Cannot send compressed PDF which is does NOT exceed MAX size?

I am trying to send some PDF's to be opened in IBook which works great, but I keep exceeding the max size which does not reflect the true size of the PDF I am trying to send.
When I try to send a PDF which is 22.1MD, I get a message from the Mail app that says in part:
"Your message has size 30.3MB, which exceeds 28.3MB, the maximum allowed by server:"
The unzipped PDF is 24.7 MB which could not be sent, so I zipped it (22.1 MB) and this will not go either. Perhaps the way to beat this is to break the PDF into two zipped segments but right-clicking on the file does not offer that option. The only choice I see is the 'Compres ...' option.
Any help will be appreciated.

Ok solved the issue. It was rights within the report.
It has been fixed now.
"You need to give the user and the report the schedule rights. One option would be to add another group and call it "Schedule for" then assign the scheduling rights to the group and add the needed users to the group.... Works like a charm."
[http://www.forumtopics.com/busobj/viewtopic.php?t=65458]
taken from the above link.

Similar Messages

I cannot send mail rejected by server does not allaow relaying

Im having trouble sending mail. The server doesnt allow relaying

If you are having trouble sending mail and all of the following are working properly:
Data connection
Wi-Fi connection
Cellular service
Then the issue probably lies with you SMTP server, even though these steps can be redundant i would try the Following:
1. Try toggling airplane mode on for 30 seconds, then turn it off-Test mail
2. Restard the phone-Test mail
3.If using wi-fi connection disconnect/reconnect(if it still doesnt work) try forget all network settings, then reconnect to the network once again.
4.If none of those work, depending on who you e-mail service provider is, it may be an issue with their servers and i would contact them to check.

Cannot send emails, because the server does allow relaying

since i've updated IOS 7 I cannot send emails, because the server does NOT allow relaying. None of the proposed solutions helped.

Go to Settings > Mail, Contacts, Calendars > Your Account > Account Name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and enter your email account and password. See if doing that fixes things.

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

I suspect that beautify doesn't touch CSS that it is not aware of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
Randy

I have the doc on my screen as an adobe but I cannot make changes? The browser does not locate it?

I have the doc on my screen as an adobe but I cannot make changes? The browser does not locate it?

Hi,
Are you opening a PDF file in browser and trying to edit the PDF file there?
Please let me know in more details.
In general most PDF files cannot be edited in browser and some PDF can be edited with the permission for editing in browsers.
Thank you.
Hisami

You cannot debug this SWF because it does not contain ActionScript

Im working with flash, everything is good. I've exported my movie it works fine. But i fell its a little fast.
So i go to drop the frame rate from default 12 to 8 just to see how it looks. I play it and i like it. Next thing i know when i go to hit 'share' to export the movie again the button is replaced by 'Debug'. I go into it and hit 'Debug Movie' then thats when i get the message "You cannot debug this SWF because it does not contain ActionScript".
Now if i start any new projects or open any exsisting ones it still has this debug thing going on.
How do i fix it and get it back to normal so i can export videos?
Thanks

I have exactly the same problem. AS3 just seems not to be
compiled/interpreted at all. With a very simple 'trace' line as
mentioned in previous posts, you just need to click on the 'check
code' button and you will got the error saying that your code
contains error (of course the same experience works just fine on a
working CS3 installation on another computer).
So far I have been through several install/uninstall
processes without any change. It looks like Flash does not found
needed components/libs for compiling/interpreting AS3 code... Error
messages that all of us have seen are just kind of side effects of
the real problem.
Is there a way to initiate and access flash log files/system
error events/dll load tracer where we would be able to see what
flash is looking for and obviously it does not find
(files/libs/whatever)?!
In my case, I'm running CS3 on windows XP Pro SP2 installed
on e: (not c: ... which may be also something to consider)
... very very annoying to waste time that way... and I guess
it will be worst once we will have confirmation that this is just a
misunderstood or broken path to a lib file... usually the stranger
is the effect, the stupidest is the reason...
sorry no solution here, just another name in the
stack.

I cannot download Lightroom CC because it does not show up on my Creative Cloud Application Manager. How do I fix this?

I cannot download Lightroom CC because it does not show up on my Creative Cloud Application Manager. How do I fix this?
I have Windows 8 and am currently using the entire Adobe Suite Package for my account.

do you have a 64 bit os?

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

ERROR: Cannot start mail services, configuration directory does not exist

I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?

Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff

The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do?

The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.

If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

Google mail tells me that I have an outdated version of Firefox which it does not support. I have Firefox 8.0.1. Why is there a problem?

Google mail tells me that I have an outdated version of Firefox which it does not support. I have Firefox 8.0.1. Why is there a problem? I am using OSX 7.2
When trying to access the URL after startup or waking the computer, I get the following message
sec_error_ocsp_server_error
The I will get a message that my version of Firefox will not work with google mail.

You can check the OCSP settings.
*Firefox > Preferences > Advanced > Encryption: Certificates > Validation:
*[X] "Use the Online Certificate Status Protocol (OCSP) to confirm the current validity of certificates"
*[X] "Validate a certificate if it specifies an OCSP server"
*[ ] "When an OCSP server connection fails, treat the certificate as invalid"

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

The "Adobe PDF" menu choice does not appear on Excel Menu

I've installed Acrobat 9.1.2 and the "Adobe PDF" menu choice does not appear on the Excel 2000 Menu. I have uninstalled and reinstalled the Microsoft Office option in PDF Maker with no change. It does appear on the Word 2000 Menu. Adobe 8.1.3 shows on all apps of Microsoft 2000 (on different computers.)

According to Version Compatibility of Acrobat PDFMakers Office 2000 is not suupported by Acrobat 9.

Creating pdf from clipboard does not import images or formatting

Creating PDF from clipboard works perfect in acrobat X however in acrobat XI no images are imported and the text just defaults to times roman font. My wife uses acrobat for her craft patterns and copies from the web all the time with no issues in Acrobat X. She tried it on Acrobat XI and it just looks like garbage. The text is there but the images that were copied along with the text are not. I have examples that she did using the exact same clipboard in both X and XI.

Bill@VT wrote:
I guess I must not understand how you are transferring the items to the clipboard. Is the browser the same one you used with AA X?
Yes, I used the same browser (Chrome) with AA X and AA XI.
Bill@VT wrote:
When I did it with AA XI, I used the mouse (on a PC) to select the text and figures in my browser and copied that info to the clipboard (ctrl-C on the PC and I assume similar on the MAC).
Yes, the procedure for copying info to the clipboard is similar for a Mac and a PC. I select the info (in this case, text and graphics) with the mouse, and can copy it to the clipboard with either Command-C (Mac equivalent of ctrl-C), or by right-clicking on the highlighted info and choosing "copy" from the pop-up window. I do not have to use Print Screen in conjunction with this procedure. If I use Print Screen, it copies everything that my monitor displays and the results of a paste are an image.
Is there something I am missing about getting the web page parts wanted to the clipboard? If you clip the items into a graphics packages, does the graphics show up as desired?
No, you are not missing anything. All of the web page parts are in the clipboard. The problem is that only the text is showing up when I use the create PDF from clipboard option in AA XI. I do not have a graphics package installed; however, if I paste the clipboard contents into Word, both the text and graphics show up.
I checked the PDF created with my AA XI and found the text as text and the the graphic as graphic, not simply a graphic as you suggested. Is it possible the graphic is shown with a place holder or just space for the graphic. If that is the case, check the preferences that you have "view large images" turned on.
As I explained ad nauseum, the PDF I try to create with AA XI using create PDF from clipboard does not include the graphics; it only has the text. I just checked the preferences and "view large images" is turned on. I could not find any other preference settings that would seem to help with the problem I am having.
I can paste the clipboard contents directly into Word and print the document to a PDF. When I do that, though, I usually have to spend a lot of time editing the Word document, because the contents are not in the same format. The paragraphs are usually squashed together, or the photos are too large and I have to change the size. This just takes up more time than I have to spend.
The bottom line is that it seems to me Adobe must have changed something in the Mac version of AA XI that causes it to not work the same way it does in AA X. The PC version is obviously okay, because you are able to get the feature to work.
I guess I am going to have to give up on this problem and stick with using AA X.
Thanks again for all your help.

Cannot send compressed PDF which is does NOT exceed MAX size?

Similar Messages

Maybe you are looking for