Cannot select multiple speakers ( airport express)

cannot select multiple speakers in itunes ( have two airport expresses) ... tries to connect and then always times out.

Only firewall I have is what is standard on my mac, and if that is what your talking about, I do not know how you do that UDP traffic thing.

Similar Messages

Itunes / Multiple speakers / airport Express

When I select multiple speakes in Itunes i get an error saying "an unknown error occurred (-3256)." I can select the remote speakers by them self and they work fine but when I select all speakers or multiple speakers I get the error message. what can I do?

Only firewall I have is what is standard on my mac, and if that is what your talking about, I do not know how you do that UDP traffic thing.

Can't select multiple speakers in iTunes 10.3.1

Since updating to iTunes 10.3.1, I can no longer select multiple speakers (Airport Express, AppleTV) to stream music. Even though the checkbox looks clickable, it does not stay clicked.
I have a 2x2.8 Ghz Quad-core Intel Xeon MacPro running 10.6.8.

open system preferences
open network pane
select airport in the left list
click the advanced button
go to the TCP/IP tab
set the configure IPv6 field to OFF.
click OK
click apply
now try again to connect to your remote speakers.
if this doesn't help, you may be suffering from wireless interference.
download iStumbler and note the channels other networks in the vicinity are broadcasting on, then change the channel your network is using as far away as possible from those.

ITunes cannot connect to remote speakers / Airport Express

Hi Guys
This is a quick post with a problem & solution.
I've been searching for ages tonight to find a solution to my problem:
'iTunes suddenly cannot connect to my Airport Express Speakers" and could not find one answer on here, only a mixture of replies all over the net.
So, just incase some people are still looking for an answer:
What I did...
1. Go to System Preferences, Network.
2. Click Advanced, on the TCP/IP tab, set "Configure IPv6" to Off.
Open up Airport Utility, go to the Music tab, set a password (I did this just for the sake of seeing whether iTunes noticed that the Airport was now password protected, then atleast you know it's talking!)
3. Open iTunes, go to preferences.
4. Click on the devices tab, untick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
5. Close iTunes
6. Open iTunes, retick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
7. Connect to remote speakers worked!

thanks Simius,
I just tried what you said to do, i had it in Automatic, but when I momenterely switched to manual the fields were all blank so I left them that way and turned on to automatic as you said and left it in auto, then tried to change itunes speaker to remote airplay and it didn t work.
so i don t know what else to do, I read alot about this in the last few days the bug seems to be related to the newest itunes upgrade and with the presence of the IP6V not turned off completely.
in the old system one could turn it off completely, now the off button is gone.
there are work around using terminal, I tried that but it doens t recognize my commands, so it didn t work either.
anybody has any idea?
thansk a lot
D.

HT5517 Is there a way to select multiple speakers from my ATV3?

I have ATV3, an iPad2, a Sony Vaio laptop and another audio system connected to my WiFi network via an Airport Express.
Via ATV I can only select one speaker / output at a time (i.e. EITHER Airport Express OR ATV). When I have a party in the house (for example) I'd like to be able to select both to play the same music.
I know you I can select multiple speakers if I fire up the laptop and run iTunes (I then actually use the "Remote" app on the iPad, select my music library as the source and I can select mulitple speakers) but it doesn't seem possible with just ATV. Why not? I can see both outputs on ATV, I just want the option to be able to select both.
If my wife takes the laptop with her somewhere, I can't listen to my music throughout the whole house.
Seems a pretty big oversight - surely it'd be dead easy for Apple to do?

I beleive multi speaker output is strictly a function of iTunes. ATV1 was the hobby or beta environment and was a mix of OSX 10.4 (iTunes) and their developement of iOS. The multi speaker out was not a part of the further or current developement of iOS.
Still have an original atv out in the studio serving up music to the rest of the house... including the new appleTV2 in the living room

I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?

I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?

You've done great so far to upgrade to Leopard & install more RAM. Now install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
After you install the 10.5.8 update, click on the Apple in the menu & select Software Update. You will then be informed of some application updates. iTunes may be one of them. Then click to install the app updates.
 Cheers, Tom

SAPGUI JAVA 7.10 (OSX 10.5.1): cannot select multiple columns in ALV

Hi,
in sapgui java 7.10 (on mac osx 10.5.1) I cannot select multiple columns in ALV reports.
I can do it only in some transactions (like SE16). But on all our custom reports (REUSE_ALV_GRID_DISPLAY) in does not work.
Any hint?
Many thanks,
Lorenzo

Hi Lorenzo,
did you double check if selecting multiple columns works with SAP GUI for Windows in the same report?
If yes, I suggest to file a bug report so we can do a remote logon to run your custom report.
If not it might be because of REUSE_ALV_GRID_DISPLAY itself or your parameters calling REUSE_ALV_GRID_DISPLAY.
Best regards
Rolf-Martin

TS3899 Just updated to 7.0.6. Cannot Select multiple emails to move/delete.

Just updated to 7.06. Cannot Select multiple emails to move/delete. I select Edit in any mailbox, trash or sent, then select one email to delete/move, after a few seconds, the email automatically 'unselects' the move and delete buttons deactivate, but the top status bar still has '1 selected'.
If i try to select multiple emails I get to the 3rd or 4th one and then they all auto unselect.
My Ipad without the update works fine. My daughters iphone 5 has the same issue and she just updated.

I have no problem selecting multiple emails on iOS 7.0.6
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

I cannot select multiple objects.

I cannot select multiple objects within the file I'm currently working on. This has worked in the past. Have I inadvertently changed a setting?

Are you trying to select via Shift+click? If yes, try selecting items in Layers Panel and from the fly-out menu, choose Select items and see if it works.
Regards,
Pooja

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

Cannot select multiple airports using remote app.

Why can't I select multiple airport express units using the remote app?

Thanks for the reply.. I also tried that way.. I face couple of issues
1) I could not find an option of saving a Draft Message
2) After multiple recipients(I have selected 12 recipients) in "TO" section, if I type a word in "TO" such as "Pre", it shows me all the contacts containing "Pre" but I cannot select the last contact incase there are more than 20 contacts coz I am unable to scroll down till the end.. If I do so.. I cannot select coz screen scrolls up automatically..
Pls try ... If required I will insert video

Trying to stream from itunes on mbpro to two airports and cannot find "multiple speakers" command. Help?

I have two airports on our bus. I am set up to stream wireless to stereos but cannot find the "Multiple speakers" command.

see your other post
https://discussions.apple.com/thread/3099786?tstart=0

Can't Select Multiple speakers for AirTunes

I have had a problem for the past few days now where i can't select to use multiple speakers when using AirTunes.
This has never happened before, and was fine after the update to iTunes 7.
Is there something i need to change / select in my AirPort preferences to make multiple speakers enabled?

Do you have the latest Firmware of the AirPort Express V6.3?
There could be a problem with older versions of the firmware and the new iTunes 7. Then I would also update iTunes to the newest version 7.0.1.

Airport network - multiple Macs + Airport Express/Airtunes

Hello all - I am in need of some advice on how to correctly setup a home network.
We have an Extreme base station (one of the older dome shaped ones) connected to our DSL modem - from this we operate 1 G4 Powerbook, 1 G5 iMac, 1 Intel iMac, 2 iPhones. All can currently access wireless internet with no problems. I am trying to add my old model Airport Express to this setup so that I can use Airtunes from the 2 iMacs - specifically so that we can use the iPhone Remote App to control the music coming though our living room stereo.
I have managed to set it up so that I can use Airtunes from the Intel iMac, but it seems that i have to disconnect from the base station network to do so - i.e. I can either have internet on my iMac or Airtunes, but not both - as a result I cannot use the Remote App on my iPhone to control the music.
I obviously have the network set up incorrectly - what do I need to do? Do I need to startover with the whole network design?

Here are the basic steps for configuring the AirPort Express Base Station (AX) for AirTunes ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
To set up AirTunes on the AX, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o Wireless Mode: Join an Existing Wireless Network (Wireless Client)
o Wireless Network: <select the existing wireless network>
Music tab
o Enable AirTunes on this base station (checked)
o Enable AirTunes over the Ethernet port (optional)
o iTunes Speaker Name: <whatever you wish>
o iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

ITunes 7.0 does not allow selection of speakers for express.

The drop down menu for speaker selection is no longer at the bottom of the window for iTunes. Now instead there is a button that says Burn Data Disc. This new release of iTunes is really amateurish. Don't you guys test your apps anymore?

SOLUTION! iTunes won't Recognize Airport Express + External Speakers
This solution worked for me a few minutes ago:
1) RUN AIRPORT SETUP ASSISTANT
2) Change setting on an existing Airport BASE Station
3) CONTINUE
4) (Choose network)
5) Optional: IDENTIFY to make sure it's communicating with the Airport Express)
6) CONTINUE. (It will read the configuration and present the details of how its configured.)
7) CONTINUE. (It will reinstall the configuration just as you have it.
8) Voila!
In my case, I had TWO Airport Expresses, one of which did not appear on the drop down menu box in iTunes, but after configuring just one of them as above, they BOTH appeared on the menu and both worked!
Some other solutions have been offered that assumes you have an Airport Base Station and have the iPV6 setting to "off" but most people use the AirTunes (i.e., iTunes direct connect with Airport Express+Speakers.) This solution works and it didn't matter what your iPV6 or base station was.
Good Luck!
Powerbook G4 + others Mac OS X (10.4.7)

Cannot select multiple speakers ( airport express)

Similar Messages

Maybe you are looking for