Cannot select parity in new disk when choosing tiered storage

Hello
I am running a small lab experiment. I want to add 3 HDD and 1 SSD to a pool and create a tiered parity vDisk. But I cannot do this, the option is just not there. I figured it was because of only 1 SSD, so I added another, option still not
there. So I added a 3. The parity option is still not there. I'm running this experiment in a virtual environment in hyper-v and the disk are added thru hyper-v. But I have set the disks up correctly like this:
Get-StoragePool
SATA_Pool | Get-PhysicalDisk | ? FriendlyName -eq "PhysicalDisk4" |
Set-PhysicalDisk -Mediatype SSD
Get-StoragePool
SATA_Pool | Get-PhysicalDisk | ? FriendlyName -eq "PhysicalDisk1" |
Set-PhysicalDisk -Mediatype HDD Get-StoragePool SATA_Pool | Get-PhysicalDisk |
? FriendlyName -eq "PhysicalDisk2" | Set-PhysicalDisk -Mediatype HDD
Get-StoragePool SATA_Pool | Get-PhysicalDisk | ? FriendlyName -eq
"PhysicalDisk3" | Set-PhysicalDisk -Mediatype HDD
Is this a bug or what is the requirement to get this working?
Thanks

You cannot use parity or dual parity when using tiered storage. See:
Automated Tiered Storage with Windows Server 2012 R2
http://blogs.technet.com/b/keithmayer/archive/2013/09/13/step-by-step-build-an-automated-storage-tiers-lab-with-windows-server-2012-r2-and-powershell.aspx
Note: When
using Storage Tiers, Parity layouts are not supported. 
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

  • "cannot read or write to disk" when transferring itunes TV shows to iPod

    I have downloaded two TV shows from iTunes, but cannot get them transferred to my iPod. When I click "Update iPod," with one of the shows selected, it will begin to download to the iPod and get ALMOST to the point of finishing, and then I will get an error message stating that the iPod can't be read or written to. At first I thought I just had a corrupted video file (although it plays fine on my computer), so I downloaded a second TV show. Same thing. I have downloaded some music vidoes from iTunes, and they transfer perfectly to my iPod. I've noticed that since I downloaded the latest iPod updater and version of iTunes, that I've had the same problem getting a few songs to transfer to my iPod from CDs as well, with the can't read or write error. This only happens to maybe one song out of thirty, but it is still annoying. Maybe it is the updater??
    If anyone out there can help me, I would really appreciate it since I'm dying to watch these shows on my iPod! Thanks in advance!!
      Windows XP  

    I did the 5 R's last night, and now my iPod won't update any songs. The iPod is showing up in iTunes, but the "Update iPod" option is grayed out. Also, before when I had installed my iPod, it appeared in iTunes with my name...now it just says IPOD. I assume that's because it's back to the factory settings, but thought it was odd. (Yes, I know how to rename it.)
    Actually, after I ran the iPod updater to completely restore my iPod, it sat there frozen for hours with "Do Not Disconnect" on the screen, NOT flashing. Even after I disconnected the iPod (I had to turn off the computer completely to do this; otherwise, the USB port refused to stop running), the message just sat there. I had to reset it to get it to the point where I could select my language.
    Any suggestions? I'm considering just wiping out everything (backing up my files, natch) and starting over with the CD that came with the iPod in the first place.
    Windows XP

  • Why I cannot select on user_tables, user_views  etc when I am DBA?

    I came across something odd:
    I am logged on as DBA, when I do:
    Select * from user1.user_tables
    It gives me
    ERROR at line 1:
    ORA-00942: table or view does not exist
    I know I can use:
    Select * from dba_tables where owner = ‘USER1’
    but I am DBA and I can do select on every other thing in USER1 schema; why do I get errors on such statements.

    Run the following, send the results :
    DEFINE B='YOUHRIS'
    Prompt USER INFORMATION
    SELECT
    ' User '||username||'''S Account Information',
    ' Account Status => '||Account_status,
    ' Default Tablespace => '||default_tablespace,
    ' Temp Tablespace => '||temporary_tablespace
    from dba_users where username=upper('&&B')
    prompt OBJECTS OWNED BY USER
    select a.username LoginId,
    'User '||nvl(b.owner,'Does Not Own any objects..') ||' Owns ' ||nvl(b.cou,0)|| ' Nos Of ' ||nvl(b.object_type,'Objects')
    FROM
    dba_users a,
    (SELECT OWNER,OBJECT_TYPE,COUNT(OBJECT_NAME) cou FROM DBA_OBJECTS GROUP BY OBJECT_TYPE,OWNER ORDER BY OWNER,OBJECT_TYPE) b
    where a.username=b.owner (+) and a.username=upper('! &&B')
    Prompt SYSTEM PRIVIELGES GRANTED TO THE USER
    SELECT
    nvl(b.grantee,'No_System_Privileges_Granted'),nvl(b.privilege,'null')
    from
    dba_users a,dba_sys_privs b
    where a.username =b.grantee(+) and grantee=upper('&&B')
    Prompt ROLES GRANTED TO THE USER
    SELECT
    nvl(b.grantee,'No_Roles_Granted'),nvl(b.granted_role,'null')
    from
    dba_users a,dba_role_privs b
    where a.username =b.grantee(+) and grantee=upper('&&B')
    Oded
    [www.dbsnaps.com]
    [www.orbiumsoftware.com]

  • All tools in panels toolbar are disabled meaning I cannot change to any of the alternatives-E.g. Cannot select various Type tools as when I drag out I get the "disabled (Stop symbol)". Really need help with this, been like this for a while now. Many Thank

    Panels tool bar is completely unresponsive. Cannot change to any of the alternatives.
    I am using The most up to date Adobe Illustrator CC on Yosemite.

    I actually can't believe I was being that stupid.
    Thank you very much! This solves the issue.
    Many Thanks,
    Ronan

  • HT1386 Cannot select calendars or address books to sync.

    Select calendars and select address book are greyed out. Cannot select them in new ITunes on Yosemite.

    Hi - I sync my home iMac and my work PC w/ XP to the iPhone daily.
    First, make sure before you sync that the tab next to info (I can't look right now) has the calendar and contacts that you want to sync checked. It always works for me. When given the choice, you wants to select merge the data.
    For calendar items:
    . On the PC under Outlook -- you Mac calendar items will be merged into your Outlook calendar.
    . On the Mac - your Outlook calendar items will be maintained separately.
    For Contacts:
    . On the PC - your Mac contacts will be merged into your Outlook contacts.
    . On the Mac - your Outlook contacts will be part of your overall AB contacts. You can still, however, maintain separate groups.
    Hope that helps.
    iMac, PowerBook, MacBook, iPhones   Mac OS X (10.4.10)  

  • How do you create a new page when user checks a box?

    I guess it would be a check box.  I'm looking for a way to have the user select create a new page when the user runs out of space in the text box that is given.  So if its possible is there a way to create a new page with a continuing text box when the user has selected the create a new page check box.  Thanks.

    Hi,
    You can achieve this by just making some changes to the textfield (and the page layout).
    First, select the textfield and then in the Layout palette, tick 'expand' height to fit'. When you preview the form, you will see that as you type information into the field, a scroll bar will appear. When you exit the field, it will expand automatically to display the full contents.
    Now the problem will be that the textfield will expand over objects that are positioned below it - not good!
    So what you need to do is set up your form for a flowed layout. First select all of the objects that do not grow in size and wrap them inside a 'positioned subform'. When you select the subform you can see this setting in the Object > Subform palette. You should name the subforms in the hierarchy. So you will end up with a positioned subform above your textfield and a positioned subform beneath your textfield (if you have objects beneath it).
    Then select page1 in the hierarchy and in the Object > Subform palette, change the content to 'flowed'. Hopefully the layout won't change too much (because you will have most of your objects in their positioned subform).
    Last step is to select the textfield and in the Object > Field palette tick 'Allow page breaks within content'. This tells Acrobat/Reader to split the object if it overflows onto a new page.
    Now save the form as a Dynamic XML Form in the save as dialog and previewed it. Now when the textfield expands it will push objects beneath it down. Also when it gets to the bottom of the page, it will start a new page automatically and continue the content on the new page.
    Here is an example:
    https://acrobat.com/#d=kwa4t2vu6mXbgMCyqEF0aQ
    Paul Guerette is giving an online tech talk on dynamic forms on the 30 November, which I would recommend. Details here:
    http://acrobatusers.com/events/49326/tech-talk-developing-flowable-form-content
    Hope that helps,
    Niall

  • HT204053 i cannot access my apple new ID

    Dear sir,
    i cannot axxess my apple new ID. when i signin this ID on appstore a message appear u have not aggree your term and condition. when i open my Tern & Condition page through my mailing address ([email protected]) there are no AGREE button on there.
    please guide me if i am doing wrong.
    take care
    Regards,
    Malik Sajid

    Hi Ria,
    Thanks for visiting Apple Support Communities.
    If you are having trouble accessing the App Store and iCloud with your Apple ID, start with the troubleshooting steps in this article:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Cheers,
    Jeremy

  • I previously used Indesign CS4. I now have recently purchased Indesign CC. I have a Mac Yosemite 10.10.3. When I print, I cannot select my paper stock, other than what is in the print dialogue box, i.e. art paper. In Indesign CS4, I could choose fine art

    previously used Indesign CS4. I now have recently purchased Indesign CC. I have a Mac Yosemite 10.10.3. When I print, I cannot select my paper stock, other than what is in the print dialogue box, i.e. art paper. In Indesign CS4, I could choose fine art paper etc. Where can I find this option in this new version?

    With Snow Leopard, the Printing of PDFs has changed. Try using the highlighted option

  • Cannot select name when creating new DC

    Hi all,
    It seems I encounter this kind of problems over and over again when dealing with NWDI )-:
    In this thread Cannot select vendor when creating new DC I couldn't select vendor.
    I installed a new NWDI system (version is 7.18), did all the post installation steps including the configuration of a name server on the SLD but I cannot select "name" and the vendor I entered is not shown (even if enter it manually I cannot select name so it doesn't help - see snapshot).
    [snapshot|http://img134.imageshack.us/i/nwdi.jpg/]
    Snapshot: http://img134.imageshack.us/i/nwdi.jpg/
    I did name server config on : http://server:port/dtr/system-tools/administration/NameServerConfiguration
    Name prefixes are defined under 'Name Reservation -> Development Component Name' - I used <x.y>/* and <x.y>/tst (x.y is namespace like com.omri).
    I updated CMS after setting the name server, restart J2EE and did all kind of voodoo without success.
    I use local SLD which is part of the J2EE.
    I don't get any error messages (from NWDI/SLD/NWDS).
    I don't remember this kind of problem with NWDI on 6.40 versions.
    Moreover I installed and configured several systems on 7.12 & 7.13 versions without any problems but with 7.14 & 7.18 I've problem with setting the name server...
    Please help,
    Thanks,
    Omri

    Solved it on my own by deleting and creating the track again (with the same settings!!!)

  • Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into i

    Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into it. Preselected music just goes on.

    I am talking about iPhoto. In my old Mac even in Books choosing slideshow gives a pop up where you can select a music from I tunes library. In this new one I can stop the slideshow with cursor and it shows music option but it is, as I said dead. Does not response at all to commands.

  • Cannot select local disk in Time Machine - New Lion Install

    I wiped my iMac with 10.6, logged in then immediately installed Lion.  When launching Time Machine and "selecting a disk" I cannot select any disks, none are present and it wants to search for a Time Capsule only.  Please help.
    -Aaron

    Hi a:
    Welcome to Apple discussions.
    I am preaching, but +"wiping/erasing a HD"+ should be reserved for true disasters. That is a Windows process.
    Now, trying to help (I treasure my own photos - a lot), go to your home folder (~pictures). If something called iPhoto library is there, highlight it, open Time Machine, and then restore it.
    If that does not fix the problem, try posting in the iPhoto forum. There are some real experts with iPhoto problems that may be able to help.
    Barry

  • I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.  I get the message "Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already

    I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
    I get the message “Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already exists on this disk”
    If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
    I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
    How can I solve this problem

    Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

  • "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error

    Hey Im getting the following error when trying to install windows from a USB. 
    "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
    I installed the windows 8 (64bit) iso using boot camp to a usb.  I was able to do this after changing the info.plist to allow me to place the iso on the usb.  After I make the partition and start the install, I get the above error.  I formatted the partition in the installation but I keep getting this error.  I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on.  If you can help me that would be greatly appreciated

    I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
    This is the Windows error:
    Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
    Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
    I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box

    '''I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box. Firefox displays gooblygook even though the file name is an html, Windows Notepad crashes, MS Excel does not recognise the file type. MS Word displays goobblys also when the file has no filename extension.'''

    If you use print to file then you get a file that is meant to be send to a printer and that file has all kind of formatting code for that specific printer.
    Opening such a file in Firefox or a text editor can only work if you use a text only printer to print the file to, so make sure that such a printer is installed and selected.

Maybe you are looking for