Cannot select Sender System in SetUp of Bizpackage

Hi all,
I need to create a simple B12B1 scenario to send the items from an headquarter SAP B1 Database to a subsidiary SAP B1 Database (all the database and B1iSN are in the same machine).
I've
-setted up the Landscape in the "Integration application explorer" (and tested succesfully the connection)
-assigned the system for the Landscapes in the "SAP Business one 2007 integration for SAP NetWeaver"
-mantained system properties (but there i don't know which data i've to insert)
-setted up the event sender
Next I've wanted to create the BizSteps so I clicked
Initialization>Define> selected Customizing Data and then in the BizPAckage Combo "Product"
after that the Receiver System was automatically valorized but the sender system combo remains empty so i couldn't proceed with the bizstep creation.
Could someone give me an help to finish the scenario creation please? What's wrong with my procedure?

Luca,
If you review the link that I had in a previous thread with you, it outlines how to create a scenario in B1iSN2007A for a B1 PO to a B1 SO. While this is not exactly what you are trying to do, it will basically outline that steps that you need to go through to create a new business scenario.
Also, you may possibly want to download the new version of B1iSN 8.8 as this has the scenario that you are looking for already built. B1iSN 8.8 is currently in ramp-up so you have to be part of ramp-up to gain access to it. It may be worth checking. You will find the download (if available to you) on the SAP PartnerEdge Portal where you would download B1 installations and updates.
Eddy

Similar Messages

BPM--cannot convert sender logical system to ALE

Hi
My Scenario is file-bpm-idoc.. Where i am getting an error saying "cannot convert sender logical system to ALE" for the BPM.
i tried entering the logical system for the BPM in adapter specific attributes but it says logical system is already being used by some other service..
So i tried header mapping in receiver agreement now the messages are failed at the intital stage before entering the BPM only only saying cannnot find recvr agreement..
My sender system BS_EXT_100
BPM IP_calldoc
Recvr system BS_EDCR/3_200
i did the header mapping for recvr agreement of BPM by selecting the sender service and entering "BS_EXT_100"
Where am i going wrong...

solved it myself.. Thanks

In system preferences, under extensions, cannot select mail, iMessage, airdrop as extensions to use to share content

I cannot select mail, messages, or airdrop as an extension to use to share content (i.e.: to share a website), they are greyed out in my share menu, in the Extensions folder of system preferences

The screenshot shows nothing abnormal.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Switched from Samsung Note 2 to iphone 6. Faced Difficulties while sending message. [1]Multiple Selection of receipients is not available. Eg. If I click plus, it shows me all the contacts but i cannot select multiple contacts using checkbox

Phone : IPhone 6
OS : 8.1
Problem Statement : Multiple Selection of Recipients while drafting New Message in SMS.
Expected Solution : Checkbox should have been provided to select multiple contacts using one screen

Thanks for the reply.. I also tried that way.. I face couple of issues
1) I could not find an option of saving a Draft Message
2) After multiple recipients(I have selected 12 recipients) in "TO" section, if I type a word in "TO" such as "Pre", it shows me all the contacts containing "Pre" but I cannot select the last contact incase there are more than 20 contacts coz I am unable to scroll down till the end.. If I do so.. I cannot select coz screen scrolls up automatically..
Pls try ... If required I will insert video

DI-Error: You cannot select batch or serial numbers for a closed row

Hello Experts,
I have several B1-Systems connected to R/3-Systems via B1iSN.
In B1 for example I have 2 rows in Purchase Order. One row was closed by a goods receipt - 1 row is still open.
From our R/3-System we send Order-Acknowledgements to B1. Because line 1 is already closed we want to ignore row 1 and update only information in row 2. By using KeyExpansion I could solve that requirement (check in B1-System if row is already closed -> insert row in IDoc only with LineNum). For example:
<Document_Lines>
*<row>* 
 *<LineNum>0</LineNum>*
*</row>*
 <row> 
 <LineNum>1</LineNum>
 <ItemCode>ABCDEFGHIJK</ItemCode>
</row>
</Document_Lines>
Unfortunately DI-API does not allow to update each row separated. I always have to send all rows in IDoc even if one row is closed.
For one B1-Company batchnumbers on every transaction is required. When creating Goods Receipt we have to define a batchnumber for item. But now if I want to update a open row (as described above) I get an B1iSN-Error:
DI Error: (-10) You cannot select batch or serial numbers for a closed row
Any ideas to solve that Error? Thanks.
Regards,
GB

Hi Bastian,
I have still one open question. How to tread Document Lines Additional Expenses?
If I use the logic of visual order I still get the error "You cannot select batch or serial numbers for a closed row".
Example:
<Document_LinesAdditionalExpenses>
- <row>
 <LineNumber>4</LineNumber>*no expenses*
</row>
- <row>
 <LineNumber>0</LineNumber>*no expenses*
</row>
- <row>
 <LineNumber>1</LineNumber>*no expenses*
</row>
- <row>
 <LineNumber>2</LineNumber>*no expenses*
</row>
- <row>
 <LineNumber>3</LineNumber>*expenses correct*
 <ExpenseCode>3</ExpenseCode>
 <LineTotal>10.00</LineTotal>
</row>
</Document_LinesAdditionalExpenses>
How can I solve that?
Thanks and regards,
GB

GRC10 - Password Self Sercice - Cannot find the system/user

Hello
I am trying to setup Password Self Service for AC10 component. I have completed the following:
1. Maintain Data Source Configuration - As per SU01 on the Plug-In system
2. Define the ABAP Connector
3. Maintain Password Self Service Configuration - Challenge questions and attempts.
I have then registered my Security Questions and responses. When I try to reset my password, the system prompts properly for the Challenge questions and takes me to the next screen to select the system.
That is where it generates error message - "No records found for the search criteria entered."
The RFC Connector works perfectly well in Emergency Access and Risk Analysis.
I apprecaite your help and thank you for taking time to answer this issue.
Snehal Pandya

Hi Snehal
Have a read of the following thread where this has been discussed: GRC AC-Password self service
Your options:
Connect to another Datasource - like AD/LDAP if you can somehow link your User Ids for network account to ERP
Switch off the verification (I spell out the risk and more reliance on challenge response)
Make each user a GRC user which means they then need to know their GRC password as well which puts you back in the same issue on a different system (what happens if user forgets ERP and then GRC password). This is really a different flavour of option1 as you are making GRC your data source. If each user is a GRC user then also little added value in using End User Login Functionality.
Your catch-22 to include authentication is that your users cannot authenticate with ERP password as they are using this functionality because they forgot it.
Regards
Colleen

IDOC in sending system

hi friends,
When SAP r//3 in sending system for transforming the IDOC...
How the IDOCs are posted ?
whether mannual or automated?
if automated what is the process.

How the IDOCs are posted ?
check this link for ALE setup http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
whether mannual or automated?
Depends on the setting in partner profile. If transfer immedialtly is enabled then it is automatic elase if collect idocs is selected then it is mannual

So I have just had my potentially duff hard drive replaced and uploaded my data from time machine to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. How do I get back to qwerty?

So I have just had my potentially duff 1Tb hard drive replaced by apple and uploaded my data from time machine only to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. Any idea how I can get back to qwerty?

roxandiv wrote:
pages is now speaking to me in a different language.
What exactly are you referring to? Are the menus or templates for Pages in a different language? Does something strange appear on the screen when you type?
Could you perhaps use the Camera icon here to post a screenshot of what you are seeing?
To make sure you have the right keyboard, go to system preferences/language & text/input sources and make sure that only the box for US or British is checked (and that the box for French or German or anything else is not checked).

Cannot select and move in mountain lion

I am running 10.8.4 on an early 2009 15'' MBP, and I have been having issues where I cannot select an object (file or folder) and move it. This is affecting my other programs, for example, i find that I cannot select and move cursor in Maya.
Not sure why, has anyone seen this before? and can I fix it somehow? I tried restarting my computer multiple times but the problem presists.
thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

IDOC sender system settings

Hi,
I am trying to do the settings for the idoc sender system the steps i have completed are..
1) sm59..maintain a rfc destination from idoc sender to the integration server.
2) we21..created a tRfc port with the rfc dest from step1.
step 3 is where i am stuck...
3) we20....to maintain the partner profile and partner number...there isint enough info in the xi config guide..
any pointers..would be appreciated.
Regards
Ravi

ALE settings.
SAP XI1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP XI towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.

Cannot select name when creating new DC

Hi all,
It seems I encounter this kind of problems over and over again when dealing with NWDI )-:
In this thread Cannot select vendor when creating new DC I couldn't select vendor.
I installed a new NWDI system (version is 7.18), did all the post installation steps including the configuration of a name server on the SLD but I cannot select "name" and the vendor I entered is not shown (even if enter it manually I cannot select name so it doesn't help - see snapshot).
[snapshot|http://img134.imageshack.us/i/nwdi.jpg/]
Snapshot: http://img134.imageshack.us/i/nwdi.jpg/
I did name server config on : http://server:port/dtr/system-tools/administration/NameServerConfiguration
Name prefixes are defined under 'Name Reservation -> Development Component Name' - I used <x.y>/* and <x.y>/tst (x.y is namespace like com.omri).
I updated CMS after setting the name server, restart J2EE and did all kind of voodoo without success.
I use local SLD which is part of the J2EE.
I don't get any error messages (from NWDI/SLD/NWDS).
I don't remember this kind of problem with NWDI on 6.40 versions.
Moreover I installed and configured several systems on 7.12 & 7.13 versions without any problems but with 7.14 & 7.18 I've problem with setting the name server...
Please help,
Thanks,
Omri

Solved it on my own by deleting and creating the track again (with the same settings!!!)

How to catch the message in RWB and send back to sender system

hi
I've proxy->xi-->jdbc scenario, when ever there is some error and the data can't be intered in the data base, we can find error message thrown by the data base in the RWB , i want this error message of the RWB to send back to the sending system
pl let me know if its possible and how ???
points shall be rewarded
Thanks & Rgds ,
mojib

check this link, and use as per you requirement
XI: How-to on JDBC receiver response
JDBC Receiver Adapter -- Synchronous Select Step by Step
Regards
Chilla

I am so frustrated. I put ab object and/or a text box on a page and then cannot select it - the Text cursor (not pointer) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing,

I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.

I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.

AirPlay Output Cannot Select

Hi,
I purchased a Bose wifi speaker. When I leave work and come back I cannot select my speaker using AirPlay. I see my speaker name available for AirPlay output, however, every time I select the speaker it automatically goes back to my built-in speakers. I have to restart my system in order to select the external speaker for AirPlay.

Hello redbush,
The article linked below details some useful troubleshooting steps that can help resolve issues with AirPlay on your Mac.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

[SOLVED!] Cannot select internal/external mounts .......

Greetings,
After being away doing some distro-hopping, I drifted back over to arch. Now I managed to work through many problems such as getting keyboard and mouse support without disabling hotplugging, and all of that, and am enjoying using ext4.
However there are two issues that I can't seem to overcome, and would greatly appreciate any help I can get in overcoming them...
1.) I cannot select internal mounts or usb cards or cd's, etc..
Basically I was trying to be able to mount/access my NTFS partition. At first I was getting that pesky "you can't do this, policy says no" error so I dug through wiki articles and forum posts. After following them (including doing computer restarts) I could not select either my ntfs partition or my mounted dvd disk. Basically what would happen is I would try to select it but my selection would bounce back to my home folder. No errors or nothing. It's like there is an invisible rubber force field preventing me from even thinking about touching those drives.
Now I have tried everything I can think of. I have removed everything I have done when following the wiki to get to a pre-trying to mount ntfs stage. Problem remains. I have dug through the wiki and countless forum posts trying out everything that looks feasible to my problem. Problem remains. I am now on day two, several advil later, and tired of hearing my computer laugh at me.... I really don't want to go through the whole reinstall trip... I already spent a lot of work before trying to mount my ntfs drive getting my computer just how I want it. So any help in fixing this without a reinstall would be most appreciative. I will admit that I am tired of digging through the wiki, so if you must point me back to it, please kindly clarify what I may have missed instead of saying "read this" because 9 out of 10, I have read it and it hasn't helped.
2.) How do I get wicd to auto start?
Ok so I have installed wicd as my network manager. I followed the wiki to the T and it works great. However every time I restart (which I did a lot of trying to fix problem #1) I would end up having to restart the hal and wicd deamons then start up wicd again... So how do I get wicd to autostart?
Thanks in advance for any and all help on these two issues. If I posted in the wrong area, please forgive me. However I feel that these are newbie questions...
Last edited by mythus (2009-03-12 18:49:33)

Greetings,
I am using KDEMod current (i.e. KDE 4.2.1). I installed the Arch way, not the chakra tribe method, though I did test tribe earlier, it's neat.. just not as hands on...
I tried accessing with dophin. I would have tried with konqueror but as I recall konqueror now uses dolphin as kpart for file management so the results should be the same...
Anyways,
Here's my fstab...
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=5f4a5905-886b-4985-a383-f8bd4bb990f7 / ext4 defaults 0 1
UUID=abb1dfe2-a2c8-4892-82cf-38e6cf50dee9 /home ext4 defaults 0 1
UUID=eabea9d9-d15d-48e0-993e-212d162823d9 swap swap defaults 0 0
You should notice that I didn't add my ntfs partion to fstab as I read somewhere that with hot plugging you weren't supposed to...
Here's my rc.conf - daemons
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network wicd netfs crond alsa hal kdm)
If you need the rest of my rc.conf, let me know. However I believe that only the daemons should matter with wicd...
And btw- thanks for your reply.

Cannot select Sender System in SetUp of Bizpackage

Similar Messages

Maybe you are looking for