much better before when we could edit what we needed and that's it.
Thank you for your attention,
Leonardo Pedreros
P.S.: Please don't judge me about Illustrator VS. Photoshop...they REFUSE to give us Illustrator at work, for some reason ($$$). If only they knew the amount of time and file size that Illustrator saves, they'd invest in 5 measly licenses.

Cannot select multiple speakers ( airport express)

cannot select multiple speakers in itunes ( have two airport expresses) ... tries to connect and then always times out.

Only firewall I have is what is standard on my mac, and if that is what your talking about, I do not know how you do that UDP traffic thing.

SAPGUI JAVA 7.10 (OSX 10.5.1): cannot select multiple columns in ALV

Hi,
in sapgui java 7.10 (on mac osx 10.5.1) I cannot select multiple columns in ALV reports.
I can do it only in some transactions (like SE16). But on all our custom reports (REUSE_ALV_GRID_DISPLAY) in does not work.
Any hint?
Many thanks,
Lorenzo

Hi Lorenzo,
did you double check if selecting multiple columns works with SAP GUI for Windows in the same report?
If yes, I suggest to file a bug report so we can do a remote logon to run your custom report.
If not it might be because of REUSE_ALV_GRID_DISPLAY itself or your parameters calling REUSE_ALV_GRID_DISPLAY.
Best regards
Rolf-Martin

Cannot move some images in iPhoto to desktop

I cannot move an image from iPhoto to my desktop. Also, when I click on the image in iPhoto to enlarge it, I get an exclamation point. When the image is small size in iphoto, I can see it. But if I click on it to enlarge it in iphoto, I get the exclamation point. Don't know why this is happening? I have Iphoto 09, version 8.1.2 (424) My goal: Be able to move any image in iphoto to my desktop and not get the exclamation point anymore.
Message was edited by: rjduffy61

The ! turns up when iPhoto loses the link to the original image - and that's why you can move it to the desktop.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Selecting multiple images to edit the source code

Hi. Does anyone know if there's a way to select multiple
images in a table and change there source code. The reason why I
ask is that I recently decided to organize my assets folder by
adding subfolders. Naturally, this makes my images appear as broken
links. It's a pretty big site that I'm working on and I would like
to know if there is a faster way than just selecting them one by
one.

If you would have created the folders within DW itself (file
management), and moved images from one
folder to the other, the links would have been adjusted
automatically. Carrying out changes like
this outside of DW will create broken links as you have
found.
Did you backup the original site, if so, and have a lot of
broken links, it maybe worthwhile, going
back to the original and use the file management to
rename/create new folders and move your assets
that way.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
CSS Tutorials for Dreamweaver |
http://www.adobe.com/devnet/dreamweaver/css.html
"lordcornwallis" <[email protected]> wrote
in message
news:gpqni2$3io$[email protected]..
> Hi. Does anyone know if there's a way to select multiple
images in a table and
> change there source code. The reason why I ask is that I
recently decided to
> organize my assets folder by adding subfolders.
Naturally, this makes my
> images appear as broken links. It's a pretty big site
that I'm working on and
> I would like to know if there is a faster way than just
selecting them one by
> one.
>

Selecting multiple images in a table

Hi. I have a website and have recently decided to organize my
assets folder by creating subfolders. However, this has made all of
the pictures on my site turn into broken source codes. Is there a
way to select multiple images within a table and edit the source
code? If anyone can help me I'd greatly appreciate it!

You should always do this kind of thing using DW's Files
panel - DW will manage your links when you do.
Did you move all of the images into the same subfolder, or
different ones? If the latter, you will just have to remake all of
the links one by one. If the former you may be able to do
find/replace to find the old links and replace with the new folder
path.

LR 2.2 on OS X 10.5.6 - Cannot reject multiple images on 2nd display Grid

Hi there,
For some reason, if I select multiple images on Grid View on my 2nd display and click 'X' to apply the Reject Flag, only the first image selected will get the X Flag. However, if I do the same exact with the Grid on my primary display, all images selected will get the X Flag.
Any ideas on what could be causing this? Is this a feature that I am missing an understanding of?
TIA!
Brian

Hmmmm... thanks for the confirmation. It just seems so odd that Adobe would feel the need to 'classify' the 2nd display as a second-class citizen. Would it really be that much more resource-intensive to allow me to take action on multiple photos on the 2nd display?
Oh well, perhaps in a future build.

Just downloaded CC 2014 trial. I cannot select any images and it's ruining the files

Just downloaded CC 2014 trial. I cannot select any images and it's ruining the files

Before reloading, I would try deleting the preferences. It may not help in this case, but it is worth a try.
In case you need help with that:
Reset Preferences
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT

Shift click on iPad with blue tooth keyboard doesn't select multiple images

HI
i have my iPad running iOS8 on Safari with a blue tooth keyboard In a WordPress slideshow website. The WP plugin does allow me to select multiple images on the computer but not on the iPad.
IS there a way to make this work?

No. There is not 'shift click' on an iOS device with our without a wireless keyboard.

MDM: Search for images in the dialog window "Select Multiple Images"

Hi,
are there possibilities to search for images in the dialog window "Select Multiple Images" (if you want to add a image to a record)?
I know the possibilities to sort the images and the possibilities with the data groups. But I don't know a possibilities to search for a single image.
Thanks for any help!
Best regards, Melanie

Hi,
      From the question you asked; its not much clear what your clear requirement is; but if its what i get then the solution is:
      How is that you want to select the image? With Image view or By viewing the image itself ? For it when u select "Select Multiple Images" you can find two as "Available Images" and "Selected Images" and in between u can find some buttons, after "All, Add, Remove and None" you can find two buttons "Thumb Nail" and "view Details". I think you can use these buttons for your solution.
      When you select "Thumb Nail" button you can see the image in real and select the image. OR you can select "View Details" and check the file name or path or the requirement as required.
      CHARAN
Lead, follow or Get out of way

TS3899 Just updated to 7.0.6. Cannot Select multiple emails to move/delete.

Just updated to 7.06. Cannot Select multiple emails to move/delete. I select Edit in any mailbox, trash or sent, then select one email to delete/move, after a few seconds, the email automatically 'unselects' the move and delete buttons deactivate, but the top status bar still has '1 selected'.
If i try to select multiple emails I get to the 3rd or 4th one and then they all auto unselect.
My Ipad without the update works fine. My daughters iphone 5 has the same issue and she just updated.

I have no problem selecting multiple emails on iOS 7.0.6
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Cannot select multiple images in iPhoto '08?

Similar Messages

Maybe you are looking for