Cannot send mail to Yosemite Server

I have Yosemite Server on a Mac Mini Server.
I cannot receive mail to the Server. ( i.e. they are sent back to the sender ) Here is an example of the error.
<[email protected]>: Host or domain name not found. Name
service error for name=example.com type=AAAA: Host found but
no data record of requested type
Reporting-MTA: dns; svr1.example.com
X-Postfix-Queue-ID: E553639C4621
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Wed, 25 Feb 2015 13:44:35 -0600 (CST)
Any ideas???
Best Regards,
Neil

Could be the DNS as Lync Davis writes but to elaborate somewhat:
It's not enough to have the DNS in the server itself. At a standard setup that will only be used by the server to find itself. Senders must also be able to look up the mail server's full domain name which means that you must have those records in a public DNS server so that clients sending mail can look up the server. Local clients might get settings via DHCP to use it as DNS server and if it's accessible from Internet on port 53 it could be used as a public DNS server (set in the settings for you domain at the registrar, by them or yourself).

Similar Messages

I cannot send mail rejected by server does not allaow relaying

Im having trouble sending mail. The server doesnt allow relaying

If you are having trouble sending mail and all of the following are working properly:
Data connection
Wi-Fi connection
Cellular service
Then the issue probably lies with you SMTP server, even though these steps can be redundant i would try the Following:
1. Try toggling airplane mode on for 30 seconds, then turn it off-Test mail
2. Restard the phone-Test mail
3.If using wi-fi connection disconnect/reconnect(if it still doesnt work) try forget all network settings, then reconnect to the network once again.
4.If none of those work, depending on who you e-mail service provider is, it may be an issue with their servers and i would contact them to check.

Cannot send mail from newsletter server and Server error: Unable to relay

We have newsletter server. Sometimes we sent mail by our exchange 2010 server. But recently we are unable to send mail to external mail server. we sent mail by newsletter server within a domain now. We need to solve. Pls. check below log file and provide
how to solve it.
Sender ID: [email protected]
our domain: www.silkways.net
LOG:
Status Msg : The email details entered successfully into the database.
Status Msg : The email details entered successfully into the database.
Access Level : 1
MAIL SENT TO : [email protected]
FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]SMTP server error: 5.7.1 Unable to relay

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 5.5.2 Sender already specified

FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]SMTP server error: 5.7.1 Unable to relay

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 5.5.2 Sender already specified

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 4.7.0 Too many errors on this connection, closing transmission channel

FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]SMTP server error: 5.7.1 Unable to relay

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 5.5.2 Sender already specified


Hi,
Since you are able to send emails to internal domain i assume the application server IP address already allowed into Receive Connector.
To relay application emails to external domain you should enable Externally Secured box in the Authentication Tab of the particular Receive Connector.
Kottees :My Blog Please mark it as an answer if it really helps you.

Cannot send mail from any mail account

I have a Mac Mini, late 2014 model, running OS X Yosemite version 10.10.2. I have constant difficulty sending mail from any of my mail accounts; these are iCloud, Googlemail, Yahoo and a personal one which uses 123-reg.co.uk. I am currently located in Greece, but have been having trouble for ages, even in the UK. I can receive mail, but I don't seem able to send it. Error message is usually simply cannot send mail using this server, select a different server. However, when connection doctor is run, all servers appear to be connected and I am logged in. Any ideas please?

rosiehwilson wrote:
Hi, not sure why that is relevant, but we arrived at the end of January this year. Here is a screen shot of a recurring problem, although in this case Gmail is not connected to the internet, which it usually is. Hope this helps.
Your outgoing Gmail servers not working, everything else seems OK.
So, what is not working for you (other than Gmail Sending)

Cannot Send Mail using AIM account.

I can receive mail fine but when I try to send mail I get the following message:
Cannot send mail using the server smtp.aim.com:EmilyLozano.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: Emily Lozano <[email protected]>
I left for a trip a few days ago, came back and now for no apparent reason cannot send mail as I always have. I have reconfigured the port to 587 and that did not help. Any suggestions? (I can send and receive fine via the web, but I really hate it.)

I'm glad you got it figured out. So many times people on this forum sit around waiting for help when they could have retraced their steps, like you did, to figure out the source of the problem.

I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server" can't see to figure out why it stopped sending now.

I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server" cannot understand why this is happening and have not been able to fix. Now when I try to send pictues even to another email address I am getting the same message.
Help.

Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11

I have 5 email accounts. On one account I receive email, however, in responding to the email from this one account I get the following message "Cannot send Mail" A copy has been placed in ur outbox. The recipient was rejected by the server?

when I respond to the email message I get the following: Cannot Send Mail -- A copy of this message has been placed in your Outbox. The recipient "[email protected]" was rejected by the server?

when I respond to the email message I get the following: Cannot Send Mail -- A copy of this message has been placed in your Outbox. The recipient "[email protected]" was rejected by the server?

I updated to 5.0 today and now when I try to email from my phone, I am thwarted by the pop-up, "cannot send mail. a copy has been placed in my outbox. the recipient (email address) was rejected by the server. I need help, please.

I updated to 5.0 today.
Now, when I try to email from my phone, I am block, thwarted, rejected by the following message:
Cannot Send Mail
A copy has been placed in your Out Box. The recipient (enter email here) was rejected by the server.
This happens with my business address. Receiving works.... sending doesn't.
My SBC Global address on this same phone is fine...receiving and sending.
What to do? I'm stressed.
Ray

Hi,
I had the same issue on my iPhone 5S. My internet/email provider told me to uncheck (turn off) USE SSL under Mail settings, and it worked perfectly for me.

Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

Hi,
Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
Does anyone have any suggest course of actions to take?
Many Thanks

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

HT3228 I set up my work e-mail on iphone. When I try to send an e-mail, an error code says "Cannot Send Mail", "recipient rejected by server because it does not allow relaying". What does this mean and how do I correct it?

I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?

Get the correct mail server settings from your IT department.

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.

The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T.

Cannot send mail A copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying.

"Cannot send mail
A copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying."
How can I fix my email? Now when I try to send an email I get the above message. It was working for months now it just quit on my ipad2, (but it still works on my iPad1 not updated to 5.0 operating system)? Help!?
Thanks,

Try going into the account's outgoing SMTP server settings, and if they are not already filled in add your account id and password to the outgoing settings : Settings > Mail, Contacts, Calendars and then select the account the account on the right-hand side and go onto into it's SMTP server settings

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

Cannot send mail - server does not allow relaying

I keep getting a sporadic error message on my ipad: "cannot send mail. The recipient was rejected by the server because it does not allow relaying". Sometimes it doesn't happen and the mail sends fine. Sometimes I get the error message but the message then sends later. Sometimes it never sends.
Can anyone help?

Hi, I've suddenly encountered this problem. I have a 1st gen iPad. I've reset, deleted, re-added, turned on both outgoing servers, added my password--this last doesn't stay in the primary outgoing server field; when I go back in, the password field is filled with the (optional) text again and when I 'click' into the authentication box, the password is no longer checked. However, these are all filled in the secondary outgoing server, so it shouldn't matter. Restarted the iPad a couple times. Using system 5.1.1--I think that's as far as I can go. Any miracles out there?

Cannot send mail to Yosemite Server

Similar Messages

Maybe you are looking for