Cannot select multiple video clips at a time

With the previous version, I could simply select all and import all my videos and pictures at once, in the order I copied them to my hard drive. Now, I have to "select entire clip" then, press letter E on every video clip, then, go back and add pictures. This is a huge downgrade from the previous version of IMovie.

hello ,thanks for jour mail ,but my English is very very bad sorry but
many thank for your feedback. Hav a nice Day
Am 09.12.2014 16:57, schrieb carpmusic:
>
Replace audio in multiple video clips at one time
created by carpmusic <https://forums.adobe.com/people/carpmusic> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6998981#6998981>

Similar Messages

Can't select multiple video clips to import into iMovie

Hi, i can't select multiple video clips to import into iMovie, it only lets me import one video at a time. Apple please fix in next update or if anyone has a solution please post.

Obviously you can not select the video to import until after iMovie populates the list of videos that are available to be imported
LN

Replace audio in multiple video clips at one time

Hello. I am new to the forum so I apologize if I break any of the rules!
I have a collection of tutorial videos, all edited but the audio had some balance issues. The files were not in Premiere Pro at the time. They are the final edited videos but then I was told the audio needed to be adjusted.
I have re-balanced the audio, saved the audio as wav files and now I need to replace the old audio (in the finished video file) with the new audio (the wav files I edited and saved). The timing is all the same. It's just a matter of replacing the current file.
Is this doable as a batch process? Is it doable in Premiere Pro or do I need to use Audition or some other Adobe software?
I hope this makes sense.
Thank you in advance!
Alan Read
SC, USA

hello ,thanks for jour mail ,but my English is very very bad sorry but
many thank for your feedback. Hav a nice Day
Am 09.12.2014 16:57, schrieb carpmusic:
>
Replace audio in multiple video clips at one time
created by carpmusic <https://forums.adobe.com/people/carpmusic> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6998981#6998981>

How do I select multiple video clips in iMovie?

I want to select a lot of video clips from the Event Library in iMovie and move them into a Project for editing.
However as there are no up/down arrows on the scroll bar it is really difficult to highlight/select using the cmd button (as I then need to grab the scroll bar and move it down at the same time).
Is there an easy way to do this?
For instance, can I change the clips from visual to a list of file names that I could just then transfer to my project and then switch back to the visual view of each file/clip?
Thanks.

You can also select 'ranges' of clips as you describe using the Shift key. First select #1 clip, hold down Shift, then click on the #29 clip. This will get ALL the clips between #1 and #29 without clicking individual clips or selecting all and chippping away. Same goes for the second example. Click once on the #71 clip then hold down Shift, and click the #100 clip, and everything in between will also be selected. So there's two kinds of clicking:
1. Command/Click (for selecting or deselecting one at a time)
2. Shift/Click (for selecting ranges or deselecting ranges of clips all at one time)

I cannot select multiple contact at the same time for e-mail sending

Please suggest that, how to select multi contacs at one time.

alexanderforce wrote:
I used to highlight several Genres at once and hit shuffle, playing all of them. The new iTunes won't let me!
Alexander, On my machine it works as follows in iTunes 11:
Enable column browser from the View menu. In the Genres column of the browser, use CTRL-click (in the Mac I think that is Option-click but if it doesn't work, try CMD-click) to select the Genres you want. Also activate Shuffle (crossed arrows, or via the Controls menu). Start playing, and it will shuffle through the songs of the selected Genres.

How do I add multiple video clips at once to timeline

I would like to add several short video clips to the iMovie (ios) timeline all at once. Is there a way to accomplish this or do we have to select everything one clip at a time?
Thanks

or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Downloaded Mountain Lion and now not able to select multiple email messages at a time for deletion what gives?

Downloaded ML last night now one little glitch seems to be that I cannot select multiple messages at a time to delete. With the massive amount of email I receive, this is a problem. Cannot seem to find any simple fixes in preferences. Any ideas?

you could use one hand to do this, before ML. select one email and drag up/down with the cursor to select more. selecting/shift key is the normal multiple selection operation. that's two handed.
if there is empty space at the bottom, it works.
i did submit this through the feedback process. i hope the functionality returns.

Cannot select multiple speakers ( airport express)

cannot select multiple speakers in itunes ( have two airport expresses) ... tries to connect and then always times out.

Only firewall I have is what is standard on my mac, and if that is what your talking about, I do not know how you do that UDP traffic thing.

TS3899 Just updated to 7.0.6. Cannot Select multiple emails to move/delete.

Just updated to 7.06. Cannot Select multiple emails to move/delete. I select Edit in any mailbox, trash or sent, then select one email to delete/move, after a few seconds, the email automatically 'unselects' the move and delete buttons deactivate, but the top status bar still has '1 selected'.
If i try to select multiple emails I get to the 3rd or 4th one and then they all auto unselect.
My Ipad without the update works fine. My daughters iphone 5 has the same issue and she just updated.

I have no problem selecting multiple emails on iOS 7.0.6
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Cannot align/trim video clips

I've been trying for the better part of a day to figure out how to precisely align and trim two video clips, but have had no luck. I grew up using Windows Movie Maker quite a bit to edit videos (covers of songs, so they all involve starting with a title slide, fading into a video, and syncing the whole video with a prerecorded audio track), and what I thought would be universal in video editing programs doesn't seem to work the way I thought.
The main problem I am having is the inability to arrange and edit multiple video clips in a linear fashion. For example, if I have clip A, a few seconds of video with the title of the movie, and clip B, the actual video, I cannot seem to precisely edit the two together. In the background is an audio track, so the video has to be synced with the audio. Problem is, I can't just trim either clip A or clip B by a few frames to get it to sync. If I get the clip of the performance in sync with the audio, inserting a title slide pushes the rest of the video to the side, rather than just overtaking the performance video.
I should also mention that I have another video in the picture-in-picture (rhythm guitar track, lead guitar track), so the two need to be perfectly in sync.
I tried to get around this by cutting the clips to the same length. Each of my two clips that I try to align are 00:03:51:06. I thought that by doing this, I could drag the main video to the timeline, and then insert the picture-in-picture video on top of it so that they would be in sync. iMovie doesn't seem to want to align the two clips even though they are the same length, and not being able to precisely edit them is making it so that I can't align them properly.
I know this is a basic movie editing program and I may be expecting too much of iMovie, but is there something I'm missing here that's preventing me from making clean edits?

OK I see the problem,
I've made some videoclips in the past (barbershop quartet), and have to admit that iMovie is limited.
As I'm from Holland, it's hard to me to give you an exact advise of what is and isn't possible in English (as all my menu's are in Dutch and not English), as it's also depends on what kind of footage you have and what you're trying to achieve. The only thing I can help you with is point out some directions you could dig into:
1. You may study the function of beatmarkers and all the possibilities to synchronize music to clips/beatmarkers.
2. As I mentiond earlier you can possible combine that with thwe functionalitty of the precisoon editor, you can make precis edits as wel for vidoe and audio (put apperntly you already studied that.
3. For the picture in picture there is no solution (as far as I know). You might experiment with "cutaway" and/or "next to each other" when it comes to inserting clips.
4. For the production of videopodcasts I used Garageband for fine tuning voice-overs and background music. In Garageband it is possible to make very precise edits on imported video tracks. I asume Logic has similar functionallity. This means you perhaps have to move back and forward video/audio from iMovie to Garageband (or Logic) and visa versa.
If that is all to much of a hassle (which I can imagine) perhaps Final Cut Pro X is you're only option.
Succes, sorry I cann't help you further.
Ben

SAPGUI JAVA 7.10 (OSX 10.5.1): cannot select multiple columns in ALV

Hi,
in sapgui java 7.10 (on mac osx 10.5.1) I cannot select multiple columns in ALV reports.
I can do it only in some transactions (like SE16). But on all our custom reports (REUSE_ALV_GRID_DISPLAY) in does not work.
Any hint?
Many thanks,
Lorenzo

Hi Lorenzo,
did you double check if selecting multiple columns works with SAP GUI for Windows in the same report?
If yes, I suggest to file a bug report so we can do a remote logon to run your custom report.
If not it might be because of REUSE_ALV_GRID_DISPLAY itself or your parameters calling REUSE_ALV_GRID_DISPLAY.
Best regards
Rolf-Martin

I cannot select multiple objects.

I cannot select multiple objects within the file I'm currently working on. This has worked in the past. Have I inadvertently changed a setting?

Are you trying to select via Shift+click? If yes, try selecting items in Layers Panel and from the fly-out menu, choose Select items and see if it works.
Regards,
Pooja

Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

Yes.
iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

Multiple Video Clips

Does DVDSP4 support multiple video clips in a track? It allowed me to add a video clip after the first one but the second clip is black when I play it. This is for a dance recital where i want each section title screen to be separate from the video.

Hi:
Most probably you find the black playback (but audio is playing fine) in Simulator, right? Try pausing and starting again during Simulator.
It's a kind of bug in Simulator. If you make a trial build you'll find everything is OK.
Hope that helps !
Alberto

Cannot select multiple video clips at a time

Similar Messages

Maybe you are looking for