Cannot send from Outbox

I am using Mavericks and Mail 7.3.  When I try to reply to or forward a message it goes to the outbox and stays there.  I cannot send from the outbox.  There is no paper airplane in the tool bar unless I go to message, select send, and go back to the outbox.  The message activity in the side bar does not show any activity when I hit send. HELP!
Thank you.

Can you successfully create and send new email messages?

Similar Messages

  • I receive emails from my provider but cannot send from my iPad without connecting to my email online

    I cannot send emails from my iPad without connecting to my provider.
    Can anyone help please

    Are your E-mail account settings correct? e.g. POP3 and SMTP settings..

  • Cannot send from one sunjes user to another after initial email

    This is most annoying I have installed a sunjes 5 install , did a test email e.g. fgrom jdoe@xxxxx to jdoe@xxx, received it and though that was ok , however since then I cannot send anything else I can send to an exchnage adddress no problem but sunjes to sunjes - no way.
    Email shows up in the sent items but not i the inbox where I want it , I have rebooted the zone, stopped/started services , no joy and do not have any error messages.
    Nothing has chnaged since th einstall and there are no space issues.
    Does anyone have any idea as sunjes/ communications express is useless in help messages etc

    hi Shane,
    thanks for that a) there i nothing held in the queue , b) this is the output from the logging - any ideas?
    [23/Jun/2008:11:31:26 +0100] comms5-qa httpd[7755]: Account Notice: close [192.168.230.202:50169] [unauthenticated] 2008/6/23 11:31:19 0:00:07 1722 1895 0
    [23/Jun/2008:11:31:35 +0100] comms5-qa httpd[7755]: Account Notice: close [192.168.230.202:50185] [unauthenticated] 2008/6/23 11:31:26 0:00:09 953 854 0
    [23/Jun/2008:11:32:03 +0100] comms5-qa httpd[7755]: Account Notice: close [192.168.230.202:50256] [unauthenticated] 2008/6/23 11:31:58 0:00:05 953 854 0
    [23/Jun/2008:11:35:00 +0100] comms5-qa httpd[7755]: Account Notice: close [127.0.0.1:50609] [unauthenticated] 2008/6/23 11:35:00 0:00:00 17 236 0
    [23/Jun/2008:11:42:02 +0100] comms5-qa httpd[7755]: Account Notice: close [192.168.230.202] jdoe 2008/6/23 11:27:54 0:14:08 0 0 1
    [23/Jun/2008:11:42:08 +0100] comms5-qa httpd[7755]: Account Notice: close [192.168.230.202:51471] [unauthenticated] 2008/6/23 11:42:02 0:00:06 209 450 0
    [23/Jun/2008:11:43:10 +0100] comms5-qa httpd[7755]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.3-0.15 (built Feb 9 2007) shutting down
    [23/Jun/2008:11:43:52 +0100] comms5-qa httpd[9286]: General Warning: mscertd_initialize: configuration has SMIME disabled
    [23/Jun/2008:11:43:52 +0100] comms5-qa httpd[9286]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.3-0.15 (built Feb 9 2007) starting up
    [23/Jun/2008:11:45:01 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:51937] [unauthenticated] 2008/6/23 11:45:01 0:00:00 17 236 0
    [23/Jun/2008:11:52:45 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:52852] [unauthenticated] 2008/6/23 11:52:35 0:00:10 5212 5298 0
    [23/Jun/2008:11:52:53 +0100] comms5-qa httpd[9286]: General Notice: jdoe[192.168.230.202:52883] created message <[email protected]>
    [23/Jun/2008:11:52:58 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:52883] [unauthenticated] 2008/6/23 11:52:53 0:00:05 1213 418 0
    [23/Jun/2008:11:55:01 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:53140] [unauthenticated] 2008/6/23 11:55:01 0:00:00 17 236 0
    [23/Jun/2008:12:00:45 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:53801] [unauthenticated] 2008/6/23 12:00:40 0:00:05 953 854 0
    [23/Jun/2008:12:03:17 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:54109] [unauthenticated] 2008/6/23 12:03:12 0:00:05 845 395 0
    [23/Jun/2008:12:03:26 +0100] comms5-qa httpd[9286]: General Notice: jdoe[192.168.230.202:54132] created message <[email protected]>
    [23/Jun/2008:12:03:31 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:54132] [unauthenticated] 2008/6/23 12:03:26 0:00:05 1201 418 0
    [23/Jun/2008:12:05:01 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:54314] [unauthenticated] 2008/6/23 12:05:01 0:00:00 17 236 0
    [23/Jun/2008:12:15:01 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:55518] [unauthenticated] 2008/6/23 12:15:01 0:00:00 17 236 0
    [23/Jun/2008:12:25:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:56693] [unauthenticated] 2008/6/23 12:25:00 0:00:00 17 236 0
    [23/Jun/2008:12:35:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:57855] [unauthenticated] 2008/6/23 12:35:00 0:00:00 17 236 0
    [23/Jun/2008:12:45:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:59042] [unauthenticated] 2008/6/23 12:45:00 0:00:00 17 236 0
    [23/Jun/2008:12:55:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:60201] [unauthenticated] 2008/6/23 12:55:00 0:00:00 17 236 0
    [23/Jun/2008:13:05:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:61373] [unauthenticated] 2008/6/23 13:05:00 0:00:00 17 236 0
    [23/Jun/2008:13:15:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:62592] [unauthenticated] 2008/6/23 13:15:00 0:00:00 17 236 0
    [23/Jun/2008:13:25:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:63799] [unauthenticated] 2008/6/23 13:25:00 0:00:00 17 236 0
    [23/Jun/2008:13:34:30 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:64962] [unauthenticated] 2008/6/23 13:34:20 0:00:10 3758 4381 0
    [23/Jun/2008:13:35:00 +0100] comms5-qa httpd[9286]: Account Notice: close [127.0.0.1:65046] [unauthenticated] 2008/6/23 13:35:00 0:00:00 17 236 0
    [23/Jun/2008:13:37:35 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:65377] [unauthenticated] 2008/6/23 13:37:30 0:00:05 591 307 0
    [23/Jun/2008:13:37:52 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:65409] [unauthenticated] 2008/6/23 13:37:41 0:00:11 3163 4055 0
    [23/Jun/2008:13:38:25 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202] bobbyb 2008/6/23 13:34:20 0:04:05 0 0 1
    [23/Jun/2008:13:38:44 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:65494] [unauthenticated] 2008/6/23 13:38:25 0:00:19 209 450 0
    [23/Jun/2008:13:38:44 +0100] comms5-qa httpd[9286]: Account Notice: close [192.168.230.202:65495] [unauthenticated] 2008/6/23 13:38:25 0:00:19 209 631 0

  • Cannot send from mail

    I am using 10.4.7 and i cannot send any mail from mail program. No problem sending with Entourage (settings are the same). Also, when I type in a message in Mail, as soon as i type a space, i cannot add anything after that - strange.
    G5 Dual   Mac OS X (10.4.7)  

    This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
    Resolving Disk, Permission, and Cache Corruption
    It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Click Maintenance. In the Reset section, check LaunchServices database.
    4. You may uncheck any other pre-checked options if you wish.
    5. Click the Execute button.
    6. Restart the computer.
    7. If the problem persists, try again checking the Links between documents and applications option in step 3 instead.

  • HT1146 cannot send from my pc to any shawmail account (@shaw.ca)

    If I am in the wrong community (which I probably am as I can't find one that pertains to my specific problem) please redirect me.  Everyone seems to be blaming everyone else!  I can send from my @me account to shawmail users.  Apparently my IP address has been blacklisted within the past week.  Before that, I had no problems.  And, I am definitely not a spammer. 
    Here are my responses and the exact postmaster error message:
    Aswer from Shaw:
    It depends on the outgoing server used, but the server IP in the error message,17.172.81.1, was blacklisted.
    You can try contacting Apple, but they should be aware
    Error message:
    Diagnostic code: smtp;554-idcmail.shaw.ca Your connection from 17.172.81.1 has been rejected due to poor reputation.
    Remote system: dns;idcmail.shaw.ca (TCP|17.172.81.1|51858|24.71.223.11|25) (idcmail.shaw.ca

    Sorry - meant to say I CANNOT send to shawmails.

  • Mail will not send from outbox (sometimes)

    Suddenly, with no changes made to mail, or anything else, I'm getting a pop-up everytime I try to send some mail from Mail.
    Pop up states: "Cannot send message using server smtp.mac.com
    Use the pop up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings. "
    Anyone? Coincidentally (or not) my .mac membership just got auto renewed. Wondering if it's connected to this problem.

    Are you also accessing an email account and SMTP server with the Mail.app that is provided by your ISP used for connecting to the internet?
    If so, are you able to send messages with this account?
    Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
    If 25 is entered in the Server Port field, change it to 587 and when finished, select OK to save the changed setting.
    Coincidentally (or not) my .mac membership just got auto
    renewed. Wondering if it's connected to this problem.
    Possibly but more likely your ISP made a recent change regarding the use of SMTP servers that are outside of their network or not provided by the ISP without informing you.

  • Cannot send from aol

    I can recieve from my aol account but cannot send or forward. I've deleted and restarted more than once.

    Go back into the email account and look at your outgoing mail server you may need to enter a password for it.   should be the same password as your incoming mail server.

  • Please help cannot send from bluetooth phone to brand new macbook.

    i just recently upgraded to a macbook, and after using my old ibookg4 to recieve pics from my mobile phone [LG viewty] i wanted to do the same again! but no lck i have restarted both mac and phone and it hasnt made a difference. i can send to my phone from mac but not from mac to phone. Please help....all appreciated

    Same problem here - with my Nokia N73. It finds the computers - a Macbook and a Mini - but cannot connect to send photos to them.
    The error message on the phone is : Unable to Connect.
    They both seem to work on it for a couple seconds and various BT icons blink and act as if they are about to do something, but then they give up.
    I checked Sharing and it is enabled.
    I have gone through the pairing process - everything looks fine... but it just won't connect.
    I forget when it stopped working, but it used to.
    Any suggestions would be welcome.
    Wiv

  • I cannot send from one specific BT Mail account but can access folders using IMAP.

    Thunderbird 31.3.0 on WIndows 8.1 64 bit.
    I have two email accounts configured into Thunderbird.
    Both are BT accounts and have identical configurations.
    IMAP is used for reading mail, SMTP for sending mail.
    On one I can read folders, delete emails from the Bulk Mail folder, fetch and send mail.
    On the other I seem to be able to do everything except send mail.
    I can read mail, delete SPAM, but for some reason not send emails.
    Both accounts are using "mail.btinternet.com" as the IMAP and SMTP server.
    I am using Thunderbird as a back up email client to deal with a very few messages which cause major problems with my main email client which is Windows Live Mail 2012. I have double checked and the mail server details are the same between the two and my WLM client can send emails to the same SMTP server on the same port as Thunderbird fails on.
    I know the password is correct because I can connect over IMAP and delete SPAM using Tbird.
    The only difference that I can see between the two accounts is that one is "@btinternet.com" and the other is "@talk21.com".
    The symptoms - I see the progress bar with "Connected to mail.btinternet.com..." and green all the way across.
    Some time later I get a separate warning saying "Login to server mail.btinternet.com failed".
    Because of the time delay I am assuming that the session has timed out.
    I am also assuming that if the credentials were wrong the rejection would have been immediate (although the delay may be to reduce the effectiveness of brute force attempts to guess the password).
    So I know that the IMAP credentials are O.K. - I can access the mailbox.
    I know that the SMTP credentials are O.K. - I can send mail from WLM using the same settings.
    Further confusion - I know that it worked in the past because I have a test message in my Sent mail from when I first set up Tbird.
    This is all very weird.
    Has anyone else seen something similar?
    Also, is there a debug option where I can trace the SMTP protocol when the email is being sent?
    Cheers
    LGC

    Update: - I sent two separate test messages and saved both the failing emails as Draft to retry after restarting Tbird.
    I've just noticed that they are both in a Drafts folder on my mail server.
    Not, however, the Drafts area for emails composed using the web mail client but under a separate Folders tree.
    I can't send the email with the web mail client, although I can forward it.
    So further proof that the IMAP side is working.

  • TS3899 Is anyone else having issues sending emails? I cannot send from gmail, hotmail or yahoo via iPhone 5! I've deleted accounts and restarted phone with no luck..

    For a few days now, I am unable to send emails on any account! I've tried gmail, yahoo and outlook. I've deleted the accounts and added them again..did not fix the problem. I've restarted my phone, that didn't work either. Is there a fix for this?

    Backup the device in iTunes.
    Restore as new.
    Setup one account on the device and test.  If it works, set up the other accounts one at a time and test.  If this works, there is some screwy setting in your backup that is the culprit.
    If this does not work, restore from the backup created in the first step to get all your data back/settings back.

  • I cannot send from macmail to an aol address

    When trying to send a message from macmail to an aol address I get the email pinged back with permanent error messafge
    Any suggestions gratefully received
    Kierenttc

    And is it just one AOL address or all AOL addresses?

  • My e-mails won't send from outbox

    I can receive emails, but when I try to send, they just sit in the outbox.  also, all of my servers say they are offline

    Information.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    When you select a server is there any information in the Show Detail box? If so, take a screen shot of the box (command - shift - 4) and attach it to a reply using the camera icon in the menu bar. Make sure you use Preview to cover any personal information before posting.

  • ICloud Mail cannot send from iCloud address

    when sending a reply to a friend using iCloud will not send out

    What SMTP server is selected for your iCloud account?
    Do you receive an error?

  • Enabled RBL - Cannot send from dynamic address ranges

    I have recently enabled some RBL on my mail server to help combat some spam problems that have been starting. Unfortunately, some users can no longer send email through my server when they are working remotely. I am pretty sure they are being blocked because they are on dynamic address ranges (Comcast home accounts and Verizon air cards).
    Is there a way to:
    1) (preferred) Allow SMTP to go through without looking up the RBL (white-listing) based on SMTP authentication? This way they could me anywhere and always be able to send.
    or
    2) How do I white-list address ranges so that they can send through.
    Thanks

    Based on your reply, it sounds like postfix processes its config in a top to bottom fashion. It now makes sense to me that it must be getting to the RBL's before authentication. Below is my postconf, any help would be greatly appreciated. Thanks
    xserve0:~ root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debugpeerlevel = 2
    enableserveroptions = yes
    html_directory = no
    inet_interfaces = all
    mail_owner = postfix
    mailboxsizelimit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    mapsrbldomains =
    messagesizelimit = 0
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.intrix.org,intrix.org
    mydomain_fallback = localhost
    myhostname = xserve0.intrix.org
    mynetworks = 127.0.0.1/32,64.193.94.128/28,75.0.0.0/8
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    ownerrequestspecial = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpdclientrestrictions = permit_mynetworks rejectrblclient zen.spamhaus.org rejectrblclient dnsbl.sorbs.net rejectrblclient list.dsbl.org rejectrblclient bl.spamcop.net permit
    smtpdenforcetls = no
    smtpdpw_server_securityoptions = cram-md5,gssapi,login
    smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
    smtpdsasl_authenable = yes
    smtpdtls_certfile = /etc/certificates/Default.crt
    smtpdtls_keyfile = /etc/certificates/Default.key
    smtpduse_pwserver = yes
    smtpdusetls = yes
    unknownlocal_recipient_rejectcode = 550
    virtualmailboxdomains = hash:/etc/postfix/virtual_domains
    virtual_transport = lmtp:unix:/var/imap/socket/lmtp
    xserve0:~ root#

  • Cannot send email from my 4S on my ISP account (essex1).

    I recieve an error message that tells me that the recipient (email addy) was rejected by the server.  My ISP provided the required settings; still cannot send from my iPhone. 
    I recently upgraded to the newer IOS.
    A bit of help, please!

    First you have to find out on what PORT the SMTP your "College" is allowing through there firewalls. Then in Mail go to the Mail menu item name "Mail" and in it's drop-down select Preferences. Then click on the account for your "College" email servers. Then in the right-hand pane use the SMTP drop-down to edit the SMTP server settings to the SMTP server port your "college" is allowing through.maybe port 587.

Maybe you are looking for

  • Af: table color dyanmic

    HI , Using jdev 11.6 . I have requirement to show the table row/column  in different color based on the some conditions . i have achieved by overriding the postQuery method and setting the color in transient attribute in voimple. My questions related

  • Line Chart Functionality

    Hi: I would like to add points to a group of LineSeries in a LineChart. I would like the graph line to increase to the right as the points are added. For example if I have 10 points presently, they fill the entire x axis, and as I add points the gaps

  • I cannot access the Window, it's out of range

    Okay, So I open my application (The one I'm opening is Native Instruments - Massive), even though the application is fully functioning, the window is no where to be seen. It's opened, because the window appears on Mission Control. When I hold down th

  • IPhone to AirPrint. Emails come out small and don't fit page

    iPhone to AirPrint. Emails come out small and don't fit page

  • Packaging and Delivering AIR Apps

    Hi Guys, I have an issue. I have a config file in my air application that I want change depending on what user it is being delivered to. The number of users could be extremely large, possibly in their hundreds so to have to change the config file aga